[Bug 262882] [13.1-RC5] usb disconnects repeatedly, losing all attached devices on that USB hub

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=262882

--- Comment #26 from Hans Petter Selasky <hselasky@FreeBSD.org> ---
Emanuel Haupt:

There are were few relevant changes in that delta:

Can you provide the output from dmesg, when "sysctl hw.usb.xhci.debug=16" when
the issue occurs.

You need "options USB_DEBUG" in the kernel configuration.

Does this reverting/applying the commit below change anything.

Do you know if your device is attached via thunderbolt?

--HPS

commit 245d5a65f5805864881e2601190e7783057d2768
Author: Hans Petter Selasky <hselasky@FreeBSD.org>
Date:   Thu Apr 21 16:59:09 2022 +0200

    xhci(4): Ensure the so-called data toggle gets properly reset.

    Use the drop and enable endpoint context commands to force a reset of
    the data toggle for USB 2.0 and USB 3.0 after:
     - clear endpoint halt command (when the driver wishes).
     - set config command (when the kernel or user-space wants).
     - set alternate setting command (only affected endpoints).

    Some XHCI HW implementations may not allow the endpoint reset command when
    the endpoint context is not in the halted state.

    Reported by:            Juniper and Gary Jennejohn
    Approved by:            re (gjb)
    Sponsored by:           NVIDIA Networking

    (cherry picked from commit cda31e734925346328fd2369585ab3f6767ec225)

-- 
You are receiving this mail because:
You are the assignee for the bug.