i915 5.10.163 loosing external HDMI screen after a time, problem getting worse
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 25 Feb 2023 09:39:58 UTC
Hi all,
this is happening on a Thinkpad X1 Yoga 3rd Gen.
The external screen is first recognized as usual HDMI-1, but after
a while, faster if the screen goes into powersave, the external
screen vanishes from xrandr output, but mostly stays sort of
operational.
I mainly use keyboard-driven UI, and it's mostly noticeable using
mouse-driven menus, which pop up on the internal screen, quite
annoying.
Since I have to use a lot of mouse-driven apps currently it starts
to really slow down my work.
xrandr of a freshly started system:
mathiasp:~% xrandr
Screen 0: minimum 8 x 8, current 8128 x 3132, maximum 32767 x
32767
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right
x axis y axis) 310mm x 170mm
2560x1440 60.01*+ 59.95
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
2048x1152 60.00 59.90 59.91
1920x1200 59.88 59.95
1920x1080 59.96 60.00 59.93
1600x1200 60.00
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 60.00 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1368x768 60.00 59.88 59.85
1280x800 59.81 59.91
1280x720 59.86 60.00 59.74
1024x768 60.00
1024x576 60.00 59.90 59.82
960x540 60.00 59.63 59.82
800x600 60.32 56.25
864x486 60.00 59.92 59.57
640x480 59.94
720x405 59.51 60.00 58.99
640x360 59.84 59.32 60.00
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected 5568x3132+2560+0 (normal left inverted right x
axis y axis) 600mm x 340mm
3840x2160 30.00*+ 25.00 24.00 29.97 23.98
2560x1440 59.95
1920x1080 60.00 59.94 30.00 29.97
1600x900 60.00
1280x1024 60.02
1280x800 59.91
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94
HDMI-2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
xrandr output after the screen "vanished":
mathiasp:~% xrandr
Screen 0: minimum 8 x 8, current 8128 x 3132, maximum 32767 x
32767
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right
x axis y axis) 310mm x 170mm
2560x1440 60.01*+ 59.95
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
2048x1152 60.00 59.90 59.91
1920x1200 59.88 59.95
1920x1080 59.96 60.00 59.93
1600x1200 60.00
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 60.00 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1368x768 60.00 59.88 59.85
1280x800 59.81 59.91
1280x720 59.86 60.00 59.74
1024x768 60.00
1024x576 60.00 59.90 59.82
960x540 60.00 59.63 59.82
800x600 60.32 56.25
864x486 60.00 59.92 59.57
640x480 59.94
720x405 59.51 60.00 58.99
640x360 59.84 59.32 60.00
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected 5568x3132+2560+0 (normal left inverted right x
axis y axis) 0mm x 0mm
HDMI-2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
3840x2160 (0x7c8) 297.000MHz +HSync +VSync
h: width 3840 start 4016 end 4104 total 4400 skew 0
clock 67.50KHz
v: height 2160 start 2168 end 2178 total 2250
clock 30.00Hz
As seen, the virtual screen is also shown as disconnected but
works and sort of represents the external monitor and I can use
it, just every menu pops up on the internal screen.
* When did this start?
Since this mainly shows in popups, which I really use rarely, I
cannot say exactly, but it startet probably around March 2022.
Yeah, I'm late, but it took me a while to even figure out what was
going on, and then I got used to it, now I’m forced to use more
GUI programs and it is really annoying.
FreeBSD version
FreeBSD danton 13.2-PRERELEASE FreeBSD 13.2-PRERELEASE #0
stable/13-n254200-8497b431f19e: Mon Jan 30 12:56:25 CET 2023
mathiasp@danton:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
PCI Info
pciconf -lv
DRM KMOD version
drm-510-kmod 5.10.163
To Reproduce
Start X11 and work with it :)
Can take anywhere from 10 minutes to maybe two hours.
Additional context:
I'm now on the third HDMI cable.
There is nothing in xorg.conf.d mentioning screen configuration.
I played around with power saving settings, but it didn’t change
anything. My current settings in loader.conf:
# Disable frame buffer compression for power savings, does not
work
hw.i915kms.enable_fbc=0
hw.i915kms.disable_power_well="-1"
# Just try if guc firmware helps (doesn’t)
hw.i915kms.enable_guc=0
Neither messages nor Xorg.0.log show anything when this happens:
/var/log/Xorg.0.log
[ 38.511] (--) Log file renamed from
"/var/log/Xorg.pid-28321.log" to "/var/log/Xorg.0.log"
[ 38.512]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 38.512] Current Operating System: FreeBSD danton
13.2-PRERELEASE FreeBSD 13.2-PRERELEASE #0
stable/13-n254200-8497b431f19e: Mon Jan 30 12:56:25 CET 2023
mathiasp@danton:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
[ 38.512]
[ 38.512] Current version of pixman: 0.42.2
[ 38.512] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 38.512] Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??)
unknown.
[ 38.512] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb
23 12:21:31 2023
[ 38.514] (==) Using config directory:
"/usr/local/etc/X11/xorg.conf.d"
[ 38.514] (==) Using system config directory
"/usr/local/share/X11/xorg.conf.d"
[ 38.515] (==) No Layout section. Using the first Screen
section.
[ 38.515] (==) No screen section available. Using defaults.
[ 38.515] (**) |-->Screen "Default Screen Section" (0)
[ 38.515] (**) | |-->Monitor "<default monitor>"
[ 38.515] (==) No device specified for screen "Default Screen
Section".
Using the first device section listed.
[ 38.515] (**) | |-->Device "Intel Graphics"
[ 38.515] (==) No monitor specified for screen "Default Screen
Section".
