Re: VirtIO Net Tuning

On Wed, Mar 25, 2026 at 10:54 AM Michael Tuexen <tuexen@freebsd.org> wrote:

> > On 25. Mar 2026, at 15:06, Mark Saad <nonesuch@longcount.org> wrote:
> >
> > Hello All
> >   I have been playing with FreeBSD 14.3-RELEASE and 15.0-REELASE amd64
> qemu powered vms on a Linux cloud hosting setup. I have noticed that with
> VirtIO net ( vtnet ) interfaces there is some sort of tuning required , or
> there is some sort of limitation on the packets per second and overall
> throughput the nics can push.  I am not able to get any one interface to
> push more then 6Gb/s bursts and 5.5Gb/s sustained. Before I go off the deep
> end with details has anyone run into this , is this a known issue ?
> Hi Mark,
>
> as indicated by Mike, there has been a lot of improvements to vtnet in
> 14.4 and 15.0
> such that no special tuning is required.
> If you find that some tuning is necessary to improve things, I would like
> to know,
> since this is not intended.
> I am not saying that the vtnet driver can't be improved, only that the
> default
> settings should not need tweaking.
>
> Best regards
> Michael
> >
> > --
> > mark saad | nonesuch@longcount.org
>
>
Mike / Michael
  I just tried FreeBSD 14.4 and saw the same results . The simple test is
this.
Two VMS in the same network . Each VM has 14.4-RELEASE from using the IMAGE
.
Each VM has 8 cores 16G ram , one vtnet nic and some disk.

fish 10.240.65.6 sending to bird 10.240.65.7.

root@fish:~ # iperf3 -c 10.240.65.7 -p 8080
Connecting to host 10.240.65.7, port 8080
[  5] local 10.240.65.8 port 10106 connected to 10.240.65.7 port 8080
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.06   sec   386 MBytes  3.04 Gbits/sec    0   1.20 MBytes

[  5]   1.06-2.04   sec   368 MBytes  3.17 Gbits/sec    0   2.29 MBytes

[  5]   2.04-3.05   sec   394 MBytes  3.26 Gbits/sec    0   3.44 MBytes

[  5]   3.05-4.01   sec   359 MBytes  3.14 Gbits/sec    0   3.92 MBytes

[  5]   4.01-5.04   sec   395 MBytes  3.22 Gbits/sec    0   3.92 MBytes

[  5]   5.04-6.04   sec   342 MBytes  2.86 Gbits/sec    0   3.92 MBytes

[  5]   6.04-7.06   sec   426 MBytes  3.48 Gbits/sec    0   3.92 MBytes

[  5]   7.06-8.02   sec   369 MBytes  3.25 Gbits/sec    0   3.92 MBytes

[  5]   8.02-9.04   sec   422 MBytes  3.46 Gbits/sec    0   3.92 MBytes

[  5]   9.04-10.02  sec   244 MBytes  2.08 Gbits/sec    0   3.92 MBytes

- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.02  sec  3.62 GBytes  3.10 Gbits/sec    0            sender
[  5]   0.00-10.02  sec  3.61 GBytes  3.10 Gbits/sec
 receiver

iperf Done.
root@fish:~ #

Running 15.0-RELEASE was not much of a difference.


-- 
mark saad | nonesuch@longcount.org