Re: Caught signal 6 (Abort trap). Server aborting
- In reply to: hlyg : "Caught signal 6 (Abort trap). Server aborting"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 29 May 2023 03:54:45 UTC
I am no X expert, but it would help you (and those of us who may try to
help troubleshoot) to know what your graphics hardware is. You may need
to install a non-obvious driver from ports, which is what happened to
me. My system will tell me this information if I ask it:
$ pciconf -lv | grep -A4 vga
Or just use the bare `pciconf -lv` and look through the output for
anything that seems likely. On running the command above, with the grep,
I get this response:
vgapci0@pci0:0:2:0: class=0x030000 card=0x08711028 chip=0x3e928086
rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'CoffeeLake-S GT2 [UHD Graphics 630]'
class = display
subclass = VGA
"UHD Graphics 630" meant that I had to install
graphics/drm-fbsd12.0-kmod from ports - but I'm running 12.x. I don't
know if this is the answer for your 13.x system, or for other hardware.
Also, your output suggests you may have an xorg.conf; I think the modern
way is to run without one, at least for starters. The handbook knows
more that I do about this.
Just a couple of thoughts. Best of luck.
And I apologize for top-posting.
On Mon, 29 May 2023, hlyg wrote:
> i have success with xorg's vesa, then i install intel driver, it doesn't
> work, below is X log:
>
> [ 90.612]
> X.Org X Server 1.21.1.7
> X Protocol Version 11, Revision 0
> [ 90.612] Current Operating System: FreeBSD fbsd 13.2-RELEASE FreeBSD
> 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC i386
> [ 90.612]
> [ 90.612] Current version of pixman: 0.42.2
> [ 90.612] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 90.612] Markers: (--) probed, (**) from config file, (==) default
> setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 90.613] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 29 03:09:03
> 2023
> [ 90.629] (==) Using system config directory
> "/usr/local/share/X11/xorg.conf.d"
> [ 90.633] (==) No Layout section. Using the first Screen section.
> [ 90.633] (==) No screen section available. Using defaults.
> [ 90.633] (**) |-->Screen "Default Screen Section" (0)
> [ 90.633] (**) | |-->Monitor "<default monitor>"
> [ 90.636] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 90.636] (==) Automatically adding devices
> [ 90.636] (==) Automatically enabling devices
> [ 90.636] (==) Not automatically adding GPU devices
> [ 90.637] (==) Automatically binding GPU devices
> [ 90.638] (==) Max clients allowed: 256, resource mask: 0x1fffff
> [ 90.673] (==) FontPath set to:
> /usr/local/share/fonts/misc/,
> /usr/local/share/fonts/TTF/,
> /usr/local/share/fonts/OTF/,
> /usr/local/share/fonts/Type1/,
> /usr/local/share/fonts/100dpi/,
> /usr/local/share/fonts/75dpi/,
> catalogue:/usr/local/etc/X11/fontpath.d
> [ 90.673] (==) ModulePath set to "/usr/local/lib/xorg/modules"
> [ 90.673] (II) The server relies on udev to provide the list of input
> devices.
> If no devices become available, reconfigure udev or disable
> AutoAddDevices.
