xhci data toggle out of sync
- Reply: Hans Petter Selasky : "Re: xhci data toggle out of sync"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 18 Apr 2022 16:44:39 UTC
Hi all, Need your help regarding an urgent issue where we are observing an issue with Freebsd stable/12. The data toggles for BOT endpoint (DATA0/DATA1) are out of sync with respect to EP and the system experiences the READ(10) errors. The READ(10) error recovers within couple of retries most of the times but few cases we have observed that the read retries gets exhausted and system moves to unusable state (continuous g_vfs_done() errors) . We are using Junos but the xhci driver etc.. are all pristine stable 12 drivers no Juniper specific changes. This issue was never observed with Linux kernel 5.4.2 on the same HW suspecting if it's a xhci driver error recovery issue. Errors Seen on console (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 28 cf 28 00 00 40 00 (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (da0:umass-sim0:0:0:0): Retrying command, 3 more tries remain (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 28 cf 28 00 00 40 00 (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (da0:umass-sim0:0:0:0): Retrying command, 2 more tries remain FreeBSD/arm (Amnesiac) (ttyu0) login: Please let us know is there a place holder to upload the traces and provide a link here ? Thanks, Mahesh Juniper Business Use Only