From nobody Sat Jan 22 13:43:34 2022 X-Original-To: pkg-fallout@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 670CB1985EDD for ; Sat, 22 Jan 2022 13:43:35 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from mxrelay.nyi.freebsd.org (mxrelay.nyi.freebsd.org [IPv6:2610:1c1:1:606c::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.nyi.freebsd.org", Issuer "R3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4JgyBb11h2z4pbf for ; Sat, 22 Jan 2022 13:43:35 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from beefy12.nyi.freebsd.org (beefy12.nyi.freebsd.org [IPv6:2610:1c1:1:6080::16:1b]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by mxrelay.nyi.freebsd.org (Postfix) with ESMTPS id 02ED310365 for ; Sat, 22 Jan 2022 13:43:35 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from beefy12.nyi.freebsd.org (localhost [127.0.0.1]) by beefy12.nyi.freebsd.org (8.16.1/8.16.1) with ESMTP id 20MDhYVk084351 for ; Sat, 22 Jan 2022 13:43:34 GMT (envelope-from pkg-fallout@FreeBSD.org) Received: (from root@localhost) by beefy12.nyi.freebsd.org (8.16.1/8.16.1/Submit) id 20MDhYcu084350; Sat, 22 Jan 2022 13:43:34 GMT (envelope-from pkg-fallout@FreeBSD.org) Date: Sat, 22 Jan 2022 13:43:34 GMT From: pkg-fallout@FreeBSD.org Message-Id: <202201221343.20MDhYcu084350@beefy12.nyi.freebsd.org> To: pkg-fallout@FreeBSD.org Subject: [package - 130releng-armv7-quarterly][devel/bullet] Failed for bullet-3.21_1 in build ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org; s=dkim; t=1642859015; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc; bh=Ae+i72pSAF08D4tDd2Am81d1rbYCdwwPIKx+VyCNSMc=; b=QMIYWxm5F/9LV7urfN6KnTVC70DSP/+YTwPP9OpGYD07OPlUVYzjLoeyY35hb3uSQXjRR/ Ao6PmlgQiKlB22BGzpH8ZTSuCjZ3xFrus1PEEKeTgVdTSVMkooVjwECit58k7D07SwnjXU VVj36EL5W1XPqDbOPeuQahO8WqZ2/azfqOvvTNUV1rIyg1HDKMyZYZ3p77yu+qoww4CvJM nqo2uVmIk5JbRUERWhbE1se5S/VSq58wFllhbn4vtY4rA8N58LgbkGBUw5kFbwj+ea95LF U/KaRB16SHDtQzQbkuTYpvjLVQUAoqqxYrHZuS2ecs6OFqRccOCwrTW/DEfLoQ== ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1642859015; a=rsa-sha256; cv=none; b=UjyXAQe+NNkKM6wfq4KPDip5AaiI1ISJv3Gr1F3WsZnPz2J79KUsaz5uwGhjh6AxGNYDCb U7OonpWziW9QvzVelhgkVrQuE05cca4I6oOO3HNl0wcwHc53rRMeiGCbShhME56YKhfYXq 9lcx4UlHFt2udEJmWDJdRz9TJ0AQt0RaKscPGtGtD81ddhIC+q8+9lRbZF+mBY09L6cUiu 614XX+WHWm265Xv77ShMUzvdCiXigv4xFO4qSY+jHIHyWAFS2wzp2Py7ufSTlL2DMu1HrU b5hUViCvTgs/PQUne8jrL+24bQU/rnkpSLo2076qQlvRmjsJJqa7T49gIb3VwA== ARC-Authentication-Results: i=1; mx1.freebsd.org; none X-ThisMailContainsUnwantedMimeParts: N List-Id: Fallout logs from package building List-Archive: https://lists.freebsd.org/archives/freebsd-pkg-fallout List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-pkg-fallout@freebsd.org You are receiving this mail as a port that you maintain is failing to build on the FreeBSD package build server. Please investigate the failure and submit a PR to fix build. Maintainer: fluffy@FreeBSD.org Log URL: http://beefy12.nyi.freebsd.org/data/130releng-armv7-quarterly/8619a4a38311/logs/bullet-3.21_1.log Build URL: http://beefy12.nyi.freebsd.org/build.html?mastername=130releng-armv7-quarterly&build=8619a4a38311 Log: =>> Building devel/bullet build started at Sat Jan 22 13:42:38 UTC 2022 port directory: /usr/ports/devel/bullet package name: bullet-3.21_1 building for: FreeBSD 130releng-armv7-quarterly-job-10 13.0-RELEASE-p6 FreeBSD 13.0-RELEASE-p6 1300139 arm maintained by: fluffy@FreeBSD.org Makefile ident: Poudriere version: 3.2.8-21-g883afb07 Host