pre10 on a 2940u2w still shows BRKADRINT

[felix at halef.rhrz.uni-bonn.de]

Hi,
I've got the same problem here with a standard kernel 2.0.35 patched with
the pre10. However, the those errormessages (0x17 1.time 0x1 after that) do
show up only after reset, when the machine is warm. Turning off power for a
while helps. While the system is up, i can't see any problems.
My System is a P2 Asus P2BS.

On Thu, Sep 17, 1998 at 04:01:54PM -0700, Neil Magedman wrote:
> 
...
> I installed pre10 using the the rpm kernel-* files.  After an initial
> hurdle of not having an initrd prepared (the pre5 was monolithic), I ran
> into a similar BRKADRINT bug.  Whereas the pre5 would loop with
> 	Data-Path Ram Parity Error
> 	PCI Error Detected
> 	(scsi 0) SEQADDR = 0x50
> the pre10 kernel would loop with
> 	Data-Path Ram Parity Error
> 	(scsi 0) SEQADDR = 0x17d	[the first time]
> 	(scsi 0) SEQADDR = 0x1	[subsequent times]
...
> regards,
> neil
> 
> To Unsubscribe: send mail to majordomo at FreeBSD.org
> with "unsubscribe freebsd-aic7xxx" in the body of the message

To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe freebsd-aic7xxx" in the body of the message