[Bug 283142] rtw88: does not connect to network [was: Error when connecting to WiFi | Invalid argument in wpa_supplicant]

From: <bugzilla-noreply_at_freebsd.org>
Date: Sun, 08 Dec 2024 19:16:06 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=283142

--- Comment #7 from imbutler <imb@protected-networks.net> ---
(In reply to Bjoern A. Zeeb from comment #6)

"ifconfig -v wlan0 list scan" returns:

Redacted        00:11:22:33:44:55    6   54M  -34:-96   100 EP  SSID<Redacted>
RATES<B2,B4,B11,B22,12,18,24,36> DSPARMS<6> TIM<050400030000> COUNTRY<US 
1-11,30> ERP<0x4> XRATES<48,72,96,108> 
                                                                RSN<v1
mc:AES-CCMP uc:AES-CCMP km:8021X-PSK> RRM_ENCAPS<4605530a000000>
UNKNOWN_ELEMID_59<3b0251-> 
                                                                HTCAP<cap
0x18ef param 0x3 mcsset[0-32] extcap 0x0 txbf 0x19870419 antenna 0x0>
HTINFO<ctl 6, 8,4,0,0 basicmcs[]> 
                                                               
OVERLAP_BSS<4a0e14000a002c01c8-> EXTCAP<7f0a01000880000000c00140>
UNKNOWN_ELEMID_107<6b01-> UNKNOWN_ELEMID_108<6c02-> 
                                                                VHTCAP<cap
0x13ab7892 rx_mcs_map 0xffaa rx_highest 0 tx_mcs_map 0xffaa tx_highest 0>
VHTOPMODE<chw 0 freq0_idx 6 freq1_idx 0 basic_mcs_set 0xfffc> 
                                                               
UNKNOWN_ELEMID_255<ff23-> UNKNOWN_ELEMID_255<ff07-> UNKNOWN_ELEMID_255<ff0e->
UNKNOWN_ELEMID_255<ff02-> VEN<dd1a00904c0408bf0c9278ab13aaff0000-> 
                                                                WME<qosinfo
0x80 BE[aifsn 3 cwmin 4 cwmax 10 txop 0] BK[aifsn 7 cwmin 4 cwmax 10 txop 0]
VO[aifsn 2 cwmin 3 cwmax 4 txop 94] VI[aifsn 2 cwmin 2 cwmax 3 txop 47]> 
                                                               
VEN<dd050009860100>

The AP is sold by Verizon but I suspect it's a rebranded Arris or similar with
a model number of CR1000B (tri-band - 2, 5 and 6G). I should note that other
devices, e.g. Apple, Roku, iwlwifi and iwn, all connect without issue.

There's nothing in what little logging is available on the AP to suggest that
it saw the connection attempt :-( How can I confirm the transmitter is enabled?

From reading past notes, I have this in /boot/loader.conf:

compat.linuxkpi.skb.mem_limit=1

-- 
You are receiving this mail because:
You are the assignee for the bug.