> [ 90.675] (II) Module ABI versions:
> [ 90.675] X.Org ANSI C Emulation: 0.4
> [ 90.675] X.Org Video Driver: 25.2
> [ 90.675] X.Org XInput driver : 24.4
> [ 90.675] X.Org Server Extension : 10.0
> [ 90.686] (--) PCI:*(0@0:2:0) 8086:2a42:8086:2a42 rev 9, Mem @
> 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000c080/8, BIOS @
> 0x????????/65536
> [ 90.686] (--) PCI: (0@0:2:1) 8086:2a43:8086:2a42 rev 9, Mem @
> 0xfea00000/1048576
> [ 90.688] (II) LoadModule: "glx"
> [ 90.692] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
> [ 90.736] (II) Module glx: vendor="X.Org Foundation"
> [ 90.736] compiled for 1.21.1.7, module version = 1.0.0
> [ 90.736] ABI class: X.Org Server Extension, version 10.0
> [ 90.738] (==) Matched intel as autoconfigured driver 0
> [ 90.738] (==) Matched modesetting as autoconfigured driver 1
> [ 90.738] (==) Matched scfb as autoconfigured driver 2
> [ 90.738] (==) Matched vesa as autoconfigured driver 3
> [ 90.738] (==) Assigned the driver to the xf86ConfigLayout
> [ 90.738] (II) LoadModule: "intel"
> [ 90.740] (WW) Warning, couldn't open module intel
> [ 90.740] (EE) Failed to load module "intel" (module does not exist, 0)
> [ 90.740] (II) LoadModule: "modesetting"
> [ 90.740] (II) Loading
> /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
> [ 90.764] (II) Module modesetting: vendor="X.Org Foundation"
> [ 90.764] compiled for 1.21.1.7, module version = 1.21.1
> [ 90.764] Module class: X.Org Video Driver
> [ 90.764] ABI class: X.Org Video Driver, version 25.2
> [ 90.766] (II) LoadModule: "scfb"
> [ 90.766] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
> [ 90.768] (II) Module scfb: vendor="X.Org Foundation"
> [ 90.768] compiled for 1.21.1.7, module version = 0.0.5
> [ 90.768] ABI class: X.Org Video Driver, version 25.2
> [ 90.768] (II) LoadModule: "vesa"
> [ 90.768] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
> [ 90.770] (II) Module vesa: vendor="X.Org Foundation"
> [ 90.770] compiled for 1.21.1.7, module version = 2.5.0
> [ 90.770] Module class: X.Org Video Driver
> [ 90.770] ABI class: X.Org Video Driver, version 25.2
> [ 90.771] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
> [ 90.771] (II) scfb: driver for wsdisplay framebuffer: scfb
> [ 90.771] (II) VESA: driver for VESA chipsets: vesa
> [ 90.771] (--) Using syscons driver with X support (version 2.0)
> [ 90.771] (--) using VT number 9
>
> [ 90.802] (**) modeset(0): claimed PCI slot 0@0:2:0
> [ 90.803] (II) modeset(0): using default device
> [ 90.803] (WW) Falling back to old probe method for scfb
> [ 90.803] scfb trace: probe start
> [ 90.803] scfb trace: probe done
> [ 90.803] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
> support
> [ 90.803] (II) modeset(0): Creating default Display subsection in Screen
> section
> "Default Screen Section" for depth/fbbpp 24/32
> [ 90.804] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
> [ 90.804] (==) modeset(0): RGB weight 888
> [ 90.804] (==) modeset(0): Default visual is TrueColor
> [ 90.804] (II) Loading sub module "glamoregl"
> [ 90.804] (II) LoadModule: "glamoregl"
> [ 90.804] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so
> [ 90.903] (II) Module glamoregl: vendor="X.Org Foundation"
> [ 90.903] compiled for 1.21.1.7, module version = 1.0.1
> [ 90.904] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 93.029] (II) modeset(0): glamor X acceleration enabled on Mesa Mobile
> Intel? GM45 Express Chipset (CTG)
> [ 93.029] (II) modeset(0): glamor initialized
> [ 93.029] (==) modeset(0): VariableRefresh: disabled
> [ 93.029] (==) modeset(0): AsyncFlipSecondaries: disabled
> [ 93.059] (II) modeset(0): Output VGA-1 has no monitor section
> [ 93.060] (II) modeset(0): Output HDMI-1 has no monitor section
> [ 93.061] (II) modeset(0): Output DP-1 has no monitor section
> [ 93.093] (WW) EDID timing clock 85.50 exceeds claimed max 85MHz, fixing
> [ 93.093] (II) modeset(0): EDID for output VGA-1
> [ 93.093] (II) modeset(0): Manufacturer: PHL Model: c07e Serial#: 21518
