[Bug 296157] if_ure(4): RTL8153 stalls on ASUS Meteor Lake USB controller with URE_MAX_TX=4; fixed by URE_MAX_TX=1

From: <bugzilla-noreply_at_freebsd.org>
Date: Sat, 20 Jun 2026 11:08:26 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=296157

--- Comment #1 from Oleg <oleglelchuk@gmail.com> ---
There is a separate RTL8153 “dirty firmware/device state” issue that can occur
  when the adapter is plugged directly into the laptop before boot. That issue
  affects both my ASUS and Dell laptops, and also affects Linux. It can be
worked
  around by unplugging/replugging the adapter after the OS is running.

  To avoid that separate issue during this report’s testing, I used an external
  GenesysLogic USB3.1 hub. With the RTL8153 connected through this hub, the
dirty
  firmware/device state does not occur across cold boot.

  The bug reported here is different: even with the GenesysLogic hub avoiding
the
  dirty firmware state, stock FreeBSD if_ure still stalls on the ASUS/Meteor
Lake
  system, while the same hub + same RTL8153 adapter works fine on the Dell
  Latitude 5590 with stock FreeBSD if_ure. The URE_MAX_TX=1 patch fixes this
ASUS/FreeBSD-specific stall. On both the Asus and Dell laptops, with the
GenesysLogic hub/RTL8153 adapter combination, things will be fine on Linux.

-- 
You are receiving this mail because:
You are the assignee for the bug.