New Port: Security/liblurch & Security/Pidgin-lurch

Reply: Ronald Klop : "Re: New Port: Security/liblurch & Security/Pidgin-lurch"
Reply: Felix Palmen : "Re: New Port: Security/liblurch & Security/Pidgin-lurch"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: Michael A. Oshin <micadeyeye_at_gmail.com>
Date: Sat, 27 Aug 2022 05:20:07 UTC
Thanks Ronald and other folks,
It now builds and deploys into the right dir. I needed to get rid of the
LD_CONFIG too.
See the makefile at
https://github.com/micadeyeye/freebsd-ports/blob/master/security/liblurch/Makefile
.

1) However, how do I get rid of the below error?
---------
===>   Generating temporary packing list
.....
......
====> Compressing man pages (compress-man)
===>  Installing for liblurch-0.7.0
===>  Checking if liblurch is already installed
usage: cp [-R [-H | -L | -P]] [-f | -i | -n] [-alpsvx] source_file
target_file
       cp [-R [-H | -L | -P]] [-f | -i | -n] [-alpsvx] source_file ...
target_directory
*** Error code 64

Stop.
make: stopped in /usr/ports/security/liblurch/
-------

2) Next, try use the GH repo (Preferred) and you will see the below error:
----------
===>  Building for liblurch-0.7.0
gmake[1]: Entering directory
'......ports/security/liblurch/work/lurch-84f72d8'
cc -fPIC -O2 -pipe  -fstack-protector-strong -fno-strict-aliasing  -std=c11
-Wall -g -Wstrict-overflow -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include
 -I/usr/local/include/libpurple -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include
 -I/usr/local/include/libxml2 -I./headers/jabber -I./lib/libomemo/src
-I./lib/axc/src -I./lib/axc/lib/libsignal-protocol-c/src
-D_XOPEN_SOURCE=700 -D_BSD_SOURCE -D_DEFAULT_SOURCE -DPURPLE_PLUGINS -c
./src/lurch.c -o build/lurch.o
./src/lurch.c:14:10: fatal error: 'libomemo.h' file not found
#include "libomemo.h"
         ^~~~~~~~~~~~
1 error generated.
gmake[1]: *** [Makefile:148: build/lurch.o] Error 1
------
--------------

I have tried several options - e.g. SUB_FILES=
 ${WRKSRC}/lib/libomemo/ - but no luck.How else can I get it built? I think
the do-install throws error too for GH.

On a final note, what other steps do I need to do to finalise and publish
into ports? I have read the pages but need quicker porting.

Michael

On Fri, Aug 26, 2022, 16:12 Ronald Klop <ronald-lists@klop.ws> wrote:

> Mmm, lets take another look at it.
>
> From /usr/ports/Mk/bsd.ports.mk:
>
> "# Set these variables if your port doesn't need some of the steps.
> # Note that there are no NO_PATCH or NO_CONFIGURE variables because
> # those steps are empty by default.  NO_EXTRACT is not allowed anymore
> # since we need to at least create ${WRKDIR}.  Also, NO_CHECKSUM is a user
> # variable and is not to be set in a port's Makefile.  See above for
> NO_PACKAGE.
> #
> # NO_BUILD      - Use a dummy (do-nothing) build target.
> # NO_INSTALL    - Use a dummy (do-nothing) install target.
> # NO_TEST       - Use a dummy (do-nothing) test target."
>
> Oh, lets take a look at your Makefile.
> You have "GNU_CONFIGURE= yes" defined. That is why it tries to run
> configure.
> Remove that line and try again.
>
> See also the link I posted in the previous reply:
> "If HAS_CONFIGURE or GNU_CONFIGURE is set, WRKSRC/configure is run."
>
> Regards,
> Ronald.
>
>
>
> *Van:* "Michael A. Oshin" <micadeyeye@gmail.com>
> *Datum:* vrijdag, 26 augustus 2022 08:55
> *Aan:* Ronald Klop <ronald-lists@klop.ws>
> *Onderwerp:* Re: Fwd: New Port: Security/liblurch & Security/Pidgin-lurch
>
> HAS_CONFIGURE=off in Makefile did not work. A blank configure file in dir
> did not either. I have not seen one in pkg dirs though.
>
> On Fri, 26 Aug 2022 at 13:19, Ronald Klop <ronald-lists@klop.ws> wrote:
>
>> Does this work?
>>
>> HAS_CONFIGURE=off
>>
>> https://docs.freebsd.org/en/books/porters-handbook/slow-porting/#slow-work
>>
>>
>> *Van:* "Michael A. Oshin" <micadeyeye@gmail.com>
>> *Datum:* 26 augustus 2022 05:37
>> *Aan:* freebsd-ports@freebsd.org
>> *Onderwerp:* Fwd: New Port: Security/liblurch & Security/Pidgin-lurch
>>
>> Good Morning folks,
>>
>> I made a few changes to the liblurch Makefile. It now points to the
>> developer's github for the pkg. See
>> https://github.com/micadeyeye/freebsd-ports/blob/master/security/liblurch/Makefile
>> .
>>
>> One problem I have with the liblurch is that it wants to run
>> '.configure'. See the below:
>>
>> ______________________
>> make -C /usr/local/opt/github/freebsd-ports/security/liblurch/ install
>> clean
>> ===>   liblurch-0.7.0 depends on package: gmake>=4.3 - found
>> ===>   liblurch-0.7.0 depends on package: pkgconf>=1.3.0_1 - found
>> ===>   liblurch-0.7.0 depends on file: /usr/local/bin/ccache - found
>> ===>   liblurch-0.7.0 depends on shared library: libmxml.so - found
>> (/usr/local/lib/libmxml.so)
>> ===>   liblurch-0.7.0 depends on shared library: libpurple.so - found
>> (/usr/local/lib/libpurple.so)
>> ===>  Configuring for liblurch-0.7.0
>> env: ./configure: No such file or directory
>> ===>  Script "configure" failed unexpectedly.
>> Please report the problem to micadeyeye@gmail.com [maintainer] and
>> attach the
>>
>> "/usr/local/opt/github/freebsd-ports/security/liblurch/work/lurch-0.7.0-src/config.log"
>> including the output of the failure of your make command. Also, it might
>> be
>> a good idea to provide an overview of all packages installed on your
>> system
>> (e.g. a /usr/local/sbin/pkg-static info -g -Ea).
>> *** Error code 1
>>
>> Stop.
>> make: stopped in /usr/local/opt/github/freebsd-ports/security/liblurch/
>> _________________________________
>>
>> What it should do is ONLY run 'gmake install'. Please show me how to
>> replace the process  "===>  Configuring for liblurch-0.7.0
>> env: ./configure: No such file or directory" with the "gmake install".
>>
>> On the other hand, please note that the pidgin-lurch (
>> https://github.com/micadeyeye/freebsd-ports/blob/master/security/pidgin-lurch/Makefile)
>> is the UI modification to Pidgin, and currently, I have only copied the OTR
>> UI with no modifications yet to its source code. I need a lot of assistance
>> here.
>>
>>
>>
>>
>>
>