OSVERSION: 1400003 Jail OSVERSION: 1300139 Job Id: 10 ---Begin Environment--- SHELL=/bin/csh UNAME_p=armv7 UNAME_m=arm ABI_FILE=/usr/lib/crt1.o OSVERSION=1300139 UNAME_v=FreeBSD 13.0-RELEASE-p6 1300139 UNAME_r=13.0-RELEASE-p6 BLOCKSIZE=K MAIL=/var/mail/root MM_CHARSET=UTF-8 LANG=C.UTF-8 STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin LOCALBASE=/usr/local QEMU_EMULATING=1 USER=root LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.2.8-21-g883afb07 MASTERMNT=/usr/local/poudriere/data/.m/130releng-armv7-quarterly/ref POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM= PWD=/usr/local/poudriere/data/.m/130releng-armv7-quarterly/ref/.p/pool P_PORTS_FEATURES=FLAVORS SELECTED_OPTIONS MASTERNAME=130releng-armv7-quarterly SCRIPTPREFIX=/usr/local/share/poudriere OLDPWD=/usr/local/poudriere/data/.m/130releng-armv7-quarterly/ref/.p SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR=single DEPENDS_ARGS= MAKE_ARGS= FLAVOR=single ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ===> The following configuration options are available for bullet-3.21_1: DOCS=on: Build and/or install documentation ===> Use 'make config' to modify these settings ---End OPTIONS List--- --MAINTAINER-- fluffy@FreeBSD.org --End MAINTAINER-- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CACHE_HOME=/wrkdirs/usr/ports/devel/bullet/work-single/.cache HOME=/wrkdirs/usr/ports/devel/bullet/work-single TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/devel/bullet/work-single/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh --End CONFIGURE_ENV-- --MAKE_ENV-- NINJA_STATUS="[%p %s/%t] " XDG_DATA_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CACHE_HOME=/wrkdirs/usr/ports/devel/bullet/work-single/.cache HOME=/wrkdirs/usr/ports/devel/bullet/work-single TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/devel/bullet/work-single/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES DESTDIR=/wrkdirs/usr/ports/devel/bullet/work-single/stage PREFIX=/usr/local LOCALBASE=/usr/local CC="/nxb-bin/usr/bin/cc" CFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " CPP="/nxb-bin/usr/bin/cpp" CPPFLAGS="" LDFLAGS=" -fstack-protector-strong " LIBS="" CXX="/nxb-bin/usr/bin/c++" CXXFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD _INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- LIB_VERSION=3.20 PORTDOCS="" CMAKE_BUILD_TYPE="release" OSREL=13.0 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib DOCSDIR="share/doc/bullet" EXAMPLESDIR="share/examples/bullet" DATADIR="share/bullet" WWWDIR="www/bullet" ETCDIR="etc/bullet" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/bullet DOCSDIR=/usr/local/share/doc/bullet EXAMPLESDIR=/usr/local/share/examples/bullet WWWDIR=/usr/local/www/bullet ETCDIR=/usr/local/etc/bullet --End SUB_LIST-- ---Begin make.conf--- .sinclude "/etc/make.nxb.conf" USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes MACHINE=arm MACHINE_ARCH=armv7 ARCH=${MACHINE_ARCH} #### /usr/local/etc/poudriere.d/make.conf #### # XXX: We really need this but cannot use it while 'make checksum' does not # try the next mirror on checksum failure. It currently retries the same # failed mirror and then fails rather then trying another. It *does* # try the next if the size is mismatched though. #MASTER_SITE_FREEBSD=yes # Build ALLOW_MAKE_JOBS_PACKAGES with 2 jobs MAKE_JOBS_NUMBER=2 #### /usr/ports/Mk/Scripts/ports_env.sh #### _CCVERSION_9d218390=FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) Target: armv7-unknown-freebsd13.0-gnueabihf Thread model: posix InstalledDir: /nxb-bin/usr/bin _ALTCCVERSION_9d218390=none _CXXINTERNAL_9c45a5b1=FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) Target: armv7-unknown-freebsd13.0-gnueabihf Thread model: posix InstalledDir: /nxb-bin/usr/bin "/nxb-bin/usr/bin/ld" "--eh-frame-hdr" "-dynamic-linker" "/libexec/ld-elf.so.1" "--hash-style=both" "--enable-new-dtags" "-o" "a.out" "/usr/lib/crt1.o" "/usr/lib/crti.o" "/usr/lib/crtbegin.o" "-L/usr/lib" "/dev/null" "-lc++" "-lm" "-lgcc" "--as-needed" "-lgcc_s" "--no-as-needed" "-lc" "-lgcc" "--as-needed" "-lgcc_s" "--no-as-needed" "/usr/lib/crtend.o" "/usr/lib/crtn.o" CC_OUTPUT_9d218390_58173849=yes CC_OUTPUT_9d218390_9bdba57c=yes CC_OUTPUT_9d218390_6a4fe7f5=yes CC_OUTPUT_9d218390_6bcac02b=yes CC_OUTPUT_9d218390_67d20829=yes CC_OUTPUT_9d218390_bfa62e83=yes CC_OUTPUT_9d218390_f0b4d593=yes CC_OUTPUT_9d218390_308abb44=yes CC_OUTPUT_9d218390_f00456e5=yes CC_OUTPUT_9d218390_65ad290d=yes CC_OUTPUT_9d218390_f2776b26=yes CC_OUTPUT_9d218390_b2657cc3=yes CC_OUTPUT_9d218390_380987f7=yes CC_OUTPUT_9d218390_160933ec=yes CC_OUTPUT_9d218390_fb62803b=yes _OBJC_CCVERSION_9d218390=FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) Target: armv7-unknown-freebsd13.0-gnueabihf Thread model: posix InstalledDir: /nxb-bin/usr/bin _OBJC_ALTCCVERSION_9d218390=none ARCH=armv7 OPSYS=FreeBSD _OSRELEASE=13.0-RELEASE-p6 OSREL=13.0 OSVERSION=1300139 PYTHONBASE=/usr/local CONFIGURE_MAX_CMD_LEN=524288 HAVE_PORTS_ENV=1 #### Misc Poudriere #### GID=0 UID=0 DISABLE_MAKE_JOBS=poudriere ---End make.conf--- ---Begin make.nxb.conf--- CC=/nxb-bin/usr/bin/cc CPP=/nxb-bin/usr/bin/cpp CXX=/nxb-bin/usr/bin/c++ NM=/nxb-bin/usr/bin/nm LD=/nxb-bin/usr/bin/ld OBJCOPY=/nxb-bin/usr/bin/objcopy SIZE=/nxb-bin/usr/bin/size STRIPBIN=/nxb-bin/usr/bin/strip SED=/nxb-bin/usr/bin/sed RANLIB=/nxb-bin/usr/bin/ranlib YACC=/nxb-bin/usr/bin/yacc MAKE=/nxb-bin/usr/bin/make STRINGS=/nxb-bin/usr/bin/strings AWK=/nxb-bin/usr/bin/awk FLEX=/nxb-bin/usr/bin/flex ---End make.nxb.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 33554432 stack size (kbytes, -s) 524288 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 1024 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== ===> License ZLIB accepted by the user =========================================================================== =================================================== ===> bullet-3.21_1 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.17.5.pkg [130releng-armv7-quarterly-job-10] Installing pkg-1.17.5... [130releng-armv7-quarterly-job-10] Extracting pkg-1.17.5: .......... done ===> bullet-3.21_1 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of bullet-3.21_1 =========================================================================== =================================================== =========================================================================== =================================================== ===> License ZLIB accepted by the user => bulletphysics-bullet3-3.21_GH0.tar.gz doesn't seem to exist in /portdistfiles/. => Attempting to fetch https://codeload.github.com/bulletphysics/bullet3/tar.gz/3.21?dummy=/bulletphysics-bullet3-3.21_GH0.tar.gz fetch: https://codeload.github.com/bulletphysics/bullet3/tar.gz/3.21?dummy=/bulletphysics-bullet3-3.21_GH0.tar.gz: size unknown fetch: https://codeload.github.com/bulletphysics/bullet3/tar.gz/3.21?dummy=/bulletphysics-bullet3-3.21_GH0.tar.gz: size of remote file is not known bulletphysics-bullet3-3.21_GH0.tar.gz 126 MB 7557 kBps 17s ===> Fetching all distfiles required by bullet-3.21_1 for building =========================================================================== =================================================== ===> License ZLIB accepted by the user ===> Fetching all distfiles required by bullet-3.21_1 for building => SHA256 Checksum OK for bulletphysics-bullet3-3.21_GH0.tar.gz. =========================================================================== [130releng-armv7-quarterly-job-10] | | `-- Installing indexinfo-0.3.1... [130releng-armv7-quarterly-job-10] | | `-- Extracting indexinfo-0.3.1: .... done [130releng-armv7-quarterly-job-10] | `-- Extracting gettext-runtime-0.21: .......... done [130releng-armv7-quarterly-job-10] `-- Extracting rhash-1.4.2: .......... done [130releng-armv7-quarterly-job-10] Extracting cmake-3.22.1: .......... done ===== Message from ca_root_nss-3.71: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem ===> bullet-3.21_1 depends on file: /usr/local/bin/cmake - found ===> Returning to build of bullet-3.21_1 ===> bullet-3.21_1 depends on executable: ninja - not found ===> Installing existing package /packages/All/ninja-1.10.2,2.pkg [130releng-armv7-quarterly-job-10] Installing ninja-1.10.2,2... [130releng-armv7-quarterly-job-10] `-- Installing python38-3.8.12_1... [130releng-armv7-quarterly-job-10] | `-- Installing libffi-3.3_1... [130releng-armv7-quarterly-job-10] | `-- Extracting libffi-3.3_1: .......... done [130releng-armv7-quarterly-job-10] | `-- Installing mpdecimal-2.5.1... [130releng-armv7-quarterly-job-10] | `-- Extracting mpdecimal-2.5.1: .......... done [130releng-armv7-quarterly-job-10] | `-- Installing readline-8.1.1... [130releng-armv7-quarterly-job-10] | `-- Extracting readline-8.1.1: .......... done [130releng-armv7-quarterly-job-10] `-- Extracting python38-3.8.12_1: .......... done [130releng-armv7-quarterly-job-10] Extracting ninja-1.10.2,2: ........ done ===== Message from python38-3.8.12_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py38-gdbm databases/py-gdbm@py38 py38-sqlite3 databases/py-sqlite3@py38 py38-tkinter x11-toolkits/py-tkinter@py38 ===> bullet-3.21_1 depends on executable: ninja - found ===> Returning to build of bullet-3.21_1 ===> bullet-3.21_1 depends on package: xorgproto>=0 - not found ===> Installing existing package /packages/All/xorgproto-2021.5.pkg [130releng-armv7-quarterly-job-10] Installing xorgproto-2021.5... [130releng-armv7-quarterly-job-10] Extracting xorgproto-2021.5: .......... done ===> bullet-3.21_1 depends on package: xorgproto>=0 - found ===> Returning to build of bullet-3.21_1 ===> bullet-3.21_1 depends on package: xorgproto>=0 - found ===> bullet-3.21_1 depends on file: /usr/local/libdata/pkgconfig/x11.pc - not found ===> Installing existing package /packages/All/libX11-1.7.2,1.pkg [130releng-armv7-quarterly-job-10] Installing libX11-1.7.2,1... [130releng-armv7-quarterly-job-10] `-- Installing libxcb-1.14_1... [130releng-armv7-quarterly-job-10] | `-- Installing libXau-1.0.9... [130releng-armv7-quarterly-job-10] | `-- Extracting libXau-1.0.9: .......... done [130releng-armv7-quarterly-job-10] | `-- Installing libXdmcp-1.1.3... [130releng-armv7-quarterly-job-10] | `-- Extracting libXdmcp-1.1.3: ......... done [130releng-armv7-quarterly-job-10] | `-- Installing libpthread-stubs-0.4... [130releng-armv7-quarterly-job-10] | `-- Extracting