Re: iwlwifi/LinuxKPI 802.11 update
- Reply: Simple : "Re: iwlwifi/LinuxKPI 802.11 update"
- Reply: Kevin Oberman : "Re: iwlwifi/LinuxKPI 802.11 update"
- Reply: Bjoern A. Zeeb: "Re: iwlwifi/LinuxKPI 802.11 update"
- In reply to: Krzysztof Piecuch : "Re: iwlwifi/LinuxKPI 802.11 update"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 26 Mar 2022 10:27:59 UTC
Hi Kzrysztof,
Thanks for your report.
Because I use 13 stable and cannot test the current,
your report is very useful to me.
I'm using ThinkPad X1 nano which has a AX201.
I have some questions.
Do we need the 'if_iwlwifi_load="YES"' line
in addition to the 'kld_list=if_iwlfiwi' line?
I don't think so, but I may be wrong.
Do you use "wifimgr" which is a GUI tool to select AP.
When I use "if_iwlfiwi.ko", wave strength displayed
in wifimgr is 0 for all access point.
Do you see this phenomenon? Or, does someone see this?
Best,
Takashi
On 3/26/22 09:14, Krzysztof Piecuch wrote:
> Hi Bjoern,
>
> I posted my previous experience on this group some time ago. This time
> it looks much better.
>
> For the reference, I tested this commit:
>
> commit 9d9ba2b79b3196935431879efd9094eb9bfedd95 (HEAD)
> Author: Bjoern A. Zeeb <bz@FreeBSD.org>
> Date: Thu Mar 24 19:09:04 2022 +0000
>
> with my Network controller: Intel Corporation Wi-Fi 6 AX201 (rev 20)
>
> For now I tested it only once, for about 10 minutes. I'll update you
> when longer testing reveals any issues with current version.
>
> good things:
> - no errors when powering off the machine
>
> - no errors when loading the module on boot through /etc/rc.conf
>
> - no errors when leaving the machine idle with no connections
>
> - overall, looks much more stable than previous releases. Worth the wait!
>
> bad things:
> - the wifi interface would go up -> down -> up on boot? Not sure if I'm
> reading dmesg correctly, please double-check it.
>
> - there are dips in wifi speed. I downloaded over 100MB data though pkg
> update (see attachment logs). My download speed would go to 2MBps,
> 2.1MBps, 2.2MBps, hit 2.4MBps, stay there for a while and then dip to
> <1MBps only to jump back to 1.8MBps or higher. 2.4MBps is the expected
> upper limit as my ISP can't go any faster.
>
> I'm sorry I don't have any better metrics on that, I just reported
> what I saw printed by `pkg`. I am reporting in MBps because that's
> what pkg reported. The signal strength was good, there's only 1 thin
> wall between my laptop and wifi hotspot.
>
> post-factum `netstat -i` doesn't look horrible IMO:
>
> --------8<-------------------------->8-----------------------------------------------
> Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs Coll
> lo0 16384 <Link#1> lo0 148 0 0 148 0 0
> lo0 - localhost localhost 0 - - 0 - -
> lo0 - fe80::%lo0/64 fe80::1%lo0 0 - - 0 - -
> lo0 - your-net localhost 148 - - 148 - -
> wifi 1500 <Link#2> dc:21:48:5d:d7:11 184805 0 0 94540 23 0
> wifi - 192.168.0.0/2 192.168.0.8 184728 - - 94537 - -
> --------8<-------------------------->8-----------------------------------------------
>
> Please see the attached /var/log/messages.
>
> relevant lines in /etc/rc.conf - I have not configured anything manually
> during machine's run.
>
>
> -----8<-------------8<-------------------
> kld_list="${kld_list} if_iwlwifi i915kms"
> if_iwlwifi_load="YES"
> wlans_iwlwifi0="wifi"
> create_args_wifi="wlandev iwlwifi0"
> ifconfig_wifi="WPA SYNCDHCP"
> -----8<-------------8<-------------------
>
> Best,
> Kris
>