From nobody Thu May 01 15:28:16 2025 X-Original-To: freebsd-riscv@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4ZpHy55tR3z5vKDl for ; Thu, 01 May 2025 15:28:29 +0000 (UTC) (envelope-from pusateri@keehole.org) Received: from kem.keehole.org (kem.keehole.org [136.41.224.255]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 4ZpHy471wlz3XvY for ; Thu, 01 May 2025 15:28:28 +0000 (UTC) (envelope-from pusateri@keehole.org) Authentication-Results: mx1.freebsd.org; dkim=pass header.d=keehole.org header.s=202408 header.b="ieNi/hua"; spf=pass (mx1.freebsd.org: domain of pusateri@keehole.org designates 136.41.224.255 as permitted sender) smtp.mailfrom=pusateri@keehole.org; dmarc=pass (policy=none) header.from=keehole.org Received: from smtpclient.apple (syn-107-013-239-254.res.spectrum.com [107.13.239.254]) (using TLSv1.2 with cipher ECDHE-ECDSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by kem.keehole.org (Postfix) with ESMTPSA id 59C181199 for ; Thu, 01 May 2025 11:28:27 -0400 (EDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=keehole.org; s=202408; t=1746113307; bh=D0iG323nW63CCHgF5bSuPRR9HTpDtLKHIONntCKFvw8=; h=From:Subject:Date:To:From; b=ieNi/huaGF4gHTUH0vzfkQw7W01qo3igUaWAUsOkW4HPxi/9nMNMsUvOvlGfel8nn Y9IuNt5vxX0OMkI5MHu58odeF2mKNBLZ/V+9gmkMeJwopd0rvxLSu+FUOGovQEdql0 /gO8CcEfPUVpP6+Buw6Ttjnakv4PpX3PW1D01xqh/9s313GnyIaiomKQJplxLxij7Y KJbL0U1MHFwBgPTN6zu5MAOIQNDCLuyb3EVq30r8ImuNks57RX9ZlmN/p0GvJBzxLP 6L0Plhgd0uc8kmOI5JmmLJgR8k47XqYQEbkGM/+enWc3Jf76MB5Aa16+qvBw01rn6L 3gTHYf++/iyTw== From: Tom Pusateri Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable List-Id: FreeBSD on the RISC-V instruction set architecture List-Archive: https://lists.freebsd.org/archives/freebsd-riscv List-Help: List-Post: List-Subscribe: List-Unsubscribe: X-BeenThere: freebsd-riscv@freebsd.org Sender: owner-freebsd-riscv@FreeBSD.org Mime-Version: 1.0 (Mac OS X Mail 16.0 \(3776.700.51.11.2\)) Subject: Orange Pi RV2 boot with some success Message-Id: Date: Thu, 1 May 2025 11:28:16 -0400 To: freebsd-riscv@freebsd.org X-Mailer: Apple Mail (2.3776.700.51.11.2) X-Rspamd-Queue-Id: 4ZpHy471wlz3XvY X-Spamd-Bar: / X-Spamd-Result: default: False [0.53 / 15.00]; NEURAL_SPAM_LONG(1.00)[1.000]; NEURAL_HAM_SHORT(-0.91)[-0.913]; NEURAL_SPAM_MEDIUM(0.74)[0.740]; MV_CASE(0.50)[]; DMARC_POLICY_ALLOW(-0.50)[keehole.org,none]; R_DKIM_ALLOW(-0.20)[keehole.org:s=202408]; R_SPF_ALLOW(-0.20)[+mx:c]; ONCE_RECEIVED(0.20)[]; MIME_GOOD(-0.10)[text/plain]; RCPT_COUNT_ONE(0.00)[1]; RCVD_COUNT_ONE(0.00)[1]; ARC_NA(0.00)[]; RCVD_VIA_SMTP_AUTH(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:16591, ipnet:136.32.0.0/11, country:US]; RCVD_TLS_ALL(0.00)[]; MLMMJ_DEST(0.00)[freebsd-riscv@freebsd.org]; PREVIOUSLY_DELIVERED(0.00)[freebsd-riscv@freebsd.org]; FROM_HAS_DN(0.00)[]; MID_RHS_MATCH_FROM(0.00)[]; FROM_EQ_ENVFROM(0.00)[]; TO_MATCH_ENVRCPT_ALL(0.00)[]; TO_DN_NONE(0.00)[]; DKIM_TRACE(0.00)[keehole.org:+] I tried booting FreeBSD on the risc-v ($64 Amazon) Orange Pi RV2 