Boot failure after shutdown -r now

Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: Budi Janto <budijanto_at_studiokaraoke.co.id>
Date: Wed, 06 Oct 2021 03:39:41 UTC
Hallo folks,

Last night, I decide to restart my server but something was happened, I 
failed to SSH my box. Here, I describe a bit information.

# uname -srmK
FreeBSD 13.0-RELEASE-p4 amd64 1300139

# df -h
Filesystem     Size    Used   Avail Capacity  Mounted on
/dev/ada0p2    222G    3.7G    200G     2%    /
devfs          1.0K    1.0K      0B   100%    /dev
/dev/ada0p1    256M    1.7M    254M     1%    /boot/efi

# dmesg
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021
 
root@amd64-builder.daemonology.net:/usr/obj/usr/src/amd64.amd64/sys/GENERIC 
amd64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git 
llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 800x600
CPU: Intel(R) Xeon(R) CPU E3-1220 v3 @ 3.10GHz (3092.91-MHz K8-class CPU)
   Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
   AMD Features2=0x21<LAHF,ABM>
   Structured Extended 
Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
   XSAVE Features=0x1<XSAVEOPT>
   VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
   TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16551342080 (15784 MB)
--- cut ---

# smartctl -i /dev/ada0
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Samsung SSD 870 EVO 250GB
Serial Number:    S6P2NF0R556085D
LU WWN Device Id: 5 002538 f4158216f
Firmware Version: SVT01B6Q
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Oct  6 10:31:53 2021 WIB
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

I try to capture boot failure through photo from remote worker (I attach 
too for more clear).

--- cut ---
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Start @ 0xffffffff8037c000 ...
EFI framebuffer information:
addr, size      0xb2000000, 0x7f0000
dimensions      800 x 600
stride          800
masks           0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000

Anyone can give me some clue with this problem? because this situation 
not always does -- Thank you.


-- 
Regards,
Budi Janto