libpthread-stubs-0.4: .... done [130releng-armv7-quarterly-job-10] `-- Extracting libxcb-1.14_1: .......... done [130releng-armv7-quarterly-job-10] Extracting libX11-1.7.2,1: .......... done ===> bullet-3.21_1 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> Returning to build of bullet-3.21_1 =========================================================================== =================================================== ===> bullet-3.21_1 depends on shared library: libGL.so - not found ===> Installing existing package /packages/All/libglvnd-1.4.0.pkg [130releng-armv7-quarterly-job-10] Installing libglvnd-1.4.0... [130releng-armv7-quarterly-job-10] `-- Installing libXext-1.3.4,1... [130releng-armv7-quarterly-job-10] `-- Extracting libXext-1.3.4,1: .......... done [130releng-armv7-quarterly-job-10] Extracting libglvnd-1.4.0: .......... done ===> bullet-3.21_1 depends on shared library: libGL.so - found (/usr/local/lib/libGL.so) ===> Returning to build of bullet-3.21_1 ===> bullet-3.21_1 depends on shared library: libGLU.so - not found ===> Installing existing package /packages/All/libGLU-9.0.2_1.pkg [130releng-armv7-quarterly-job-10] Installing libGLU-9.0.2_1... [130releng-armv7-quarterly-job-10] Extracting libGLU-9.0.2_1: ..... done ===> bullet-3.21_1 depends on shared library: libGLU.so - found (/usr/local/lib/libGLU.so) ===> Returning to build of bullet-3.21_1 ===> bullet-3.21_1 depends on shared library: libglut.so - not found ===> Installing existing package /packages/All/freeglut-3.2.1.pkg [130releng-armv7-quarterly-job-10] Installing freeglut-3.2.1... [130releng-armv7-quarterly-job-10] `-- Installing libICE-1.0.10,1... [130releng-armv7-quarterly-job-10] `-- Extracting libICE-1.0.10,1: .......... done [130releng-armv7-quarterly-job-10] `-- Installing libXi-1.8,1... [130releng-armv7-quarterly-job-10] | `-- Installing libXfixes-6.0.0... [130releng-armv7-quarterly-job-10] | `-- Extracting libXfixes-6.0.0: .......... done [130releng-armv7-quarterly-job-10] `-- Extracting libXi-1.8,1: .......... done [130releng-armv7-quarterly-job-10] `-- Installing libXrandr-1.5.2... [130releng-armv7-quarterly-job-10] | `-- Installing libXrender-0.9.10_2... [130releng-armv7-quarterly-job-10] | `-- Extracting libXrender-0.9.10_2: .......... done [130releng-armv7-quarterly-job-10] `-- Extracting libXrandr-1.5.2: .......... done [130releng-armv7-quarterly-job-10] `-- Installing libXxf86vm-1.1.4_3... [130releng-armv7-quarterly-job-10] `-- Extracting libXxf86vm-1.1.4_3: .......... done [130releng-armv7-quarterly-job-10] Extracting freeglut-3.2.1: .......... done ===== Message from freeglut-3.2.1: -- Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. ===> bullet-3.21_1 depends on shared library: libglut.so - found (/usr/local/lib/libglut.so) ===> Returning to build of bullet-3.21_1 =========================================================================== =================================================== ===> Configuring for bullet-3.21_1 ===> Performing out-of-source build /bin/mkdir -p /wrkdirs/usr/ports/devel/bullet/work-single/.build CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required): Compatibility with CMake < 2.8.12 will be removed from a future version of CMake. Update the VERSION argument value or use a ... suffix to tell CMake that the project does not need compatibility with older versions. -- The C compiler identification is Clang 11.0.1 -- The CXX compiler identification is Clang 11.0.1 