with a = USB thumb drive riscv image of 14.2-RELEASE. The kernel booted but it was unable to mount the root filesystem and no = filesystems were listed in mountroot. Showing the boot loader variables = has the correct currdev and lsdev looks correct. Here is a log: # cu -l /dev/ttyU0 -s 115200 Connected sys: 0x200 try sd... bm:3 ERROR: CMD8 ERROR: sd f! l:76 bm:4 nor m:0x20 d:0x4118 j... U-Boot SPL 2022.10ky (Jan 07 2025 - 13:44:01 +0800) [ 0.219] DDR type LPDDR4X [ 0.231] lpddr4_silicon_init consume 12ms [ 0.232] Change DDR data rate to 2400MT/s [ 0.448] Boot from fit configuration x1_orangepi-rv2 [ 0.450] ## Checking hash(es) for config conf_14 ... OK [ 0.455] ## Checking hash(es) for Image opensbi ... OK [ 0.461] ## Checking hash(es) for Image uboot ... OK [ 0.466] ## Checking hash(es) for Image fdt_14 ... OK [ 0.511]=20 U-Boot 2022.10ky (Jan 07 2025 - 13:44:01 +0800) [ 0.514] CPU: rv64imafdcv [ 0.516] Model: ky x1 orangepi-rv2 board [ 0.520] DRAM: DDR size =3D 8192 MB [ 0.524] DDR size =3D 8192 MB [ 0.526] DDR size =3D 8192 MB [ 0.529] 8 GiB [ 0.604] reset driver probe start=20 [ 0.606] reset driver probe finish=20 [ 0.614] DCDC_REG1@dcdc1: enabling [ 0.616] DCDC_REG3@dcdc3: enabling [ 0.621] LDO_REG1@ldo1: enabling [ 0.625] SWITCH_REG1@switch1: enabling [ 0.626] SWITCH_REG2@pwr-event: enabling [ 0.630] SWITCH_REG3@pwr-int: enabling [ 0.633] SWITCH_REG4@rtc-ctrl: enabling [ 0.637] SWITCH_REG5@rtc-event: enabling [ 0.641] SWITCH_REG6@rtc-irq: enabling [ 0.645] SWITCH_REG7@power-down: enabling [ 0.649] SWITCH_REG8@reboot-flag: enabling [ 0.654] vcc3v3-pcie-regulator@vcc3v3_pcie: set 3300000 uV; enabling [ 0.659] DDR size =3D 8192 MB [ 0.664] Core: 416 devices, 30 uclasses, devicetree: board [ 0.678] WDT: Started PMIC_WDT with servicing (60s timeout) [ 0.683] WDT: Started watchdog@D4080000 with servicing (60s timeout) [ 0.691] MMC: sdh@d4280000: probe done. [ 0.697] sdh@d4281000: probe done. [ 0.698] sdh@d4280000: 0, sdh@d4281000: 2 [ 0.702] Loading Environment from SPIFlash... x1_qspi spi@d420c000: = qspi iobase:0x0x00000000d420c000, ahb_addr:0x0x00000000b8000000, = max_hz:26500000Hz [ 0.717] x1_qspi spi@d420c000: rx buf size:128, tx buf size:256, ahb = buf size=3D512 [ 0.725] x1_qspi spi@d420c000: AHB read enabled [ 0.729] x1_qspi spi@d420c000: bus clock: 26500000Hz, PMUap = reg[0xd4282860]:0x0000075b [ 0.737] x1_qspi spi@d420c000: AHB buf size: 512 [ 0.741] SF: Detected XM25QH128A with page size 256 Bytes, erase size = 64 KiB, total 16 MiB OK [ 0.764] Now init Rterm... [ 0.764] pcie prot id =3D 1, porta_init_done =3D 0 [ 0.768] Now waiting portA resister tuning done... [ 0.772] porta redonly_reg2: 00006d47 [ 0.776] pcie_rcal =3D 0x00006d47 [ 0.779] pcie port id =3D 1, lane num =3D 2 [ 0.783] Now int init_puphy... [ 0.786] waiting pll lock... [ 0.789] Now finish init_puphy.... [ 0.792] pcie_dw_x1 pcie@ca400000: Unable to get phy0 [ 0.797] pcie_dw_x1 pcie@ca400000: Unable to get phy1 [ 1.903] PCIE-0: Link down [ 1.908] sdh@d4281000: 