Using a default monitor configuration.
[ 38.515] (**) Option "AutoAddDevices" "true"
[ 38.515] (**) Option "AutoEnableDevices" "true"
[ 38.515] (**) Automatically adding devices
[ 38.515] (**) Automatically enabling devices
[ 38.515] (==) Not automatically adding GPU devices
[ 38.515] (==) Automatically binding GPU devices
[ 38.515] (==) Max clients allowed: 256, resource mask:
0x1fffff
[ 38.517] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 38.517] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 38.517] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or
disable AutoAddDevices.
[ 38.517] (II) Module ABI versions:
[ 38.517] X.Org ANSI C Emulation: 0.4
[ 38.517] X.Org Video Driver: 25.2
[ 38.517] X.Org XInput driver : 24.4
[ 38.517] X.Org Server Extension : 10.0
[ 38.517] (--) PCI:*(0@0:2:0) 8086:5917:17aa:2259 rev 7, Mem @
0x2ffe000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64,
BIOS @ 0x????????/65536
[ 38.517] (II) LoadModule: "glx"
[ 38.518] (II) Loading
/usr/local/lib/xorg/modules/extensions/libglx.so
[ 38.523] (II) Module glx: vendor="X.Org Foundation"
[ 38.523] compiled for 1.21.1.4, module version = 1.0.0
[ 38.523] ABI class: X.Org Server Extension, version 10.0
[ 38.523] (II) LoadModule: "intel"
[ 38.523] (II) Loading
/usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 38.526] (II) Module intel: vendor="X.Org Foundation"
[ 38.526] compiled for 1.21.1.4, module version = 2.99.917
[ 38.526] Module class: X.Org Video Driver
[ 38.526] ABI class: X.Org Video Driver, version 25.2
[ 38.526] (II) intel: Driver for Intel(R) Integrated Graphics
Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854,
852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview
GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE,
G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 38.526] (II) intel: Driver for Intel(R) HD Graphics
[ 38.526] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 38.526] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 38.526] (--) Using syscons driver with X support (version
2.0)
[ 38.526] (++) using VT number 9
[ 38.544] (II) intel(0): Using Kernel Mode Setting driver:
i915, version 1.6.0 20200917
[ 38.544] (II) intel(0): SNA compiled:
2.99.917-916-g31486f40f8e8
[ 38.545] (WW) VGA arbiter: cannot open kernel arbiter, no
multi-card support
[ 38.547] (--) intel(0): gen9 engineering sample
[ 38.548] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3,
sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 38.548] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 38.548] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 38.548] (==) intel(0): RGB weight 888
[ 38.548] (==) intel(0): Default visual is TrueColor
[ 38.548] (**) intel(0): Option "AccelMethod" "sna"
[ 38.548] (**) intel(0): Option "DRI" "3"
[ 38.548] (**) intel(0): Option "TearFree" "true"
[ 38.550] (II) intel(0): Output eDP-1 has no monitor section
[ 38.550] (II) intel(0): Enabled output eDP-1
[ 38.550] (II) intel(0): Output DP-1 has no monitor section
[ 38.550] (II) intel(0): Enabled output DP-1
[ 38.550] (II) intel(0): Output HDMI-1 has no monitor section
[ 38.550] (II) intel(0): Enabled output HDMI-1
[ 38.550] (II) intel(0): Output DP-2 has no monitor section
[ 38.550] (II) intel(0): Enabled output DP-2
[ 38.550] (II) intel(0): Output HDMI-2 has no monitor section
[ 38.550] (II) intel(0): Enabled output HDMI-2
[ 38.550] (--) intel(0): Using a maximum size of 256x256 for
hardware cursors
[ 38.551] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 38.551] (II) intel(0): Enabled output VIRTUAL1
[ 38.551] (--) intel(0): Output eDP-1 using initial mode
2560x1440 on pipe 0
[ 38.551] (--) intel(0): Output HDMI-1 using initial mode
2560x1440 on pipe 1
[ 38.551] (**) intel(0): TearFree enabled
[ 38.551] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 38.551] (==) intel(0): DPI set to (96, 96)
[ 38.551] (II) Loading sub module "dri3"
[ 38.551] (II) LoadModule: "dri3"
[ 38.551] (II) Module "dri3" already built-in
[ 38.551] (II) Loading sub module "dri2"
[ 38.551] (II) LoadModule: "dri2"
[ 38.551] (II) Module "dri2" already built-in
[ 38.551] (II) Loading sub module "present"
[ 38.551] (II) LoadModule: "present"
[ 38.551] (II) Module "present" already built-in
[ 38.555] (II) intel(0): SNA initialized with Kabylake (gen9)
backend
[ 38.555] (==) intel(0): Backing store enabled
[ 38.555] (==) intel(0): Silken mouse enabled
[ 38.555] (II) intel(0): HW Cursor enabled
[ 38.556] (==) intel(0): DPMS enabled
[ 38.556] (==) intel(0): Display hotplug detection enabled
[ 38.556] (II) intel(0): [DRI2] Setup complete
[ 38.556] (II) intel(0): [DRI2] DRI driver: iris
[ 38.556] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 38.557] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 38.557] (II) intel(0): hardware support for Present enabled
[ 38.557] (II) Initializing extension Generic Event Extension
[ 38.557] (II) Initializing extension SHAPE
[ 38.557] (II) Initializing extension MIT-SHM
[ 38.558] (II) Initializing extension XInputExtension
[ 38.558] (II) Initializing extension XTEST
[ 38.558] (II) Initializing extension BIG-REQUESTS
[ 38.558] (II) Initializing extension SYNC
[ 38.558] (II) Initializing extension XKEYBOARD
