5.0.18 on 2.1.105 two controllers (MMAP Memory strangeness)
Doug Ledford
dledford at dialnet.net
Thu Jun 11 00:58:47 PDT 1998
Mark Anthony Lisher wrote:
>
> I have to scsi controlers (one on the motherboard). After upgrading to
> 5.0.18 the 'MMAP Memory' has changed to 0x0 were as on the 5.0.13 it was
> 0xcc800000 and scsi0 was at 0xcc802000.
>
> Is this correct?
Yes, on 7850 class chipsets we disable the MMAPed I/O. This was originally
done for some buggy 7850 chipset cards, but it appears Justin's latest
sequencer may make this unnecessay, so it may go back to normal later.
>
> I have also been having the "Bad scbptr 255 during SELTO" problem
>
> (scsi0:-1:-1:-1) Bad scbptr 255 during SELTO.
> (scsi0:-1:-1:-1) Referenced SCB 255 not valid during SELTO.
> SCSISEQ = 0x12 SEQADDR = 0xb SSTAT0 = 0x15 SSTAT1 = 0x8a
>
> and problems when boot with repeated resets.
Grab the 5.0.19-2.1.105 patch from my ftp site.
--
Doug Ledford <dledford at dialnet.net>
Opinions expressed are my own, but
they should be everybody's.
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx
mailing list