74 clk wait timeout(100) [ 1.925] Card did not respond to voltage select! : -110 [ 1.927] mmc_init: -95, time 20 [ 1.946] Card did not respond to voltage select! : -110 [ 1.948] mmc_init: -95, time 18 [ 1.980] Found device 'hdmi@c0400500', disp_uc_priv=3D000000007deb4a70 [ 2.090] HDMI cannot get HPD signal [ 2.090] ky_display_init: device 'dpu@c0340000' display won't probe = (ret=3D-1) [ 2.097] initialize_console_log_buffer [ 2.101] Have allocated memory for console log buffer [ 2.106] In: serial [ 2.108] Out: serial [ 2.110] Err: serial [ 2.114] Default to 100kHz [ 2.129] EEPROM: TlvInfo v1 len=3D38 [ 2.129] valid ethaddr: c0:74:2b:fc:fd:5a [ 2.133] Cannot find TLV data: part# [ 2.137] Cannot find TLV data: serial# [ 2.140] Cannot find TLV data: manufacture_date [ 2.145] Cannot find TLV data: manufacturer [ 2.149] Cannot find TLV data: device_version [ 2.153] Cannot find TLV data: sdk_version [ 2.261] HDMI cannot get HPD signal [ 2.261] display devices not found or not probed yet: -1 [ 2.266] All buttons probed successfully [ 2.271] Read PMIC reg ab value f0 [ 2.274] Failed to get fastboot key config: -19 [ 2.279] sdh@d4280000: 74 clk wait timeout(100) [ 2.282] MMC: no card present [ 2.285] mmc_init: -123, time 7 [ 2.304] Card did not respond to voltage select! : -110 [ 2.306] mmc_init: -95, time 18 [ 2.309] can not get available blk dev [ 2.313] Net: RGMII interface [ 2.316] eth0: ethernet@cac80000 [ 2.322] Autoboot in 0 seconds [ 2.332] starting USB... [ 2.332] Bus ehci1@c0980100: ehci_x1_ci ehci1@c0980100: ehci_mv_probe = Enter ...=20 [ 2.342] mv_usb_phy usbphy1@c09c0000: x1-ci-usb-phy-probe: Enter... [ 2.347] ehci_x1_ci ehci1@c0980100: ehci-x1-ci: init hccr c0980100 and = hcor c0980140 hc_length 64 [ 2.369] USB EHCI 1.00 [ 2.369] Bus dwc3@c0a00000: No USB maximum speed specified. Using = super speed [ 2.382] mv_usb_phy usb2phy@0xc0a30000: x1-ci-usb-phy-probe: Enter... [ 2.386] x1_combphy phy@c0b10000: USB3 PHY init. [ 2.390] dwc3-generic-host dwc3@c0a00000: this is a DesignWare USB3 = DRD Core [ 2.807] Register 2000140 NbrPorts 2 Starting the controller [ 2.810] USB XHCI 1.10 [ 2.812] scanning bus ehci1@c0980100 for devices... 1 USB Device(s) = found [ 3.955] scanning bus dwc3@c0a00000 for devices... 4 USB Device(s) = found [ 5.494] scanning usb for storage devices... 1 Storage = Device(s) found [ 5.498]=20 Device 0: Vendor: PNY Rev: PMAP Prod: USB 2.0 FD =20 [ 5.505] Type: Removable Hard Disk [ 5.509] Capacity: 29603.0 MB =3D 28.9 GB (60626944 x 512) [ 5.515] ... is now current device [ 5.554] Scanning usb 0:1... [ 5.573] ** Unable to read file / ** [ 5.574] Failed to load '/' [ 5.581] sdh@d4280000: 74 clk wait timeout(100) [ 5.591] MMC: no card present [ 5.594] mmc_init: -123, time 4 [ 5.599] ** Unable to read file ubootefi.var ** [ 5.601] Failed to load EFI variables [ 5.812] BootOrder not defined [ 5.812] EFI boot manager: Cannot load any image [ 5.820] Found EFI removable media binary efi/boot/bootriscv64.efi [ 5.854] 711412 