[Bug 283142] rtw88: does not connect to network [was: Error when connecting to WiFi | Invalid argument in wpa_supplicant]
Date: Tue, 10 Dec 2024 20:53:36 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=283142 --- Comment #13 from solidwarea@outlook.com --- (In reply to Bjoern A. Zeeb from comment #12) I tried running WPA supplicant using the argument you specified. It give a ton of information quite quickly but I’ve tried reading through it to look if there’s anything interesting to note: rtw880: Ikpi_sta_a_to_a: 1685: Ivif 0x[hex-code] vap 0x[hex-code] iv_bss 0x[hex-code] lvif_bss 0x[hex-code] Ivif_bss->ni 0x[hex-code]@[hex-code?] synched 8 rtw880: 1kpi_iv_newstate: error 95 during state transition 2 (AUTH) -> 2 (AUTH) I wasn’t sure if it was safe to write out the hex codes. If it is safe and it’s needed do let me know so that I could provide them. wlan0: MLD: No Multi-Link element wlan0: Selected BSS [mac address] ssid=[’MySSID’] Selecting BSS from priority group 0 0: [mac-address] ssid=’MySSID’ wpa_ie_len=20 caps=0x11 level=-43 freq=2452 wps Skip - BSSID ignored (count=2 limit=8) Pciconf -lv shows: rtw880@pci0:3:0:0: class=0x028000 rev=0x00 hdr=0x00 vendor=0x10ec device=0xc822 subvendor=0x103c subdevice=0x85f7 vendor = 'Realtek Semiconductor Co., Ltd. device = 'RTL8822CE 802.11ac PCIe Wireless Network Adapter' class = network The rtw88 boot message shows this: rtw880: <rtw_8822ce> port 0x3000-0x30ff mem 0x83200000-0x8320ffff at device 0.0 on pci5 rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin' rtw880: Firmware version 9.9.10, H2C version 15 -- You are receiving this mail because: You are the assignee for the bug.