Re: VPP on FreeBSD Stable 14.3
- Reply: Tom Jones: "Re: VPP on FreeBSD Stable 14.3"
- Reply: Cheng Cui : "Re: VPP on FreeBSD Stable 14.3"
- In reply to: Cheng Cui : "Re: VPP on FreeBSD Stable 14.3"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Thu, 02 Oct 2025 12:43:55 UTC
Hi folks, I cant use the Bhyve Hypervisor just yet but I would like to use Freebsd as a VPP Guest on Proxmox, I think perhaps the the missing /etc/vpp/startup.conf with sensible defaults for small vms might help, Ill do some testing and see how I geton, the concern I would have is that a new user of FreeBSD with VPP I can say the install process is more simple which is nice, but the consumption of all resources of the vm might need to be curtailed so allow vpp to run on (Number of Cores -1) so there is resources available for normal FreeBSD stuff, Ill feed back more information as I get it ... Tom Smyth On Thu, 2 Oct 2025 at 11:42, Cheng Cui <cc@freebsd.org> wrote: > > Hi Tom, > > May be you can try Bhyve based VM? > > The last time I attempted VPP in my own Bhyve based FreeBSD VM, logged in this wiki, I remember only ping worked. Plus some compile issues. > > Maybe Tom Jones can also help. > > On Sep 27, 2025, at 10:40, Tom Smyth <tom.smyth@wirelessconnect.eu> wrote: > > Folks, > I was wondering folks who run vpp on FreeBSD, > 1) when I run vpp ssh on the management nic becomes un responsive... > 2) is there a recommended freeBSD /etc/vpp/startup.conf file that > works well for FreeBSD ? > > i have a virtio NIC for management > > Im trying out FreeBSD with VPP inside a PRoxmox Hosted VM with Intel > IOMMU (not virtio-iommu) 8GB RAM 2 sockets 1 core, assigned to the > VM, > > > my /boot/loader.conf > cat /boot/loader.conf > boot_multicons=YES > boot_serial=YES > comconsole_speed=115200 > console="comconsole,vidconsole" > contigmem_load="YES" > nic_uio_load="YES" > hw.contigmem.num_buffers=4 > hw.contigmem.buffer_size=1073741824 > hw.nic_uio.bdfs="1:0:0,2:0:0" > > > > dmesg output > ---<<BOOT>>--- > Copyright (c) 1992-2023 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 > FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git > llvmorg-19.1.7-0-gcd708029e0b2) > VT(vga): text 80x25 > CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2494.81-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 > Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS> > Features2=0xffbaa223<SSE3,PCLMULQDQ,VMX,SSSE3,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x1<LAHF> > Structured Extended Features=0x283<FSGSBASE,TSCADJ,SMEP,ERMS> > Structured Extended Features2=0x4<UMIP> > Structured Extended > Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> > XSAVE Features=0x1<XSAVEOPT> > IA32_ARCH_CAPS=0xc000048<SKIP_L1DFL_VME> > AMD Extended Feature Extensions ID EBX=0x100d000<IBPB,IBRS,STIBP,SSBD> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr > Hypervisor: Origin = "KVMKVMKVM" > real memory = 8589934592 (8192 MB) > avail memory = 8251035648 (7868 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <BOCHS BXPC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 2 package(s) x 1 core(s) > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > random: unblocking device. > ioapic0 <Version 2.0> irqs 0-23 > Launching APs: 1 > random: entropy device external interface > kbd1 at kbdmux0 > nic_uio: hw.nic_uio.bdfs = '1:0:0,2:0:0' > 0: virt=0xfffffe008ec00000 phys=0x140000000 > 1: virt=0xfffffe00cec00000 phys=0x180000000 > 2: virt=0xfffffe010ec00000 phys=0x1c0000000 > 3: virt=0xfffffe014ec00000 phys=0x200000000 > vtvga0: <VT VGA driver> > kvmclock0: <KVM paravirtual clock> > Timecounter "kvmclock" frequency 1000000000 Hz quality 975 > kvmclock0: registered as a time-of-day clock, resolution 0.000001s > smbios0: <System Management BIOS> at iomem 0xf5200-0xf521e > smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8 > aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> > acpi0: <BOCHS BXPC> > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 100000000 Hz quality 950 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> mem > 0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on pci0 > vgapci0: Boot video device > uhci0: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 16 > at device 26.0 on pci0 > usbus0 on uhci0 > usbus0: 12Mbps Full Speed USB v1.0 > uhci1: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 17 > at device 26.1 on pci0 > usbus1 on uhci1 > usbus1: 12Mbps Full Speed USB v1.0 > uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 18 > at device 26.2 on pci0 > usbus2 on uhci2 > usbus2: 12Mbps Full Speed USB v1.0 > ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem > 0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > usbus3: 480Mbps High Speed USB v2.0 > hdac0: <Intel 82801I HDA Controller> mem 0xfea10000-0xfea13fff irq 16 > at device 27.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 16 at > device 28.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > nic_uio_probe: probed dev=0xfffff80003a11700 > nic_uio0: <DPDK PCI Device> mem > 0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at device > 0.0 on pci1 > pcib2: <ACPI PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 16 at > device 28.1 on pci0 > pci2: <ACPI PCI bus> on pcib2 > nic_uio_probe: probed dev=0xfffff800038ad800 > nic_uio1: <DPDK PCI Device> mem > 0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at device > 0.0 on pci2 > pcib3: <ACPI PCI-PCI bridge> mem 0xfea18000-0xfea18fff irq 16 at > device 28.2 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> mem 0xfea19000-0xfea19fff irq 16 at > device 28.3 on pci0 > pci4: <ACPI PCI bus> on pcib4 > uhci3: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 16 > at device 29.0 on pci0 > usbus4 on uhci3 > usbus4: 12Mbps Full Speed USB v1.0 > uhci4: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 17 > at device 29.1 on pci0 > usbus5 on uhci4 > usbus5: 12Mbps Full Speed USB v1.0 > uhci5: <Intel 82801I (ICH9) USB controller> port 0x50e0-0x50ff irq 18 > at device 29.2 on pci0 > usbus6 on uhci5 > usbus6: 12Mbps Full Speed USB v1.0 > ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem > 0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > usbus7: 480Mbps High Speed USB v2.0 > pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> mem 0xfe000000-0xfe0000ff irq 21 at > device 1.0 on pci5 > pci6: <ACPI PCI bus> on pcib6 > virtio_pci0: <VirtIO PCI (legacy) Network adapter> port 0x4000-0x401f > mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff irq 23 at > device 18.0 on pci6 > vtnet0: <VirtIO Networking Adapter> on virtio_pci0 > vtnet0: Ethernet address: bc:24:11:2a:4f:f2 > vtnet0: netmap queues/slots: TX 1/256, RX 1/512 > 000.000121 [ 452] vtnet_netmap_attach vtnet attached txq=1, > txd=256 rxq=1, rxd=512 > pcib7: <ACPI PCI-PCI bridge> mem 0xfe001000-0xfe0010ff irq 22 at > device 2.0 on pci5 > pci7: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> mem 0xfe002000-0xfe0020ff irq 23 at > device 3.0 on pci5 > pci8: <ACPI PCI bus> on pcib8 > pcib9: <ACPI PCI-PCI bridge> mem 0xfe003000-0xfe0030ff irq 20 at > device 4.0 on pci5 > pci9: <ACPI PCI bus> on pcib9 > virtio_pci1: <VirtIO PCI (legacy) SCSI adapter> port 0x1000-0x103f mem > 0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at device > 1.0 on pci9 > vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel ICH9 AHCI SATA controller> port 0x5100-0x511f mem > 0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0 > ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > acpi_syscontainer0: <System Container> on acpi0 > vmgenc0: <VM Generation Counter> on acpi0 > acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0 > acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0 > acpi_syscontainer3: <System Container> port 0xcc0-0xcd7 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: console (115200,n,8,1) > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. > psm0: model IntelliMouse Explorer, device ID 4 > orm0: <ISA Option ROM> at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff > pnpid PNP0900 on isa0 > attimer0: <AT timer> at port 0x40 on isa0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. > Timecounters tick every 10.000 msec > Trying to mount root from ufs:/dev/da0s1a [rw]... > ugen6.1: <Intel UHCI root HUB> at usbus6 > ugen7.1: <Intel EHCI root HUB> at usbus7 > uhub0 on usbus6 