[ 38.559] (II) Initializing extension XC-MISC
[ 38.559] (II) Initializing extension SECURITY
[ 38.559] (II) Initializing extension XFIXES
[ 38.560] (II) Initializing extension RENDER
[ 38.560] (II) Initializing extension RANDR
[ 38.560] (II) Initializing extension COMPOSITE
[ 38.560] (II) Initializing extension DAMAGE
[ 38.560] (II) Initializing extension MIT-SCREEN-SAVER
[ 38.561] (II) Initializing extension DOUBLE-BUFFER
[ 38.561] (II) Initializing extension RECORD
[ 38.561] (II) Initializing extension DPMS
[ 38.561] (II) Initializing extension Present
[ 38.561] (II) Initializing extension DRI3
[ 38.561] (II) Initializing extension X-Resource
[ 38.561] (II) Initializing extension XVideo
[ 38.562] (II) Initializing extension XVideo-MotionCompensation
[ 38.562] (II) Initializing extension GLX
[ 38.766] (II) AIGLX: Loaded and initialized iris
[ 38.766] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 38.766] (II) Initializing extension XFree86-VidModeExtension
[ 38.766] (II) Initializing extension XFree86-DGA
[ 38.766] (II) Initializing extension XFree86-DRI
[ 38.766] (II) Initializing extension DRI2
[ 38.770] (II) intel(0): switch to mode 2560x1440@60.0 on eDP-1
using pipe 0, position (0, 0), rotation normal, reflection none
[ 38.770] (II) intel(0): switch to mode 2560x1440@60.0 on
HDMI-1 using pipe 1, position (0, 0), rotation normal, reflection
none
[ 38.774] (II) intel(0): Setting screen physical size to 677 x
381
[ 38.831] (II) config/udev: Adding input device System mouse
(/dev/input/event0)
[ 38.831] (**) System mouse: Applying InputClass "evdev pointer
catchall"
[ 38.831] (**) System mouse: Applying InputClass "libinput
pointer catchall"
[ 38.831] (II) LoadModule: "libinput"
[ 38.831] (II) Loading
/usr/local/lib/xorg/modules/input/libinput_drv.so
[ 38.836] (II) Module libinput: vendor="X.Org Foundation"
[ 38.836] compiled for 1.21.1.4, module version = 1.2.0
[ 38.836] Module class: X.Org XInput Driver
[ 38.836] ABI class: X.Org XInput driver, version 24.4
[ 38.836] (II) Using input driver 'libinput' for 'System mouse'
[ 38.836] (**) System mouse: always reports core events
[ 38.836] (**) Option "Device" "/dev/input/event0"
[ 38.836] (**) Option "_source" "server/udev"
[ 38.842] (II) event0 - System mouse: is tagged by udev as:
Mouse
[ 38.843] (II) event0 - System mouse: device is a pointer
[ 38.844] (II) event0 - System mouse: device removed
[ 38.844] (**) Option "config_info" "udev:/dev/input/event0"
[ 38.844] (II) XINPUT: Adding extended input device "System
mouse" (type: MOUSE, id 6)
[ 38.844] (**) Option "AccelerationScheme" "none"
[ 38.844] (**) System mouse: (accel) selected scheme none/0
[ 38.844] (**) System mouse: (accel) acceleration factor: 2.000
[ 38.844] (**) System mouse: (accel) acceleration threshold: 4
[ 38.845] (II) event0 - System mouse: is tagged by udev as:
Mouse
[ 38.846] (II) event0 - System mouse: device is a pointer
[ 38.846] (II) config/udev: Adding input device System keyboard
multiplexer (/dev/input/event1)
[ 38.846] (**) System keyboard multiplexer: Applying InputClass
"evdev keyboard catchall"
[ 38.846] (**) System keyboard multiplexer: Applying InputClass
"Evdev keyboard"
[ 38.846] (**) System keyboard multiplexer: Applying InputClass
"libinput keyboard catchall"
[ 38.846] (**) System keyboard multiplexer: Applying InputClass
"keyboard"
[ 38.846] (II) Using input driver 'libinput' for 'System
keyboard multiplexer'
[ 38.846] (**) System keyboard multiplexer: always reports core
events
[ 38.846] (**) Option "Device" "/dev/input/event1"
[ 38.846] (**) Option "_source" "server/udev"
[ 38.847] (II) event1 - System keyboard multiplexer: is tagged
by udev as: Keyboard
[ 38.848] (II) event1 - System keyboard multiplexer: device is
a keyboard
[ 38.849] (II) event1 - System keyboard multiplexer: device
removed
[ 38.849] (**) Option "config_info" "udev:/dev/input/event1"
[ 38.849] (II) XINPUT: Adding extended input device "System
keyboard multiplexer" (type: KEYBOARD, id 7)
[ 38.849] (**) Option "xkb_rules" "evdev"
[ 38.849] (**) Option "xkb_layout" "de,us,fr"
[ 38.849] (WW) Option "xkb_variant" requires a string value
[ 38.875] (II) event1 - System keyboard multiplexer: is tagged
by udev as: Keyboard
[ 38.875] (II) event1 - System keyboard multiplexer: device is
a keyboard
[ 38.942] (II) config/udev: Adding input device Wacom Intuos PT
S 2 Pen (/dev/input/event11)
[ 38.942] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"evdev tablet catchall"
[ 38.942] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"libinput tablet catchall"
[ 38.943] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"Wacom USB tablet class"
[ 38.943] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"Wacom tablet class"
[ 38.943] (II) LoadModule: "wacom"
[ 38.943] (II) Loading
/usr/local/lib/xorg/modules/input/wacom_drv.so
[ 38.948] (II) Module wacom: vendor="X.Org Foundation"
[ 38.948] compiled for 1.21.1.4, module version = 0.39.0
[ 38.948] Module class: X.Org XInput Driver
[ 38.948] ABI class: X.Org XInput driver, version 24.4
[ 38.948] (II) Build version: 0.39.0
[ 38.948] (II) wacom: Driver for Wacom graphics tablets:
PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3
