[Bug 262093] Error increment after version upgrade

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=262093

            Bug ID: 262093
           Summary: Error increment after version upgrade
           Product: Base System
           Version: 12.3-RELEASE
          Hardware: amd64
                OS: Any
            Status: New
          Severity: Affects Only Me
          Priority: ---
         Component: standards
          Assignee: standards@FreeBSD.org
          Reporter: cristian.cardoso11@gmail.com

After updating FreeBSD 12.2-RELEASE to version 12.3-RELEASE I detected an error
increment in the Intel X710 interface on my router

I'm using the driver provided by the system natively IXL.

I already changed the SFP+ modules and optical cable, the error problem
persists.

Error increment issue started after reboot to complete version upgrade.

# ifconfig -v ixl0
ixl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=e500bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:7c:52:60
        media: Ethernet autoselect (10Gbase-SR <full-duplex>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
        vendor: Intel Corp PN: FTLX8574D3BCV-IT SN: N52E8V6 DATE: 2016-05-02
        module temperature: 34.32 C Voltage: 3.36 Volts
        RX: 0.54 mW (-2.66 dBm) TX: 0.57 mW (-2.44 dBm)


ixl0@pci0:130:0:0:      class=0x020000 card=0x00068086 chip=0x15728086 rev=0x02
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Ethernet Controller X710 for 10GbE SFP+'
    class      = network
    subclass   = ethernet
ixl1@pci0:130:0:1:      class=0x020000 card=0x00008086 chip=0x15728086 rev=0x02
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Ethernet Controller X710 for 10GbE SFP+'
    class      = network
    subclass   = ethernet

-- 
You are receiving this mail because:
You are the assignee for the bug.