Re: rtwn/rtl8821au: strange issue with 5GHz channels

From: Bjoern A. Zeeb <bz_at_FreeBSD.org>
Date: Tue, 19 Aug 2025 23:39:49 UTC
On Tue, 19 Aug 2025, Andriy Gapon wrote:

> On 19/08/2025 18:33, Andriy Gapon wrote:
>> Weird thing... I set the AP to 20MHz:
>> # iw dev phy1-ap1 info
>> Interface phy1-ap1
>>          ifindex 28
>>          wdev 0x10000000b
>>          addr 7a:d2:94:80:1f:ec
>>          ssid HolyLan
>>          type AP
>>          wiphy 1
>>          channel 149 (5745 MHz), width: 20 MHz, center1: 5745 MHz
>>          txpower 20.00 dBm
>>          multicast TXQ:
>>                  qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol 
>> tx- bytes        tx-packets
>>                  0       0       67      0       0       0       0       
>> 20434          67
>> 
>> Then I reset the client and tried again and it still wants to use channel 
>> 153:
>> 
>> wpa_supplicant[16180]: wlan0: Trying to associate with 7a:d2:94:80:1f:ec 
>> (SSID='HolyLan' freq=5765 MHz)
>> wpa_supplicant[16180]: wlan0: Authentication with 7a:d2:94:80:1f:ec timed 
>> out.
>> wpa_supplicant[16180]: wlan0: Added BSSID 7a:d2:94:80:1f:ec into ignore 
>> list, ignoring for 10 seconds
>> wpa_supplicant[16180]: wlan0: CTRL-EVENT-DISCONNECTED 
>> bssid=7a:d2:94:80:1f:ec reason=3 locally_generated=
>
> After a couple of dozens of retries the correct channel / frequency was 
> finally selected and connection was successfully established.

That's something for Adrian having worked on that driver.


> But it looks like the connection is 'a', not 'ac' that I expected?

Yes given you showed in the list channels yourself that there was no VHT
given regdomain.xml for NONE/UA does not know about that.

UA is close but not exactly matching the current ETSI regdomain
definition (careful, you are not allowed as many mW in some case, etc.) from
what I can see in what linux wireless-regd has.


> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        options=200001<RXCSUM,RXCSUM_IPV6>
>        ether 08:be:ac:3e:a9:ee
>        inet 192.168.0.130 netmask 0xffffffff broadcast 192.168.0.130
>        groups: wlan
>        ssid HolyLan channel 149 (5745 MHz 11a) bssid 7a:d2:94:80:1f:ec
>        regdomain NONE country UA indoor authmode WPA2/802.11i privacy ON
>        deftxkey UNDEF AES-CCM 2:128-bit txpower 23 bmiss 7 mcastrate 6
>        mgmtrate 6 scanvalid 60 wme roaming MANUAL
>        parent interface: rtwn0
>        media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11a
>        status: associated
>        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>
> Log:
> wpa_supplicant[2564]: wlan0: Trying to associate with 7a:d2:94:80:1f:ec 
> (SSID='HolyLan' freq=5745 MHz)
> wpa_supplicant[2564]: wlan0: Associated with 7a:d2:94:80:1f:ec
> wpa_supplicant[2564]: wlan0: WPA: Key negotiation completed with 
> 7a:d2:94:80:1f:ec [PTK=CCMP GTK=CCMP]
> wpa_supplicant[2564]: wlan0: CTRL-EVENT-CONNECTED - Connection to 
> 7a:d2:94:80:1f:ec completed [id=0 id_str=]
> kernel: wlan0: link state changed to UP
>
>
>

-- 
Bjoern A. Zeeb                                                     r15:7