bytes read in 23 ms (29.5 MiB/s) [ 5.859] Booting /efi\boot\bootriscv64.efi [ 5.861]=20 Consoles: EFI console =20 Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: FreeBSD/riscv EFI loader, Revision 3.0 Command line arguments: earlycon=3Dsbi earlyprintk quiet splash = plymouth.ignore-serial-consoles plymouth.prefer-fbcon = console=3DttyS0,115200 loglevel=3D8 clk_ignore_unused swiotlb=3D65536 = rdinit=3D/init workqueue.default_affinity_scope=3Dsystem = mtdparts=3Dd420c000.spi-0:64K@0(bootinfo),64K@64K(private),256K@128K(fsbl)= ,64K@384K(env),192K@448K(opensbi),-@640K(uboot) root=3D rootfstype=3Dext4 Image base: 0x7dcd1000 EFI version: 2.90 EFI Firmware: Das U-Boot (rev 8226.4096) Console: ttyS0,115200 (0) Load Path: /efi\boot\bootriscv64.efi Load Device: = /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)= /UsbClass(0x5e3,0x610,0x9,0x0,0x2)/UsbClass(0x154b,0xee,0x0,0x0,0x0)/HD(1,= GPT,89edfb5a-ae52-11ef-a6a4-002590ec5bf2,0x22,0x10418) Trying ESP: = /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)= /UsbClass(0x5e3,0x610,0x9,0x0,0x2)/UsbClass(0x154b,0xee,0x0,0x0,0x0)/HD(1,= GPT,89edfb5a-ae52-11ef-a6a4-002590ec5bf2,0x22,0x10418) Setting currdev to disk0p1: Trying: = /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)= /UsbClass(0x5e3,0x610,0x9,0x0,0x2)/UsbClass(0x154b,0xee,0x0,0x0,0x0)/HD(2,= GPT,89edfb64-ae52-11ef-a6a4-002590ec5bf2,0x1043a,0x219380) Setting currdev to disk0p2: Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local c\ ______ ____ _____ _____ =20 | ____| | _ \ / ____| __ \=20 | |___ _ __ ___ ___ | |_) | (___ | | | | | ___| '__/ _ \/ _ \| _ < \___ \| | | | | | | | | __/ __/| |_) |____) | |__| | | | | | | | || | | | |_| |_| \___|\___||____/|_____/|_____/ ``` = ` s` = `.....---.......--.``` -/ +---------- Welcome to FreeBSD -----------+ +o .--` /y:` = +. | | yo`:. :o = `+- | 1. Boot Installer [Enter] | y/ -/` = -o/ | 2. Boot Single user | .- = ::/sy+:. | 3. Escape to loader prompt | / = `-- / | 4. Reboot | `: = :` | 5. Cons: Video | `: = :` | | / = / | Options: | .- = -. | 6. Kernel: default/kernel (1 of 1) | -- = -. | 7. Boot Options | `:` = `:` | | .-- = `--. | | .---.....----. +-----------------------------------------+ = =20 Exiting menu! Type '?' for a list of commands, 'help' for more detailed help. OK show COLUMNS=3D80 LINES=3D24 acpi_dsdt_load=3DNO acpi_dsdt_name=3D/boot/acpi_dsdt.aml acpi_dsdt_type=3Dacpi_dsdt acpi_video_load=3DNO audit_event_load=3DNO audit_event_name=3D/etc/security/audit_event audit_event_type=3Detc_security_audit_event autoboot_delay=3DNO bitmap_load=3DNO bitmap_name=3Dsplash.bmp bitmap_type=3Dsplash_image_data bootenv_autolist=3DYES bootfile=3Dkernel clk_ignore_unused=3D1 console=3Defi,comconsole cpu_microcode_load=3DNO cpu_microcode_name=3D/boot/firmware/ucode.bin cpu_microcode_type=3Dcpu_microcode currdev=3Ddisk0p2: earlycon=3Dsbi earlyprintk=3D1 efi-version=3D2.90 =20 efi_max_resolution=3D1x1 entropy_cache_load=3DYES entropy_cache_name=3D/boot/entropy