> [ 93.093] (II) modeset(0): Year: 2014 Week: 41
> [ 93.093] (II) modeset(0): EDID Version: 1.3
> [ 93.093] (II) modeset(0): Analog Display Input, Input Voltage Level:
> 0.700/0.700 V
> [ 93.093] (II) modeset(0): Sync: Separate Composite SyncOnGreen
> [ 93.093] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
> [ 93.093] (II) modeset(0): Gamma: 2.20
> [ 93.093] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
> [ 93.093] (II) modeset(0): First detailed timing is preferred mode
> [ 93.093] (II) modeset(0): redX: 0.638 redY: 0.333 greenX: 0.290 greenY:
> 0.591
> [ 93.093] (II) modeset(0): blueX: 0.153 blueY: 0.082 whiteX: 0.312
> whiteY: 0.329
> [ 93.093] (II) modeset(0): Supported established timings:
> [ 93.094] (II) modeset(0): 720x400@70Hz
> [ 93.094] (II) modeset(0): 640x480@60Hz
> [ 93.094] (II) modeset(0): 800x600@60Hz
> [ 93.094] (II) modeset(0): 1024x768@60Hz
> [ 93.094] (II) modeset(0): Manufacturer's mask: 0
> [ 93.094] (II) modeset(0): Supported detailed timing:
> [ 93.094] (II) modeset(0): clock: 85.5 MHz Image Size: 344 x 194 mm
> [ 93.094] (II) modeset(0): h_active: 1366 h_sync: 1436 h_sync_end 1579
> h_blank_end 1792 h_border: 0
> [ 93.094] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 774
> v_blanking: 798 v_border: 0
> [ 93.094] (II) modeset(0): Serial No: UK51441021518
> [ 93.094] (II) modeset(0): Monitor name: Philips 166VL
> [ 93.094] (II) modeset(0): Ranges: V min: 56 V max: 63 Hz, H min: 30 H
> max: 60 kHz, PixClock max 86 MHz
> [ 93.094] (II) modeset(0): EDID (in hex):
> [ 93.094] (II) modeset(0): 00ffffffffffff00410c7ec00e540000
> [ 93.094] (II) modeset(0): 291801036e2213782a554da3554a9727
> [ 93.094] (II) modeset(0): 154f54a1080001010101010101010101
> [ 93.094] (II) modeset(0): 010101010101662156aa51001e30468f
> [ 93.094] (II) modeset(0): 330058c21000001e000000ff00554b35
> [ 93.094] (II) modeset(0): 31343431303231353138000000fc0050
> [ 93.094] (II) modeset(0): 68696c69707320313636564c000000fd
> [ 93.095] (II) modeset(0): 00383f1e3c08000a2020202020200063
> [ 93.095] (II) modeset(0): Printing probed modes for output VGA-1
> [ 93.095] (II) modeset(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579
> 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
> [ 93.095] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
> 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
> [ 93.095] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968
> 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
> [ 93.095] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752
> 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
> [ 93.095] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846
> 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
> [ 93.096] (II) modeset(0): EDID for output HDMI-1
> [ 93.096] (II) modeset(0): EDID for output DP-1
> [ 93.096] (II) modeset(0): Output VGA-1 connected
> [ 93.096] (II) modeset(0): Output HDMI-1 disconnected
> [ 93.096] (II) modeset(0): Output DP-1 disconnected
> [ 93.096] (II) modeset(0): Using exact sizes for initial modes
> [ 93.096] (II) modeset(0): Output VGA-1 using initial mode 1366x768 +0+0
> [ 93.097] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 93.097] (==) modeset(0): DPI set to (96, 96)
> [ 93.097] (II) Loading sub module "fb"
> [ 93.097] (II) LoadModule: "fb"
> [ 93.097] (II) Module "fb" already built-in
> [ 93.097] (II) UnloadModule: "scfb"
> [ 93.097] (II) Unloading scfb
> [ 93.097] (II) UnloadModule: "vesa"
> [ 93.097] (II) Unloading vesa
> [ 93.122] (EE)
> Fatal server error:
> [ 93.122] (EE) Caught signal 6 (Abort trap). Server aborting
> [ 93.122] (EE)
> [ 93.122] (EE)
> Please consult the The X.Org Foundation support
> at http://wiki.x.org
> for help.
> [ 93.122] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
> additional information.
> [ 93.122] (EE)
> [ 93.123] (EE) Server terminated with error (1). Closing log file.
>
>
>
--
Chris Hill chris@monochrome.org