Re: bhyve nvidia gtx-1650 mobile passthru on win11
Date: Tue, 19 Dec 2023 13:43:26 UTC
It's easy to configure and run a graphics passthru, https://wiki.freebsd.org/bhyve/pci_passthru gives that info. Stephan Althaus <Stephan.Althaus@duedinghausen.eu> escreveu no dia terça, 19/12/2023 à(s) 07:43: > On 12/17/23 11:51, Mario Marietto wrote: > > AMD gpu works great with bhyve and they are recognized by a Windows vm. > > On Sun, Dec 17, 2023 at 11:43 AM Stephan Althaus < > Stephan.Althaus@duedinghausen.eu> wrote: > >> On 12/16/23 18:49, Mario Marietto wrote: >> >> for sure you can use nVidia gpu on the host and the intel one on the >> windows 11 vm. >> >> Il sab 16 dic 2023, 18:11 Nuno Teixeira <eduardo@freebsd.org> ha scritto: >> >>> It seems that nvidia passtrhu isn't working (yet). >>> >>> Related to intel integrated graphics, I don't know if I can use it for >>> ppt since it is in use by freebsd. >>> Other thing, if I boot with BIOS on nvidia dedicated then intel doesn't >>> show up in pciconf... >>> >>> Mario Marietto <marietto2008@gmail.com> escreveu no dia sábado, >>> 16/12/2023 à(s) 16:34: >>> >>>> Are you trying to pass the nvidia gpu to windows vm ? or your intel gpu >>>> ? >>>> >>>> Il sab 16 dic 2023, 17:07 Nuno Teixeira <eduardo@freebsd.org> ha >>>> scritto: >>>> >>>>> Hello all, >>>>> >>>>> Specs: >>>>> - laptop with integrated intel + dedicated nvidia >>>>> - 15-CURRENT 3b1904d9eb04 amd64 >>>>> - win11 with nvme and tpm >>>>> >>>>> I'm sharing my results with nvidia passthru: >>>>> ### >>>>> /boot/loader.conf.local: >>>>> vmm_load="YES" >>>>> pptdevs="1/0/0 1/0/1" >>>>> >>>>> ppt0@pci0:1:0:0: class=0x030000 rev=0xa1 hdr=0x00 >>>>> vendor=0x10de device=0x1f99 subvendor=0x17aa subdevice=0x3fa5 >>>>> vendor = 'NVIDIA Corporation' >>>>> device = 'TU117M [GeForce GTX 1650 Mobile / Max-Q]' >>>>> class = display >>>>> subclass = VGA >>>>> ppt1@pci0:1:0:1: class=0x040300 rev=0xa1 hdr=0x00 >>>>> vendor=0x10de device=0x10fa subvendor=0x17aa subdevice=0x3ffb >>>>> vendor = 'NVIDIA Corporation' >>>>> class = multimedia >>>>> subclass = HDA >>>>> >>>>> bhyve: >>>>> -s 6:0,passthru,1/0/0 -s 6:1,passthru,1/0/1 >>>>> ### >>>>> >>>>> - Installed nvidia drivers without problems >>>>> - graphic card is detected but is deactivated with a triangle and a >>>>> "!": >>>>> "Windows stopped this device... code 43" >>>>> - hda is detected and shows no problem >>>>> >>>>> I've read that some nvidia cards are working... >>>>> Any tips are welcome. >>>>> >>>>> Not sure if it is possible to use intel integrated as it is already in >>>>> use by OS. >>>>> >>>>> Thanks, >>>>> >>>>> -- >>>>> Nuno Teixeira >>>>> FreeBSD Committer (ports) >>>>> >>>> >>> >>> -- >>> Nuno Teixeira >>> FreeBSD Committer (ports) >>> >> Hello! >> >> i had just the same, here on illumos. >> i didn't get it to work, but i had a similar problem with an AMD card :-/ >> >> i think i will try it again in Jan/2024, and then with a fresh install of >> windows... >> >> Do you use UEFI boot on both host and vm? >> >> Regards, >> Stephan >> >> >> > > -- > Mario. > > Hello! > > I have a AMD RX 6400. > > Is there a HCL for GPU passthrough ? > Any HowTo for AMD card passthrough ? > > Is the AMD RX 6400 ht by the "RESET" hw bug ? > > > Any hints are welcome :-) > > > Regards, > > Stephan Althaus > > > -- Nuno Teixeira FreeBSD Committer (ports)