Re: Go ports are crashing wireless (AX201)

Hello Bjoern,

This is a variant of PR 279717.   I need to follow-up there with more
> information.
>
> Are you running at VHT160, VHT80, ..?
>
> You could try to limit the channel width to something narrower (espcially
> if you are doing VHT160 or HT40) and see if that helps.


I was running at VHT80 and one single `make distclean fecth` in a go port
will crash wifi.

I'm using `create_args_wlan0="country PT regdomain ETSI mode 11na -vht
-ht160"`
and I did 6 runs on a go port without crash.

Any thoughts or should I try anything else?

Thanks

wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=0
ether 6c:6a:77:df:09:21
inet 192.168.1.188 netmask 0xffffff00 broadcast 192.168.1.255
groups: wlan
ssid OpenWrt-5 channel 40 (5200 MHz 11a ht/40-) bssid 82:af:ca:7f:eb:5f
regdomain FCC country US authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 3:128-bit AES-CCM ucast:128-bit txpower 17
bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k
ampdudensity 2 -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd wme
roaming MANUAL
parent interface: iwlwifi0
media: IEEE 802.11 Wireless Ethernet MCS mode 11na
status: associated
nd6 options=829<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL,STABLEADDR>


-- 
Nuno Teixeira
FreeBSD UNIX:  <eduardo@FreeBSD.org>   Web:  https://FreeBSD.org