entropy_cache_type=3Dboot_entropy_cache entropy_efi_seed=3DYES entropy_efi_seed_size=3D2048 hint.acpi.0.disabled=3D1 hint.smbios.0.mem=3D0x7dd87000 hostuuid_load=3DYES hostuuid_name=3D/etc/hostid hostuuid_type=3Dhostuuid interpret=3DOK kernel=3Dkernel kernel_options=3D kernels_autodetect=3DNO loaddev=3Ddisk0p2: loader_conf_dirs=3D/boot/loader.conf.d loader_menu_multi_user_prompt=3DInstaller local_loader_conf_files=3D/boot/loader.conf.local loglevel=3D8 module_blacklist=3Ddrm drm2 radeonkms i915kms amdgpu module_path=3D/boot/modules;/boot/dtb;/boot/dtb/overlays module_verbose=3D2 =20 = mtdparts=3Dd420c000.spi-0:64K@0(bootinfo),64K@64K(private),256K@128K(fsbl)= ,64K@384K(env),192K@448K(opensbi),-@640K(uboot) nextboot_conf=3D/boot/nextboot.conf plymouth.ignore-serial-consoles=3D1 plymouth.prefer-fbcon=3D1 prompt=3D${interpret} quiet=3D1 ram_blacklist_load=3DNO ram_blacklist_name=3D/boot/blacklist.txt ram_blacklist_type=3Dram_blacklist rdinit=3D/init root=3D rootfstype=3Dext4 screensave_load=3DNO screensave_name=3Dgreen_saver script.lang=3Dlua smbios.bios.reldate=3D10/01/2022 smbios.bios.revision=3D22.10 smbios.bios.vendor=3DU-Boot smbios.bios.version=3D2022.10ky smbios.chassis.maker=3DUnknown smbios.chassis.type=3DDesktop smbios.planar.maker=3DUnknown smbios.planar.product=3DUnknown Product =20 smbios.socket.enabled=3D1 smbios.system.maker=3DUnknown smbios.system.product=3DUnknown Product smbios.system.serial=3D0123456789ABCDEF smbios.system.uuid=3D33323130-3534-3736-3839-414243444546 smbios.version=3D3.0 splash=3D1 splash_bmp_load=3DNO splash_pcx_load=3DNO splash_txt_load=3DNO swiotlb=3D65536 twiddle_divisor=3D16 verbose_loading=3DNO vesa_load=3DNO vfs.mountroot.timeout=3D10 workqueue.default_affinity_scope=3Dsystem OK ? Available commands: staging_slop set staging slop efi-autoresizeconEFI Auto-resize Console gop graphics output protocol uga universal graphics adapter efi-seed-entropy try to get entropy from the EFI RNG poweroff power off the system reboot reboot the system memmap print memory map configuration print configuration tables mode change or display EFI text modes lsefi list EFI handles fdt flattened device tree handling chain chain load file netserver change or display netserver URI loadfont load console font from file boot boot a file or loaded kernel autoboot boot automatically after a delay help detailed help ? list commands show show variable(s) set set a variable unset unset a variable echo echo arguments =20 read read input from the terminal more show contents of a file lsdev list all devices readtest Time a file read quit exit the loader include read commands from a file ls list files load load a kernel or module load_geli load a geli key unload unload all modules lsmod list loaded modules pnpmatch list matched modules based on pnpinfo pnpload load matched modules based on pnpinfo pnpautoload auto load modules based on pnpinfo nvstore manage non-volatile data map-vdisk map file as virtual disk unmap-vdisk unmap virtual disk bcachestat