Re: New iwlwifi firmware for testing in main

Yup, this scenario is the same as reported in my previous bug report from a few months ago:

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=263613

Sent from ProtonMail mobile

-------- Original Message --------
On Aug 2, 2022, 21:50, Bakul Shah wrote:

> Ok, I narrowed it down to a specific case. If I use ifconfig_wlan0="WPA DHCP" everything works. If I replace DHCP with a fixed address it panics as before. Apparently this happens as soon as the device associates with an AP. The stuff you asked for is below. > On Aug 2, 2022, at 1:00 PM, Bjoern A. Zeeb  wrote: > > On Sun, 31 Jul 2022, Bakul Shah wrote: > >> On Jul 30, 2022, at 5:51 PM, Bjoern A. Zeeb  wrote: >>> >>> Hi, >>> >>> I've updated the firmware for iwlwifi in main (HEAD/CURRENT) with >>> >>> https://cgit.FreeBSD.org/src/commit/?id=13a7663c521ac3541756aa1157dcfce9f0ce78e8 >>> >>> It has a ~3 week MFC timer so it can be tested. >>> >>> If you are running main with an AX2xx or 9xxx card please give it a >>> try. In case they don't work for you please let me know and (as >>> always) please have a way to revert in case WiFi is the only >>> connectivity on your device. >> >> I still get the same panic I was getting a few months back, >> when I run -current in a bhyve VM. Not a priority so this >> can wait. To see if this a bhyve problem I should try using >> wifi from a linux guest and see if it works.... > > What's the leadup to this? What's the wpa_supplicant log saying? Clearing /tmp (X related). Autoloading module: if_iwlwifi Intel(R) Wireless WiFi based driver for FreeBSD iwlwifi0:  mem 0xc1034000-0xc1037fff irq 20 at device 7.0 on pci0 iwlwifi0: successfully loaded firmware image 'iwlwifi-9260-th-b0-jf-b0-46.ucode' iwlwifi0: WRT: Overriding region id 0 iwlwifi0: WRT: Overriding region id 1 iwlwifi0: WRT: Overriding region id 2 iwlwifi0: WRT: Overriding region id 3 iwlwifi0: WRT: Overriding region id 4 iwlwifi0: WRT: Overriding region id 6 iwlwifi0: WRT: Overriding region id 8 iwlwifi0: WRT: Overriding region id 9 iwlwifi0: WRT: Overriding region id 10 iwlwifi0: WRT: Overriding region id 11 iwlwifi0: WRT: Overriding region id 15 iwlwifi0: WRT: Overriding region id 16 iwlwifi0: WRT: Overriding region id 18 iwlwifi0: WRT: Overriding region id 19 iwlwifi0: WRT: Overriding region id 20 iwlwifi0: WRT: Overriding region id 21 iwlwifi0: WRT: Overriding region id 28 iwlwifi0: loaded firmware version 46.9d0122c0.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x321 Starting sendmail_outbound. Performing sanity check on sshd configuration. iwlwifi0: base HW address: 8c:a9:82:fc:e8:9c, OTP minor version: 0x4 Starting sshd. Setting hostname: xxxxxxxxxxx Setting up harvesting: PURE_RDRAND,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . Creating and/or trimming log files. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.32/mach/CORE /usr/local/llvm12/lib /usr/local/llvm13/lib 32-bit compatibility ldconfig path: /usr/lib32 Updating /var/run/os-release done. Recovering vi editor sessions:. wlan0: Ethernet address: 8c:a9:82:fc:e8:9c net.wlan.0.debug: 0x0 => 0x11c91000 Created wlan(4) interfaces: wlan0. lo0: link state changed to UP uhub0: 8 ports with 8 removable, self powered ugen0.2:  at usbus0 wlan0: ieee80211_init wlan0: start running, 0 vaps running wlan0: ieee80211_start_locked: up parent iwlwifi0 Starting wpa_supplicant. wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0 wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0 wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0 wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0 wlan0: stop running, 1 vaps running wlan0: ieee80211_new_state_locked: INIT -> INIT (arg -1) (nrunning 0 nscanning 0) wlan0: down parent iwlwifi0 wlan0: ieee80211_newstate_cb: INIT -> INIT arg -1 wlan0: sta_newstate: INIT -> INIT (-1) wlan0: start running, 0 vaps running wlan0: ieee80211_start_locked: up parent iwlwifi0 wlan0: ieee80211_new_state_locked: INIT -> SCAN (arg 0) (nrunning 0 nscanning 0) wlan0: start running, 1 vaps running wlan0: ieee80211_newstate_cb: INIT -> SCAN arg 0 wlan0: sta_newstate: INIT -> SCAN (0) wlan0: [ac:22:0b:d4:8c:30] station assoc via MLME wlan0: ieee80211_alloc_node 0xfffffe009ebcc000