6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun
6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461,
CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1,
CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos
12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550,
PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521,
DTU1931,
DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452,
DTH2452,
Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12,
Intuos2 12x18,
Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2
2x3,
PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8,
Intuos3 4x5,
Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
Intuos4 8x13,
Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5
touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S,
Intuos Pro M,
Intuos Pro L, Intuos Draw small, Intuos Art/Photo/Comic
small,
Intuos Draw medium, Intuos Art medium, Cintiq 21UX, Cintiq
20WSX,
Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD,
Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241,
DTH2242,
Cintiq 22HDT, Cintiq 27QHDT, Cintiq 27QHDT, Mobilestudio
Pro 13,
MobileStudio Pro 16, MobileStudio Pro 13, MobileStudio Pro
16,
Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24,
Cintiq Pro 32,
Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24,
Cintiq Pro 32,
Cintiq Pro 24, Mobilestudio Pro 13, MobileStudio Pro 16,
MobileStudio Pro 13, MobileStudio Pro 16, MobileStudio Pro
16,
MobileStudio Pro 16, TabletPC 0x90, TabletPC 0x93,
TabletPC 0x97,
TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC
0xE3,
TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC
0xED,
TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC
0x10D,
TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC
0x4004,
TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024,
usb:172f:0025,
usb:172f:0026, usb:172f:0027, usb:172f:0028,
usb:172f:0030,
usb:172f:0031, usb:172f:0032, usb:172f:0033,
usb:172f:0034,
usb:172f:0035, usb:172f:0036, usb:172f:0037,
usb:172f:0038,
usb:172f:0039, usb:172f:0051, usb:172f:0052,
usb:172f:0053,
usb:172f:0054, usb:172f:0055, usb:172f:0056,
usb:172f:0057,
usb:172f:0058, usb:172f:0500, usb:172f:0501,
usb:172f:0502,
usb:172f:0503, usb:1b96:0001, usb:17ef:6004
[ 38.952] (II) Using input driver 'wacom' for 'Wacom Intuos PT
S 2 Pen'
[ 38.952] (**) Wacom Intuos PT S 2 Pen: always reports core
events
[ 38.952] (**) Option "Device" "/dev/input/event11"
[ 39.007] (II) Wacom Intuos PT S 2 Pen: type not specified,
assuming 'stylus'.
[ 39.007] (II) Wacom Intuos PT S 2 Pen: other types will be
automatically added.
[ 39.008] (--) Wacom Intuos PT S 2 Pen stylus: using pressure
threshold of 851 for button 1
[ 39.008] (**) Wacom Intuos PT S 2 Pen stylus: panscroll is 0
[ 39.008] (**) Wacom Intuos PT S 2 Pen stylus: panscroll
modified to 1300
[ 39.008] (--) Wacom Intuos PT S 2 Pen stylus: maxX=15200
maxY=9500 maxZ=2047 resX=100000 resY=100000 tilt=enabled
[ 39.008] (II) Wacom Intuos PT S 2 Pen stylus: hotplugging
dependent devices.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'eraser' for this device.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'cursor' for this device.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'touch' for this device.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'pad' for this device.
[ 39.009] (II) Wacom Intuos PT S 2 Pen stylus: hotplugging
completed.
[ 39.020] (**) Option "config_info" "udev:/dev/input/event11"
[ 39.020] (II) XINPUT: Adding extended input device "Wacom
Intuos PT S 2 Pen stylus" (type: STYLUS, id 8)
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel) keeping
acceleration scheme 1
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel)
acceleration profile 0
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel)
acceleration factor: 2.000
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel)
acceleration threshold: 4
[ 39.142] (II) config/udev: Adding input device Wacom Intuos PT
S 2 Finger (/dev/input/event12)
[ 39.142] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"evdev pointer catchall"
[ 39.142] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"evdev touchpad catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"libinput pointer catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"libinput touchpad catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"touchpad catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"Default clickpad buttons"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"Wacom USB touchpad class"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"Wacom touchpad class"
[ 39.143] (II) Using input driver 'wacom' for 'Wacom Intuos PT
S 2 Finger'
[ 39.143] (**) Wacom Intuos PT S 2 Finger: always reports core
events
[ 39.143] (**) Option "Device" "/dev/input/event12"
[ 39.198] (EE) Wacom Intuos PT S 2 Finger: Invalid type
'stylus' for this device.
[ 39.198] (EE) Wacom Intuos PT S 2 Finger: Invalid type
'eraser' for this device.
[ 39.198] (EE) Wacom Intuos PT S 2 Finger: Invalid type
'cursor' for this device.
[ 39.198] (II) Wacom Intuos PT S 2 Finger: type not specified,
assuming 'touch'.
[ 39.198] (II) Wacom Intuos PT S 2 Finger: other types will be
automatically added.
