Re: iwlwifi / rtw88 / rtw89 hw crypto request for test (precon for HT/VHT)
- In reply to: Tilman_Keskinöz : "Re: iwlwifi / rtw88 / rtw89 hw crypto request for test (precon for HT/VHT)"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Tue, 04 Mar 2025 22:44:34 UTC
On Tue, 4 Mar 2025, Tilman Keskinöz wrote: > Hi, sorry for being late to the party. > > On 2/27/25 23:54, Bjoern A. Zeeb wrote: >> (4) rtw89 (my own testing): >> ---------------------------------------- >> >> * vendor=0x10ec device=0xc822 subvendor=0x1a3b subdevice=0x3750 >> [8852AE, rtw89/rtw8852a_fw.bin 0.13.36.0 (c33d3f88)] >> Problems, 'FW crash' >> > > rtw890@pci0:3:0:0: class=0x028000 rev=0x00 hdr=0x00 vendor=0x10ec > device=0x8852 subvendor=0x17aa subdevice=0x4852 > vendor = 'Realtek Semiconductor Co., Ltd.' > device = 'RTL8852AE 802.11ax PCIe Wireless Network Adapter' > class = network > > > The device associates but quite soon disassociates. > > wlanstats output: > > wlanstats: wlan0:00:00:00:00:00:00 (IEEE80211_IOC_STA_INFO): No such file or > directory > wlanstats: wlan0:00:00:00:00:00:00 (IEEE80211_IOC_STA_STATS): No such file or > directory > 21 rx discard 'cuz dup > 189 rx w/ wrong direction > 257 rx discard mgt frames > 2705 rx ctrl frames > 401 rx beacon frames > 453 rx element unknown > 7 rx frame chan mismatch > 320 rx w/ incorrect keyid > 2 tx failed 'cuz no defkey > 71 active scans started > 1270 ccmp crypto done in s/w > 680 rx management frames > 1 A-MPDU BAR rx before ADDBA exchange (or disabled with > net.link.ieee80211) > 2 tx failed 'cuz vap not in RUN state > 0.0M current transmit rate > 0.0 current rssi > 0.0 current signal (dBm) Which tunables did you set in this case? > dmesg: > ieee80211_node_get_txrate_dot11rate: called for VHT / unknown rate (type 0)! > wlan0: link state changed to UP > wlan0: link state changed to DOWN > ieee80211_node_get_txrate_dot11rate: called for VHT / unknown rate (type 0)! This was fixed earlier today but is just noise. -- Bjoern A. Zeeb r15:7