Re: SUccess with Intel AX200NGW M.2 chip.
- In reply to: Lars Tunkrans : "SUccess with Intel AX200NGW M.2 chip."
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 23 May 2026 15:44:26 UTC
On Sat, 23 May 2026, Lars Tunkrans wrote: Hi, I'll just reply to all. > I aqquiered an Intel AX200NGW M.2 2230 chip for my new Desktop > computer . For everyone else: AX200 is EOL from Intel's side. While it's likely a good chipset for a few more years, support in case of trouble will be harder as they are unlikely going to update firmware etc. anymore unless there are security issues (that's my judgement based on what we saw in the past with iwm-like hardware). > The AP used here is somewhat dated, no longer in production, > Ruckus-Wireless-310. > But i keep it as its Powered over Ethernet. I recently got a PoE one two. I cannot wait until they put the SFP+ at least next to it (some do exist but not at a reasonable price or no PoE) so you can get more than 2.5G out of the AP. > Running : > > FreeBSD 15.1-STABLE stable/15-n283657-9d28d4daff8d > This is the ifconfig output. > > > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=0 > ether 00:72:ee:44:86:62 > inet 192.168.2.226 netmask 0xffffff00 broadcast 192.168.2.255 > groups: wlan > ssid Ruckus-Wireless-310 channel 108 (5540 MHz 11a) bssid > b4:79:c8:38:11:dc > regdomain ETSI country SE authmode WPA2/802.11i privacy ON > deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 23 > bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 wme roaming MANUAL > parent interface: iwlwifi0 > media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11a > status: associated > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Is the AP 11a only or how did you install firmware? I am just asking as it's neither 11na ot 11ac. If 11a is expected because of the AP then all good. And thanks a lot for reporting and glad to hear it works :) Blessed weekend, /bz -- Bjoern A. Zeeb r15:7