FreeBSD 14 does not boot if bhyve points to the SATA disk where it is installed phisically

 Hello to everyone.

I'm running FreeBSD 13 RELEASE p6 and I'm trying to boot FreeBSD 14 CURRENT
that I have installed on the SATA disk mapped at /dev/da1 as follows :

da1 at umass-sim1 bus 1 scbus6 target 0 lun 0
da1: <SAMSUNG HM320JI 0> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number 20140100006C
da1: 400.000MB/s transfers
da1: 305245MB (625142448 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>


=>       40  625142368  da1  GPT  (298G)
        40     532480    1  efi  (260M)
    532520  616030208    2  freebsd-ufs  (294G)
 616562728    8388608    3  freebsd-swap  (4.0G)
 624951336     191072       - free -  (93M)

this is the bhyve arguments that I'm using :

bhyve -S -c sockets=1,cores=2,threads=2 -m 4G -w -H -A \
-s 0,hostbridge \
-s 1,ahci-hd,/dev/da1 \
-s 8,virtio-net,tap1 \
-s 9,virtio-9p,sharename=/home/marietto \
-s 30,xhci,tablet \
-s 31,lpc \
-s 29,fbuf,tcp=0.0.0.0:5901,w=1440,h=900 \
-l bootrom,/usr/local/share/uefi-firmware/BHYVE_BHF_CODE.fd \
-l com1,stdio \
vm1

Unfortunately bhyve is not able to boot FreeBSD 14 from that disk. This is
what it says :

BdsDxe: failed to load Boot0001 "UEFI BHYVE SATA DISK BHYVE-811A-F482-43F7"
from PciRoot(0x0)/Pci(0x
2,0x0)/Sata(0x0,0xFFFF,0x0): Not Found

UEFI Interactive Shell v2.2
EDK II
UEFI v2.70 (BHYVE, 0x00010000)
Mapping table
BLK0: Alias(s):
PciRoot(0x0)/Pci(0x2,0x0)/Sata(0x0,0xFFFF,0x0)

Where is the problem here ?

-- 
Mario.