[ 39.200] (**) Wacom Intuos PT S 2 Finger touch: panscroll is 0
[ 39.200] (**) Wacom Intuos PT S 2 Finger touch: panscroll
modified to 2600
[ 39.200] (--) Wacom Intuos PT S 2 Finger touch: maxX=1520
maxY=950 maxZ=0 resX=10000 resY=10000
[ 39.200] (II) Wacom Intuos PT S 2 Finger touch: hotplugging
dependent devices.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'stylus' for this device.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'eraser' for this device.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'cursor' for this device.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'pad' for this device.
[ 39.200] (II) Wacom Intuos PT S 2 Finger touch: hotplugging
completed.
[ 39.211] (**) Option "config_info" "udev:/dev/input/event12"
[ 39.211] (II) XINPUT: Adding extended input device "Wacom
Intuos PT S 2 Finger touch" (type: TOUCH, id 9)
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)
keeping acceleration scheme 1
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)
acceleration profile 0
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)
acceleration factor: 2.000
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)
acceleration threshold: 4
[ 39.269] (II) config/udev: Adding input device Wacom Intuos PT
S 2 Pad (/dev/input/event13)
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"evdev tablet catchall"
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"libinput tablet catchall"
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"Wacom USB tablet class"
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"Wacom tablet class"
[ 39.269] (II) Using input driver 'wacom' for 'Wacom Intuos PT
S 2 Pad'
[ 39.269] (**) Wacom Intuos PT S 2 Pad: always reports core
events
[ 39.269] (**) Option "Device" "/dev/input/event13"
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'stylus'
for this device.
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'eraser'
for this device.
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'cursor'
for this device.
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'touch'
for this device.
[ 39.270] (II) Wacom Intuos PT S 2 Pad: type not specified,
assuming 'pad'.
[ 39.270] (II) Wacom Intuos PT S 2 Pad: other types will be
automatically added.
[ 39.271] (**) Wacom Intuos PT S 2 Pad pad: panscroll is 0
[ 39.271] (**) Wacom Intuos PT S 2 Pad pad: panscroll modified
to 2600
[ 39.271] (II) Wacom Intuos PT S 2 Pad pad: hotplugging
dependent devices.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'stylus' for this device.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'eraser' for this device.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'cursor' for this device.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'touch' for this device.
[ 39.271] (II) Wacom Intuos PT S 2 Pad pad: hotplugging
completed.
[ 39.271] (**) Option "config_info" "udev:/dev/input/event13"
[ 39.272] (II) XINPUT: Adding extended input device "Wacom
Intuos PT S 2 Pad pad" (type: PAD, id 10)
[ 39.272] (**) Wacom Intuos PT S 2 Pad pad: (accel) keeping
acceleration scheme 1
[ 39.273] (**) Wacom Intuos PT S 2 Pad pad: (accel)
acceleration profile 0
[ 39.273] (**) Wacom Intuos PT S 2 Pad pad: (accel)
acceleration factor: 2.000
[ 39.273] (**) Wacom Intuos PT S 2 Pad pad: (accel)
acceleration threshold: 4
[ 39.273] (II) config/udev: Adding input device La-VIEW
Technology SteelSeries (/dev/input/event14)
[ 39.273] (**) La-VIEW Technology SteelSeries: Applying
InputClass "evdev pointer catchall"
[ 39.273] (**) La-VIEW Technology SteelSeries: Applying
InputClass "libinput pointer catchall"
[ 39.273] (II) Using input driver 'libinput' for 'La-VIEW
Technology SteelSeries'
[ 39.273] (**) La-VIEW Technology SteelSeries: always reports
core events
[ 39.273] (**) Option "Device" "/dev/input/event14"
[ 39.273] (**) Option "_source" "server/udev"
[ 39.276] (II) event14 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Mouse
[ 39.277] (II) event14 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: device is a pointer
[ 39.278] (II) event14 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: device removed
[ 39.278] (**) Option "config_info" "udev:/dev/input/event14"
[ 39.278] (II) XINPUT: Adding extended input device "La-VIEW
Technology SteelSeries" (type: MOUSE, id 11)
[ 39.278] (**) Option "AccelerationScheme" "none"
[ 39.278] (**) La-VIEW Technology SteelSeries: (accel) selected
scheme none/0
[ 39.278] (**) La-VIEW Technology SteelSeries: (accel)
acceleration factor: 2.000
[ 39.278] (**) La-VIEW Technology SteelSeries: (accel)
acceleration threshold: 4
[ 39.279] (II) event14 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Mouse
[ 39.280] (II) event14 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: device is a pointer
[ 39.346] (II) config/udev: Adding input device Wacom Pen and
multitouch sensor Finger (/dev/input/event15)
[ 39.346] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "evdev touchscreen catchall"
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "libinput touchscreen catchall"
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "Wacom USB touchscreen class"
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "Wacom touchscreen class"
[ 39.347] (II) Using input driver 'wacom' for 'Wacom Pen and
multitouch sensor Finger'
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: always
reports core events
[ 39.347] (**) Option "Device" "/dev/input/event15"
[ 39.402] (EE) Wacom Pen and multitouch sensor Finger: Invalid
type 'stylus' for this device.
[ 39.402] (EE) Wacom Pen and multitouch sensor Finger: Invalid
type 'eraser' for this device.
[ 39.402] (EE) Wacom Pen and multitouch sensor Finger: Invalid
type 'cursor' for this device.
[ 39.402] (II) Wacom Pen and multitouch sensor Finger: type not
specified, assuming 'touch'.
[ 39.402] (II) Wacom Pen and multitouch sensor Finger: other
types will be automatically added.