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /nxb-bin/usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /nxb-bin/usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done BSD? -- Looking for pthread.h -- Looking for pthread.h - found -- Found Threads: TRUE CMake Warning (dev) at /usr/local/share/cmake/Modules/FindOpenGL.cmake:315 (message): Policy CMP0072 is not set: FindOpenGL prefers GLVND by default when available. Run "cmake --help-policy CMP0072" for policy details. Use the cmake_policy command to set the policy and suppress this warning. FindOpenGL found both a legacy GL library: OPENGL_gl_LIBRARY: /usr/local/lib/libGL.so and GLVND libraries for OpenGL and GLX: OPENGL_opengl_LIBRARY: /usr/local/lib/libOpenGL.so OPENGL_glx_LIBRARY: /usr/local/lib/libGLX.so OpenGL_GL_PREFERENCE has not been set to "GLVND" or "LEGACY", so for compatibility with CMake 3.10 and below the legacy GL library will be used. Call Stack (most recent call first): CMakeLists.txt:312 (FIND_PACKAGE) This warning is for project developers. Use -Wno-dev to suppress it. -- Found OpenGL: /usr/local/lib/libOpenGL.so OPENGL FOUND /usr/local/lib/libGL.so/usr/local/lib/libGLU.so -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_BULLET3_DEMOS BUILD_CPU_DEMOS CMAKE_COLOR_MAKEFILE CMAKE_C_FLAGS_DEBUG CMAKE_MODULE_LINKER_FLAGS CMAKE_VERBOSE_MAKEFILE ENABLE_VHACD -- Build files have been written to: /wrkdirs/usr/ports/devel/bullet/work-single/.build =========================================================================== =================================================== ===> Building for bullet-3.21_1 [ 0% 1/303] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DBullet3Common_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.21/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o -MF src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o.d -o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.21/src/Bullet3Common/b3AlignedAllocator.cpp [ 0% 2/303] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DBullet3Common_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.21/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o -MF src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o.d -o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.21/src/Bullet3Common/b3Vector3.cpp [ 0% 3/303] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DBullet3Common_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.21/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -MF src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o.d -o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.21/src/Bullet3Common/b3Logging.cpp [ 1% 4/303] : && /nxb-bin/usr/bin/c++ -fPIC -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fstack-protector-strong -shared -Wl,-soname,libBullet3Common.so.3.20 -o src/Bullet3Common/libBullet3Common.so.3.20 src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -pthread && : FAILED: src/Bullet3Common/libBullet3Common.so.3.20 : && /nxb-bin/usr/bin/c++ -fPIC -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fstack-protector-strong -shared -Wl,-soname,libBullet3Common.so.3.20 -o src/Bullet3Common/libBullet3Common.so.3.20 src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -pthread && : ld: error: unable to find library -lomp c++: error: linker command failed with exit code 1 (use -v to see invocation) ninja: build stopped: subcommand failed. *** Error code 1 Stop. make: stopped in /usr/ports/devel/bullet