aic Driver problems
Justin T. Gibbs
gibbs at plutotech.com
Mon Sep 8 20:10:18 PDT 1997
>Doug and Dan,
...
>Next, I reverted back to the 2.0.31-pre9 driver (with the one-line fix
>that Dan suggested). The one-liner seems to have eliminated the kernel
>protection fault, but after scanning (successfully!) Chan. A of the
>controller, it cycles endlessly through the exact message above, with the
>addition of some debugging information:
>
>scsi0:0:1 Aborting SCB0, flags 0x401
>
>Abort reset flags 0x401
>
>while idle, LASTPHASE=0x1
> SCSISIGI=0xfa
> SEQADR=0x5
> SSTAT0=0x5
> SSTAT1=0x0
Almost sounds like the Linux driver isn't downloading TWIN support in
the sequencer download routine.
--
Justin T. Gibbs
===========================================
FreeBSD: Turning PCs into workstations
===========================================
More information about the aic7xxx
mailing list