Re: rtwn/rtl8821au: strange issue with 5GHz channels

From: Bjoern A. Zeeb <bz_at_FreeBSD.org>
Date: Tue, 19 Aug 2025 15:38:20 UTC
On Tue, 19 Aug 2025, Andriy Gapon wrote:

> On 19/08/2025 17:13, Adrian Chadd wrote:
>> 
>> It doesn't HAVE to be, but it certainly makes life easier.
>> 
>> See 
>> https://support.metageek.com/hc/en-us/articles/203532644-802-11ac-Channels 
>> <https://support.metageek.com/hc/en-us/articles/203532644-802-11ac-Channels> 
>> for information
>> about how the channels line up.  FreeBSD should be spitting out the primary 
>> channel, not the "centre"
>> channel.
>> 
>> At home I use channel 36/vht/40+, and I've tested it with 80MHz too. Eg:
>> 
>> CACHEBOY_HOME                     30:de:4b:db:46:0a   36   54M  -72:-95   
>> 100 EP    RSN HTCAP VHTCAP VHTOPMODE VHTPWRENV HECAP HEOPER 
>> MU_EDCA_PARAM_SET RSNXE WME WPS
>> 
>> Can you use iw on your openwrt router to capture what its current config 
>> is?
>> 
>> It's very possible there's some oddness around 80MHz and frame reliability. 
>> I've seen some issues with
>> the initial association not completing - we don't currently retry the 
>> initial frame exchange during association
>> (whereas Linux mac80211 does).
>> 
>> Can you try running your AP at 20MHz and 40MHz and see if it improves?
>
> Weird thing... I set the AP to 20MHz:
> # iw dev phy1-ap1 info
> Interface phy1-ap1
>        ifindex 28
>        wdev 0x10000000b
>        addr 7a:d2:94:80:1f:ec
>        ssid HolyLan
>        type AP
>        wiphy 1
>        channel 149 (5745 MHz), width: 20 MHz, center1: 5745 MHz
>        txpower 20.00 dBm
>        multicast TXQ:
>                qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol 
> tx-bytes        tx-packets
>                0       0       67      0       0       0       0       20434 
> 67
>
> Then I reset the client and tried again and it still wants to use channel 
> 153:
>
> wpa_supplicant[16180]: wlan0: Trying to associate with 7a:d2:94:80:1f:ec 
> (SSID='HolyLan' freq=5765 MHz)
> wpa_supplicant[16180]: wlan0: Authentication with 7a:d2:94:80:1f:ec timed 
> out.
> wpa_supplicant[16180]: wlan0: Added BSSID 7a:d2:94:80:1f:ec into ignore list, 
> ignoring for 10 seconds
> wpa_supplicant[16180]: wlan0: CTRL-EVENT-DISCONNECTED bssid=7a:d2:94:80:1f:ec 
> reason=3 locally_generated=
> wpa_supplicant[16180]: wlan0: BSSID 7a:d2:94:80:1f:ec ignore list count 
> incremented to 2, ignoring for 10
> wpa_supplicant[16180]: wlan0: CTRL-EVENT-DSCP-POLICY clear_all
> wpa_supplicant[16180]: wlan0: Removed BSSID 7a:d2:94:80:1f:ec from ignore 
> list (clear)
> wpa_supplicant[16180]: wlan0: Trying to associate with 7a:d2:94:80:1f:ec 
> (SSID='HolyLan' freq=5765 MHz)
> wpa_supplicant[16180]: wlan0: Authentication with 7a:d2:94:80:1f:ec timed 
> out.
> wpa_supplicant[16180]: wlan0: Added BSSID 7a:d2:94:80:1f:ec into ignore list, 
> ignoring for 10 seconds
> wpa_supplicant[16180]: wlan0: CTRL-EVENT-DISCONNECTED bssid=7a:d2:94:80:1f:ec 
> reason=3 locally_generated=
> wpa_supplicant[16180]: wlan0: BSSID 7a:d2:94:80:1f:ec ignore list count 
> incremented to 2, ignoring for 10
> wpa_supplicant[16180]: wlan0: CTRL-EVENT-DSCP-POLICY clear_all


What's your country set to on FreeBSD?  I am asking as UA is set to
"none" in regdomain.xml which means at best it'll do HT most likely?
I haven't checked the freqbands supported there.

What does ifconfig -v wlan0 show chan and ifconfig -v wlan0 show regdomain 
show?

Just a random guess.

/bz

-- 
Bjoern A. Zeeb                                                     r15:7