Linux 2.0.34+aic7xxx-5.1.0pre4: Problem with Intel R440LX motherboard

[Dimitrios Lambrinos]

>Date: Sat, 18 Jul 1998 18:27:54 +0800 (HKT)
>From: "Richard Neal G. Plana" <richip at mozcom.com>
>Reply-To: "Richard Neal G. Plana" <richip at mozcom.com>
>X-Loop: FreeBSD.org
>
>Hi,
>
>About a week ago, I wrote with a problem regarding an Intel R440LX based
>system with two 9GB SCSI harddisks. I've recompiled the Linux kernel using
>different version of the driver but always end up with the ff. kernel
>boot messages:
>
>scsi: aborting due to timeout: pid 9 scsi 0 channel 0, id 6, lun 0 0x12 00 00 00 00 ff 00
>SCSI host 0 abort (pid 9) timed out - resetting
>SCSI bus is being reset for host 0 channel 0.
>SCSI host 0 channel 0 reset (pid 9) timed out - trying harder
>SCSI bus is being reset for host 0 channel 0.
>(The previous four lines are repeated over and over again)

I got exactly the same with 2.1.108 and pre3-2.1.108 on a
ASUS P2B-S with two 4.5GB IBM DDRS-34560/UW hardisks and a Toshiba
XM-6201 CD-ROM.

I'm thinking of disabling the onboard SCSI controller and installing
another one (probably one based on the NCR-53c875). Any advise?

dimitri.

>
>NOTE: I use the newly compiled kernels with the RedHat 5.1 bootdisks which
>use initrd to load its initial root fs.
>



To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message