[ 39.403] (**) Wacom Pen and multitouch sensor Finger touch:
panscroll is 0
[ 39.404] (**) Wacom Pen and multitouch sensor Finger touch:
panscroll modified to 13
[ 39.404] (--) Wacom Pen and multitouch sensor Finger touch:
maxX=12372 maxY=6960 maxZ=0 resX=40000 resY=40000
[ 39.404] (II) Wacom Pen and multitouch sensor Finger touch:
hotplugging dependent devices.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'stylus' for this device.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'eraser' for this device.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'cursor' for this device.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'pad' for this device.
[ 39.404] (II) Wacom Pen and multitouch sensor Finger touch:
hotplugging completed.
[ 39.415] (**) Option "config_info" "udev:/dev/input/event15"
[ 39.415] (II) XINPUT: Adding extended input device "Wacom Pen
and multitouch sensor Finger touch" (type: TOUCH, id 12)
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) keeping acceleration scheme 1
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) acceleration profile 0
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) acceleration factor: 2.000
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) acceleration threshold: 4
[ 39.538] (II) config/udev: Adding input device Wacom Pen and
multitouch sensor Pen (/dev/input/event16)
[ 39.538] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "evdev tablet catchall"
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "libinput tablet catchall"
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "Wacom USB tablet class"
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "Wacom tablet class"
[ 39.539] (II) Using input driver 'wacom' for 'Wacom Pen and
multitouch sensor Pen'
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: always
reports core events
[ 39.539] (**) Option "Device" "/dev/input/event16"
[ 39.594] (II) Wacom Pen and multitouch sensor Pen: type not
specified, assuming 'stylus'.
[ 39.594] (II) Wacom Pen and multitouch sensor Pen: other types
will be automatically added.
[ 39.595] (--) Wacom Pen and multitouch sensor Pen stylus:
using pressure threshold of 851 for button 1
[ 39.595] (**) Wacom Pen and multitouch sensor Pen stylus:
panscroll is 0
[ 39.595] (**) Wacom Pen and multitouch sensor Pen stylus:
panscroll modified to 1300
[ 39.595] (--) Wacom Pen and multitouch sensor Pen stylus:
maxX=30935 maxY=17401 maxZ=4095 resX=100000 resY=100000
tilt=enabled
[ 39.595] (II) Wacom Pen and multitouch sensor Pen stylus:
hotplugging dependent devices.
[ 39.595] (EE) Wacom Pen and multitouch sensor Pen stylus:
Invalid type 'cursor' for this device.
[ 39.595] (EE) Wacom Pen and multitouch sensor Pen stylus:
Invalid type 'touch' for this device.
[ 39.595] (EE) Wacom Pen and multitouch sensor Pen stylus:
Invalid type 'pad' for this device.
[ 39.595] (II) Wacom Pen and multitouch sensor Pen stylus:
hotplugging completed.
[ 39.606] (**) Option "config_info" "udev:/dev/input/event16"
[ 39.607] (II) XINPUT: Adding extended input device "Wacom Pen
and multitouch sensor Pen stylus" (type: STYLUS, id 13)
[ 39.607] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) keeping acceleration scheme 1
[ 39.607] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) acceleration profile 0
[ 39.608] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) acceleration factor: 2.000
[ 39.608] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) acceleration threshold: 4
[ 39.662] (II) config/udev: Adding input device ACPI video
extension (/dev/input/event2)
[ 39.662] (**) ACPI video extension: Applying InputClass "evdev
keyboard catchall"
[ 39.663] (**) ACPI video extension: Applying InputClass "Evdev
keyboard"
[ 39.663] (**) ACPI video extension: Applying InputClass
"libinput keyboard catchall"
[ 39.663] (**) ACPI video extension: Applying InputClass
"keyboard"
[ 39.663] (II) Using input driver 'libinput' for 'ACPI video
extension'
[ 39.663] (**) ACPI video extension: always reports core events
[ 39.663] (**) Option "Device" "/dev/input/event2"
[ 39.663] (**) Option "_source" "server/udev"
[ 39.667] (II) event2 - ACPI video extension: is tagged by
udev as: Keyboard
[ 39.667] (II) event2 - ACPI video extension: device is a
keyboard
[ 39.668] (II) event2 - ACPI video extension: device removed
[ 39.668] (**) Option "config_info" "udev:/dev/input/event2"
[ 39.668] (II) XINPUT: Adding extended input device "ACPI video
extension" (type: KEYBOARD, id 14)
[ 39.668] (**) Option "xkb_rules" "evdev"
[ 39.668] (**) Option "xkb_layout" "de,us,fr"
[ 39.668] (WW) Option "xkb_variant" requires a string value
[ 39.669] (II) event2 - ACPI video extension: is tagged by
udev as: Keyboard
[ 39.669] (II) event2 - ACPI video extension: device is a
keyboard
[ 39.670] (II) config/udev: Adding input device Sleep Button
(/dev/input/event3)
[ 39.670] (**) Sleep Button: Applying InputClass "evdev
keyboard catchall"
[ 39.670] (**) Sleep Button: Applying InputClass "Evdev
keyboard"
[ 39.670] (**) Sleep Button: Applying InputClass "libinput
keyboard catchall"
[ 39.670] (**) Sleep Button: Applying InputClass "keyboard"
[ 39.670] (II) Using input driver 'libinput' for 'Sleep Button'
[ 39.670] (**) Sleep Button: always reports core events
[ 39.670] (**) Option "Device" "/dev/input/event3"
[ 39.670] (**) Option "_source" "server/udev"
[ 39.671] (II) event3 - Sleep Button: is tagged by udev as:
Keyboard
[ 39.671] (II) event3 - Sleep Button: device is a keyboard
[ 39.672] (II) event3 - Sleep Button: device removed
[ 39.672] (**) Option "config_info" "udev:/dev/input/event3"
[ 39.672] (II) XINPUT: Adding extended input device "Sleep
Button" (type: KEYBOARD, id 15)
[ 39.672] (**) Option "xkb_rules" "evdev"
[ 39.672] (**) Option "xkb_layout" "de,us,fr"
[ 39.672] (WW) Option "xkb_variant" requires a string value
[ 39.673] (II) event3 - Sleep Button: is tagged by udev as:
Keyboard
[ 39.673] (II) event3 - Sleep Button: device is a keyboard
[ 39.674] (II) config/udev: Adding input device Control Method
Lid Switch (/dev/input/event4)
[ 39.674] (II) No input driver specified, ignoring this device.
