Re: umass not working and other USB troubles
- Reply: Daniel Lysfjord : "Re: umass not working and other USB troubles"
- In reply to: Andrea Venturoli : "Re: umass not working and other USB troubles"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Thu, 06 Aug 2026 13:19:27 UTC
On 2/25/26 15:10, Andrea Venturoli wrote: > On 1/26/26 18:57, Daniel Lysfjord wrote: > >> XHCI handoff is advised to keep on unless there's something not >> working with it on. > > That was it! Thanks. Hello. Sorry if so long a time has passed... This only half solved. Now when I plug the hard disk in, it doesn't get detected. I need to issue "usbconfig reset" and it will come up. I'll repeat all data: > # freebsd-version -ku > 14.4-RELEASE-p7 > 14.4-RELEASE-p7 > # pciconf -lv > hostb0@pci0:0:0:0: class=0x060000 rev=0x01 hdr=0x00 vendor=0x8086 device=0xa711 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > class = bridge > subclass = HOST-PCI > xhci0@pci0:0:20:0: class=0x0c0330 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a60 subvendor=0x1043 subdevice=0x88a1 > vendor = 'Intel Corporation' > device = 'Raptor Lake USB 3.2 Gen 2x2 (20 Gb/s) XHCI Host Controller' > class = serial bus > subclass = USB > none0@pci0:0:20:2: class=0x050000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a27 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake PCH Shared SRAM' > class = memory > subclass = RAM > none1@pci0:0:21:0: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a4c subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake Serial IO I2C Host Controller' > class = serial bus > none2@pci0:0:21:1: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a4d subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake Serial IO I2C Host Controller' > class = serial bus > none3@pci0:0:21:3: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a4f subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake Serial IO I2C Host Controller' > class = serial bus > none4@pci0:0:22:0: class=0x078000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a68 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake CSME HECI' > class = simple comms > none5@pci0:0:22:1: class=0x078000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a69 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake CSME HECI' > class = simple comms > none6@pci0:0:22:4: class=0x078000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a6c subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake CSME HECI' > class = simple comms > ahci0@pci0:0:23:0: class=0x010601 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a62 subvendor=0x1043 subdevice=0x889f > vendor = 'Intel Corporation' > device = 'Raptor Lake SATA AHCI Controller' > class = mass storage > subclass = SATA > none7@pci0:0:25:0: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a7c subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake Serial IO I2C Host Controller' > class = serial bus > none8@pci0:0:25:1: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a7d subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake Serial IO I2C Host Controller' > class = serial bus > pcib1@pci0:0:28:0: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a38 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake PCI Express Root Port' > class = bridge > subclass = PCI-PCI > pcib3@pci0:0:28:2: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3a subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake PCI Express Root Port' > class = bridge > subclass = PCI-PCI > pcib4@pci0:0:28:3: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3b subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake PCI Express Root Port' > class = bridge > subclass = PCI-PCI > pcib5@pci0:0:28:4: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3c subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake PCI Express Root Port' > class = bridge > subclass = PCI-PCI > none9@pci0:0:31:0: class=0x060100 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a14 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'C262 Chipset LPC/eSPI Controller' > class = bridge > subclass = PCI-ISA > none10@pci0:0:31:4: class=0x0c0500 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a23 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = '700 Series Chipset SMBus Controller' > class = serial bus > subclass = SMBus > none11@pci0:0:31:5: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a24 subvendor=0x8086 subdevice=0x7270 > vendor = 'Intel Corporation' > device = 'Raptor Lake SPI (flash) Controller' > class = serial bus > pcib2@pci0:1:0:0: class=0x060400 rev=0x06 hdr=0x01 vendor=0x1a03 device=0x1150 subvendor=0x1043 subdevice=0x87ed > vendor = 'ASPEED Technology, Inc.' > device = 'AST1150 PCI-to-PCI Bridge' > class = bridge > subclass = PCI-PCI > vgapci0@pci0:2:0:0: class=0x030000 rev=0x52 hdr=0x00 vendor=0x1a03 device=0x2000 subvendor=0x1043 subdevice=0x87ed > vendor = 'ASPEED Technology, Inc.' > device = 'ASPEED Graphics Family' > class = display > subclass = VGA > igb0@pci0:3:0:0: class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x1043 subdevice=0x8557 > vendor = 'Intel Corporation' > device = 'I210 Gigabit Network Connection' > class = network > subclass = ethernet > igb1@pci0:4:0:0: class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x1043 subdevice=0x8557 > vendor = 'Intel Corporation' > device = 'I210 Gigabit Network Connection' > class = network > subclass = ethernet > igb2@pci0:5:0:0: class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x8086 subdevice=0x0002 > vendor = 'Intel Corporation' > device = 'I210 Gigabit Network Connection' > class = network > subclass = ethernet > # usbconfig > ugen0.1: <XHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) > ugen0.2: <UPS American Power Conversion> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (10mA) > ugen0.3: <CP2112 HID I2C Bridge Silicon Labs> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) > ugen0.4: <Virtual Hub American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) > ugen0.5: <Virtual CDROM American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > ugen0.6: <Virtual HDisk Device American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > ugen0.7: <Virtual Ethernet. American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > ugen0.8: <Virtual Keyboard and Mouse American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > ugen0.9: <EXTERNALUSB Toshiba America Inc> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (224mA) If someone has any hint, I'd be happy to let the user manage the disk by himself by just plugging/unplugging it. bye & Thanks av.