get disk block cache stats lszfs list child datasets of a zfs dataset reloadbe refresh the list of ZFS Boot Environments efi-show print some or all EFI variables efi-set set EFI variables efi-unset delete / unset EFI variables =20 OK lsdev disk devices: disk0: 60626944 X 512 blocks (removable) disk0p1: EFI disk0p2: FreeBSD UFS http: (unknown) net devices: OK boot Loading kernel... /boot/kernel/kernel text=3D0x5b145e text=3D0x15002c data=3D0xf2170 = data=3D0x2038+0x1d13b0 0x8+0x21dc9b0+0x8+0xf507a Loading configured modules... can't find '/boot/entropy' can't find '/etc/hostid' Using DTB provided by EFI at 0x7eed000. Kernel entry at 0x75e0002e... Kernel args: (null) ---<>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC riscv FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git = llvmorg-18.1.6-0-g1118c2e05e67) VT: init without driver. SBI: OpenSBI v1.3 SBI Specification Version: 1.0 CPU 0 : Vendor=3DUnknown Core=3DUnknown (Hart 0) marchid=3D0x8000000058000001, mimpid=3D0x1000000049772200 MMU: 0x1 ISA: 0x112d S-mode Extensions: 0 real memory =3D 2147479552 (2047 MB) avail memory =3D 2036195328 (1941 MB) FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs CPU 1 : Vendor=3DUnknown Core=3DUnknown (Hart 1) CPU 2 : Vendor=3DUnknown Core=3DUnknown (Hart 2) CPU 3 : Vendor=3DUnknown Core=3DUnknown (Hart 3) CPU 4 : Vendor=3DUnknown Core=3DUnknown (Hart 4) CPU 5 : Vendor=3DUnknown Core=3DUnknown (Hart 5) CPU 6 : Vendor=3DUnknown Core=3DUnknown (Hart 6) CPU 7 : Vendor=3DUnknown Core=3DUnknown (Hart 7) arc4random: WARNING: initial seeding bypassed the cryptographic random = device because it was not yet seeded and the knob = 'bypass_before_seeding' was enabled. random: entropy device external interface kbd0 at kbdmux0 ofwbus0: ofw_clkbus0: on ofwbus0 simplebus0: on ofwbus0 sbi0: intc0: on ofwbus0 sbi_ipi0: on sbi0 plic0: mem 0xe0000000-0xe3ffffff irq = 16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 on simplebus0 timer0: Timecounter "RISC-V Timecounter" frequency 24000000 Hz quality 1000 Event timer "RISC-V Eventtimer" frequency 24000000 Hz quality 1000 rcons0: cpulist0: on ofwbus0 cpu0: on cpulist0 uart0: mem 0xd40170ns8250: = UART FCR is broken uart0: console (109375,n,8,1) Timecounters tick every 1.000 msec usb_needs_explore_all: no devclass sbi_ipi0: using for IPIs Release APs Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... mountroot: waiting for device /dev/ufs/FreeBSD_Install... random: unblocking device. Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. Loader variables: vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install vfs.root.mountfrom.options=3Dro,noatime Manual root filesystem specification: : [options] Mount using filesystem and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:zroot/ROOT/default cd9660:/dev/cd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) Abort manual input mountroot> ? List of GEOM managed disk devices: =20 mountroot>=20 pusateri@midnight-2 Downloads %=20