[ 39.674] (II) This device may have been added with another
device file.
[ 39.674] (II) config/udev: Adding input device AT keyboard
(/dev/input/event5)
[ 39.674] (**) AT keyboard: Applying InputClass "evdev keyboard
catchall"
[ 39.674] (**) AT keyboard: Applying InputClass "Evdev
keyboard"
[ 39.674] (**) AT keyboard: Applying InputClass "libinput
keyboard catchall"
[ 39.674] (**) AT keyboard: Applying InputClass "keyboard"
[ 39.674] (II) Using input driver 'libinput' for 'AT keyboard'
[ 39.674] (**) AT keyboard: always reports core events
[ 39.674] (**) Option "Device" "/dev/input/event5"
[ 39.674] (**) Option "_source" "server/udev"
[ 39.675] (II) event5 - AT keyboard: is tagged by udev as:
Keyboard
[ 39.675] (II) event5 - AT keyboard: device is a keyboard
[ 39.677] (II) event5 - AT keyboard: device removed
[ 39.677] (**) Option "config_info" "udev:/dev/input/event5"
[ 39.678] (II) XINPUT: Adding extended input device "AT
keyboard" (type: KEYBOARD, id 16)
[ 39.678] (**) Option "xkb_rules" "evdev"
[ 39.678] (**) Option "xkb_layout" "de,us,fr"
[ 39.678] (WW) Option "xkb_variant" requires a string value
[ 39.679] (II) event5 - AT keyboard: is tagged by udev as:
Keyboard
[ 39.679] (II) event5 - AT keyboard: device is a keyboard
[ 39.681] (II) config/udev: Adding input device SynPS/2
Synaptics TouchPad (/dev/input/event6)
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"evdev pointer catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"evdev touchpad catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"libinput pointer catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"libinput touchpad catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"touchpad catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"Default clickpad buttons"
[ 39.681] (II) LoadModule: "synaptics"
[ 39.681] (II) Loading
/usr/local/lib/xorg/modules/input/synaptics_drv.so
[ 39.685] (II) Module synaptics: vendor="X.Org Foundation"
[ 39.685] compiled for 1.21.1.4, module version = 1.9.1
[ 39.685] Module class: X.Org XInput Driver
[ 39.685] ABI class: X.Org XInput driver, version 24.4
[ 39.685] (II) Using input driver 'synaptics' for 'SynPS/2
Synaptics TouchPad'
[ 39.685] (**) SynPS/2 Synaptics TouchPad: always reports core
events
[ 39.685] (**) Option "Device" "/dev/input/event6"
[ 39.818] (II) synaptics: SynPS/2 Synaptics TouchPad: found
clickpad property
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis
range 1264 - 5678 (res 46)
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis
range 1132 - 4720 (res 60)
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure
range 0 - 255
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: finger
width range 0 - 15
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons:
left double triple
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor
0x2 Product 0x7
[ 39.818] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad
found
[ 39.818] (**) SynPS/2 Synaptics TouchPad: always reports core
events
[ 39.853] (**) Option "config_info" "udev:/dev/input/event6"
[ 39.853] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 39.853] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MinSpeed is now constant deceleration 2.5
[ 39.853] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MaxSpeed is now 1.75
[ 39.853] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
AccelFactor is now 0.035
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) keeping
acceleration scheme 1
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
profile 1
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
factor: 2.000
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
threshold: 4
[ 39.901] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad
found
[ 39.902] (II) config/udev: Adding input device Generic PS/2
mouse (/dev/input/event7)
[ 39.902] (**) Generic PS/2 mouse: Applying InputClass "evdev
pointer catchall"
[ 39.902] (**) Generic PS/2 mouse: Applying InputClass
"libinput pointer catchall"
[ 39.902] (II) Using input driver 'libinput' for 'Generic PS/2
mouse'
[ 39.902] (**) Generic PS/2 mouse: always reports core events
[ 39.902] (**) Option "Device" "/dev/input/event7"
[ 39.902] (**) Option "_source" "server/udev"
[ 39.903] (II) event7 - Generic PS/2 mouse: is tagged by udev
as: Mouse
[ 39.903] (II) event7 - Generic PS/2 mouse: device is a
pointer
[ 39.904] (II) event7 - Generic PS/2 mouse: device removed
[ 39.904] (**) Option "config_info" "udev:/dev/input/event7"
[ 39.904] (II) XINPUT: Adding extended input device "Generic
PS/2 mouse" (type: MOUSE, id 18)
[ 39.904] (**) Option "AccelerationScheme" "none"
[ 39.904] (**) Generic PS/2 mouse: (accel) selected scheme
none/0
[ 39.904] (**) Generic PS/2 mouse: (accel) acceleration factor:
2.000
[ 39.904] (**) Generic PS/2 mouse: (accel) acceleration
threshold: 4
[ 39.905] (II) event7 - Generic PS/2 mouse: is tagged by udev
as: Mouse
[ 39.906] (II) event7 - Generic PS/2 mouse: device is a
pointer
[ 39.907] (II) config/udev: Adding input device CM Storm
Quickfire TKL 6keys (/dev/input/event8)
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "evdev keyboard catchall"
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "Evdev keyboard"
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "libinput keyboard catchall"
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "keyboard"
[ 39.907] (II) Using input driver 'libinput' for 'CM Storm
Quickfire TKL 6keys'
[ 39.907] (**) CM Storm Quickfire TKL 6keys: always reports
core events
[ 39.907] (**) Option "Device" "/dev/input/event8"
[ 39.907] (**) Option "_source" "server/udev"
[ 39.908] (II) event8 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 6: is tagged by udev as: Keyboard
[ 39.908] (II) event8 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 6: device is a keyboard
[ 39.909] (II) event8 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 6: device removed
