Problems with 6.2.0

[John C. Toman]

I was noticing some errors on a software RAID I'm trying to put together 
on a 29160. There are 5 Quantum 36.7GB 7200 RPM drives, and a SCSI tape 
drive on the bus. Here's the dmesg output:

064 blocks.
PCI: Found IRQ 5 for device 00:0e.0
3c59x.c:LK1.1.15 6 June 2001  Donald Becker and others. 
http://www.scyld.com/net
work/vortex.html
See Documentation/networking/vortex.txt
00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc000,  
00:50:da:b9:b8:07, IRQ 5
  product code 5842 rev 00.12 date 11-30-99
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 786d.
  Enabling bus-master transmits and whole-frame receives.
00:0e.0: scatter/gather disabled. h/w checksums enabled
eth0: using NWAY device table, not 8
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
Use of setserial/setrocket to set SPD_* flags is deprecated
hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
VFS: Disk change detected on device ide1(22,0)
... same lines deleted
(scsi0:A:9:0): Locking max tag count at 64
VFS: Disk change detected on device ide1(22,0)
... same lines deleted
(scsi0:A:0:0): Locking max tag count at 64
VFS: Disk change detected on device ide1(22,0)
... same lines deleted
(scsi0:A:10:0): Locking max tag count at 64
VFS: Disk change detected on device ide1(22,0)
... same lines deleted
(scsi0:A:12:0): Locking max tag count at 64
VFS: Disk change detected on device ide1(22,0)
... same lines deleted
(scsi0:A:11:0): Locking max tag count at 64
VFS: Disk change detected on device ide1(22,0)
... same lines deleted
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
scsi0:0:9:0: Attempting to queue an ABORT message
scsi0:0:9:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
~

Things work for while and then the lock up occurs.

Help!

John


To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message