rtwn0: rtwn_rx_copy_to_mbuf: could not allocate RX mbuf
Date: Thu, 24 Apr 2025 11:04:40 UTC
Hello, At main-n276705-e3e55936ce3b: Wed Apr 23, rtwn driver became almost useless on my amd64 and aarch64. Tested with RTL8811AU and RTL8821AU usb dongles. Should I open a PR? Any tips to debug this? Thanks, `git pull --rebase` takes too long time to complete and sometimes fails. iperf3 shows bellow resilts on amd64/aarch64 with both cards. % iperf3 -c hp -R Connecting to host hp, port 5201 Reverse mode, remote host hp is sending [ 5] local 192.168.1.82 port 43550 connected to 192.168.1.100 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 1.00-2.06 sec 0.00 Bytes 0.00 bits/sec [ 5] 2.06-3.00 sec 128 KBytes 1.11 Mbits/sec [ 5] 3.00-4.03 sec 128 KBytes 1.02 Mbits/sec [ 5] 4.03-5.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 5.01-6.01 sec 256 KBytes 2.10 Mbits/sec [ 5] 6.01-7.06 sec 0.00 Bytes 0.00 bits/sec [ 5] 7.06-8.06 sec 0.00 Bytes 0.00 bits/sec [ 5] 8.06-9.01 sec 0.00 Bytes 0.00 bits/sec [ 5] 9.01-10.01 sec 128 KBytes 1.04 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 768 KBytes 628 Kbits/sec 156 sender [ 5] 0.00-10.01 sec 640 KBytes 524 Kbits/sec receiver iperf Done. -- Nuno Teixeira FreeBSD UNIX: <eduardo@FreeBSD.org> Web: https://FreeBSD.org