[ 39.909] (**) Option "config_info" "udev:/dev/input/event8"
[ 39.909] (II) XINPUT: Adding extended input device "CM Storm
Quickfire TKL 6keys" (type: KEYBOARD, id 19)
[ 39.909] (**) Option "xkb_rules" "evdev"
[ 39.909] (**) Option "xkb_layout" "de,us,fr"
[ 39.909] (WW) Option "xkb_variant" requires a string value
[ 39.910] (II) event8 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 6: is tagged by udev as: Keyboard
[ 39.911] (II) event8 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 6: device is a keyboard
[ 39.912] (II) config/udev: Adding input device La-VIEW
Technology SteelSeries (/dev/input/event9)
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying
InputClass "evdev keyboard catchall"
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying
InputClass "Evdev keyboard"
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying
InputClass "libinput keyboard catchall"
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying
InputClass "keyboard"
[ 39.912] (II) Using input driver 'libinput' for 'La-VIEW
Technology SteelSeries'
[ 39.912] (**) La-VIEW Technology SteelSeries: always reports
core events
[ 39.912] (**) Option "Device" "/dev/input/event9"
[ 39.912] (**) Option "_source" "server/udev"
[ 39.913] (II) event9 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Keyboard
[ 39.913] (II) event9 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: device is a keyboard
[ 39.914] (II) event9 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: device removed
[ 39.914] (**) Option "config_info" "udev:/dev/input/event9"
[ 39.914] (II) XINPUT: Adding extended input device "La-VIEW
Technology SteelSeries" (type: KEYBOARD, id 20)
[ 39.914] (**) Option "xkb_rules" "evdev"
[ 39.914] (**) Option "xkb_layout" "de,us,fr"
[ 39.914] (WW) Option "xkb_variant" requires a string value
[ 39.915] (II) event9 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Keyboard
[ 39.916] (II) event9 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: device is a keyboard
[ 39.942] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "evdev tablet catchall"
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "libinput tablet catchall"
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "Wacom USB tablet class"
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "Wacom tablet class"
[ 39.943] (II) Using input driver 'wacom' for 'Wacom Pen and
multitouch sensor Pen eraser'
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:
always reports core events
[ 39.943] (**) Option "Device" "/dev/input/event16"
[ 39.943] (**) Option "Type" "eraser"
[ 39.944] (**) Wacom Pen and multitouch sensor Pen eraser:
panscroll is 1300
[ 39.944] (**) Wacom Pen and multitouch sensor Pen eraser:
panscroll modified to 1300
[ 39.944] (--) Wacom Pen and multitouch sensor Pen eraser:
maxX=30935 maxY=17401 maxZ=4095 resX=100000 resY=100000
tilt=enabled
[ 39.945] (**) Option "config_info" "udev:/dev/input/event16"
[ 39.945] (II) XINPUT: Adding extended input device "Wacom Pen
and multitouch sensor Pen eraser" (type: ERASER, id 21)
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) keeping acceleration scheme 1
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) acceleration profile 0
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) acceleration factor: 2.000
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) acceleration threshold: 4
[ 40.569] (II) intel(0): EDID vendor "AUO", prod id 8246
[ 40.569] (II) intel(0): Printing DDC gathered Modelines:
[ 40.569] (II) intel(0): Modeline "2560x1440"x0.0 245.50 2560
2608 2640 2720 1440 1443 1448 1504 -hsync -vsync (90.3 kHz eP)
[ 40.923] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.303] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.306] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.306] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.306] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.307] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.308] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.308] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.309] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.310] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.310] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.311] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.311] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.311] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.313] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.313] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.313] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.315] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.315] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.315] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.332] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.334] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.568] (II) intel(0): resizing framebuffer to 5568x3132
[ 45.615] (II) intel(0): switch to mode 3840x2160@30.0 on
HDMI-1 using pipe 1, position (0, 0), rotation normal, reflection
none
[ 45.712] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.719] (II) intel(0): resizing framebuffer to 8128x3132
[ 45.799] (II) intel(0): switch to mode 3840x2160@30.0 on
HDMI-1 using pipe 1, position (2560, 0), rotation normal,
reflection none
[ 45.887] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.934] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 46.388] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 46.389] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 1004.147] (II) event14 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 7: SYN_DROPPED event - some input events
have been lost.
--
Mathias Picker
Geschäftsführer
Mathias.Picker@virtual-earth.de
virtual earth Gesellschaft für Wissens re/prä sentation mbH
http://www.virtual-earth.de/ HRB126870
support@virtual-earth.de Westendstr. 142
089 / 1250 3943