[Bug 275344] RTL8192EU usb wifi, hostapd error

From: <bugzilla-noreply_at_freebsd.org>
Date: Tue, 19 May 2026 12:08:52 UTC 
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=275344

--- Comment #13 from Henri Hennebert <hlh@restart.be> ---
(In reply to Mark Linimon from comment #12)
I test hostapd on
FreeBSD keystone.lab.bel 15.1-PRERELEASE FreeBSD 15.1-PRERELEASE #0
stable/15-n283068-901aec0a855b: Wed Apr 22 20:43:49 CEST 2026    
root@keystone.lab.bel:/usr/obj/usr/src/arm64.aarch64/sys/ROCKPRO64 arm64

and it work fine.

BUT - if I stop hostapd (service hostapd stop) I get:

rtwn0: rtwn_tx_beacon_check: cannot push beacon into chip, error 60!
rtwn0: unable to push beacon into the chip, error 60
rtwn0: rtwn_newstate: could not move to RUN state
rtwn0: rtwn_bulk_tx_callback_qid: called; txeof qid=4, error=USB_ERR_TIMEOUT
rtwn0: rtwn_bulk_tx_callback_qid: called; txeof qid=4, error=USB_ERR_TIMEOUT
rtwn0: rtwn_bulk_tx_callback_qid: called; txeof qid=4, error=USB_ERR_TIMEOUT
ugen0.2: <Realtek 802.11n NIC> at usbus0 (disconnected)
rtwn0: at uhub0, port 1, addr 2 (disconnected)
rtwn0: detached
ugen0.2: <Realtek 802.11n NIC> at usbus0
rtwn0 on uhub0
rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.10/2.00, addr 2> on usbus0
rtwn0: MAC/BB RTL8192EU, RF 6052 2T2R
wlan0: Ethernet address: 50:3e:aa:7a:f5:19
rtwn0: rtwn_tx_beacon_check: cannot push beacon into chip, error 60!
rtwn0: unable to push beacon into the chip, error 60
rtwn0: rtwn_newstate: could not move to RUN state
rtwn0: rtwn_bulk_tx_callback_qid: called; txeof qid=4, error=USB_ERR_TIMEOUT
rtwn0: rtwn_bulk_tx_callback_qid: called; txeof qid=4, error=USB_ERR_TIMEOUT

I must unplug  and replug the Realtek to restore a normal functioning.

-- 
You are receiving this mail because:
You are the assignee for the bug.