Re: zfs mirrored pool dead after a disk death and reset

Hello,

Jeez, my bad, looks like I created a non-mirrored pool. :)

On 25.02.2022 18:53, Eugene M. Zheganin wrote:
> Hello,
>
> On 25.02.2022 18:30, Steven Hartland wrote:
>> Have you tried removing the dead disk physically. I've seen in the 
>> past a bad disk sending causing bad data to be sent to the controller 
>> causing knock on issues.
>
> Yup, I did. I've even built 13.0 and tried to import it there. 13.0 
> complains dirrerently, but still refuses to import:
>
>
> # zpool import
> pool: data
> id: 15967028801499953224
> state: ONLINE
> status: One or more devices contains corrupted data.
> action: The pool can be imported using its name or numeric identifier.
> see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J
> config:
> data        ONLINE
> nvd0      UNAVAIL  corrupted data
> nvd1      ONLINE
>
>
> And while importing:
>
> # zpool import -FX data
> cannot import 'data': one or more devices is currently unavailable
>
> and I see the following in dmesg:
>
> Feb 25 16:44:41 db0 ZFS[4857]: failed to load zpool data
> Feb 25 16:44:41 db0 ZFS[4873]: failed to load zpool data
> Feb 25 16:44:41 db0 ZFS[4889]: failed to load zpool data
> Feb 25 16:44:41 db0 ZFS[4909]: failed to load zpool data
> Feb 25 16:45:13 db0 ZFS[4940]: pool log replay failure, zpool=data
> Feb 25 16:45:13 db0 ZFS[4952]: pool log replay failure, zpool=data
> Feb 25 16:45:13 db0 ZFS[4964]: pool log replay failure, zpool=data
> Feb 25 16:45:13 db0 ZFS[4976]: pool log replay failure, zpool=data
>
>>
>> Also the output doesn't show multiple devices, only nvd0. I'm hoping 
>> you didn't use nv raid to create the mirror, as that means there's no 
>> ZFS protection?
> Nope, I'm aware of that. Acrually, the redundant drive is still there, 
> but dead already, it's the FAULTED device 9566965891719887395 in my 
> quotes below.
>
>>
>>     [root@db0:~]# zpool import
>>     pool: data
>>     id: 15967028801499953224
>>     state: FAULTED
>>     status: One or more devices contains corrupted data.
>>     action: The pool cannot be imported due to damaged devices or data.
>>     The pool may be active on another system, but can be imported using
>>     the '-f' flag.
>>     see: http://illumos.org/msg/ZFS-8000-5E
>>     config:
>>     data                   FAULTED  corrupted data
>>     9566965891719887395  FAULTED  corrupted data
>>     nvd0                 ONLINE
>>
>
> Thanks.
>
> Eugene.
>
>