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > uhub1 on usbus7 > uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > ugen3.1: <Intel EHCI root HUB> at usbus3 > ugen5.1: <Intel UHCI root HUB> at usbus5 > uhub2 on usbus3 > uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > uhub3 on usbus5 > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > ugen4.1: <Intel UHCI root HUB> at usbus4 > ugen1.1: <Intel UHCI root HUB> at usbus1 > uhub4 on usbus4 > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen2.1: <Intel UHCI root HUB> at usbus2 > uhub5 on usbus1 > uhub6 on usbus2 > uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen0.1: <Intel UHCI root HUB> at usbus0 > uhub7 on usbus0 > uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > da0 at vtscsi0 bus 0 scbus0 target 0 lun 0 > da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 16384MB (33554432 512 byte sectors) > cd0 at ahcich1 bus 0 scbus2 target 0 lun 0 > cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device > cd0: Serial Number QM00003 > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > uhub0: 2 ports with 2 removable, self powered > uhub5: 2 ports with 2 removable, self powered > uhub7: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > uhub6: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > Root mount waiting for: usbus3 usbus7 > Root mount waiting for: usbus3 usbus7 > uhub1: 6 ports with 6 removable, self powered > uhub2: 6 ports with 6 removable, self powered > WARNING: / was not properly dismounted > Dual Console: Serial Primary, Video Secondary > ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x700-0x73f irq > 16 at device 31.3 on pci0 > smbus0: <System Management Bus> on ichsmb0 > lo0: link state changed to UP > vtnet0: link state changed to UP > nic_uio0: Bar 0 @ 383800000000, size 10000 > nic_uio0: Bar 3 @ 383800010000, size 4000 > nic_uio1: Bar 0 @ 383000000000, size 10000 > nic_uio1: Bar 3 @ 383000010000, size 4000 > nic_uio0: Bar 0 @ 383800000000, size 10000 > nic_uio0: Bar 3 @ 383800010000, size 4000 > nic_uio1: Bar 0 @ 383000000000, size 10000 > nic_uio1: Bar 3 @ 383000010000, size 4000 > Waiting (max 60 seconds) for system process `vnlru' to stop... done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining... 2 0 0 done > All buffers synced. > Uptime: 28m16s > uhub1: detached > uhub0: detached > uhub3: detached > uhub4: detached > uhub2: detached > uhub6: detached > uhub5: detached > uhub7: detached > ---<<BOOT>>--- > Copyright (c) 1992-2023 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 > FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git > llvmorg-19.1.7-0-gcd708029e0b2) > VT(vga): text 80x25 > CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2494.22-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 > Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS> > Features2=0xffbaa223<SSE3,PCLMULQDQ,VMX,SSSE3,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x1<LAHF> > Structured Extended Features=0x283<FSGSBASE,TSCADJ,SMEP,ERMS> > Structured Extended Features2=0x4<UMIP> > Structured Extended > Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> > XSAVE Features=0x1<XSAVEOPT> > IA32_ARCH_CAPS=0xc000048<SKIP_L1DFL_VME> > AMD Extended Feature Extensions ID EBX=0x100d000<IBPB,IBRS,STIBP,SSBD> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr > Hypervisor: Origin = "KVMKVMKVM" > real memory = 8589934592 (8192 MB) > avail memory = 8251035648 (7868 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <BOCHS BXPC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 2 package(s) x 1 core(s) > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > random: unblocking device. > ioapic0 <Version 2.0> irqs 0-23 > Launching APs: 1 > random: entropy device external interface > kbd1 at kbdmux0 > nic_uio: hw.nic_uio.bdfs = '1:0:0,2:0:0' > 0: virt=0xfffffe008ec00000 phys=0x140000000 > 1: virt=0xfffffe00cec00000 phys=0x180000000 > 2: virt=0xfffffe010ec00000 phys=0x1c0000000 > 3: virt=0xfffffe014ec00000 phys=0x200000000 > vtvga0: <VT VGA driver> > kvmclock0: <KVM paravirtual clock> > Timecounter "kvmclock" frequency 1000000000 Hz quality 975 > kvmclock0: registered as a time-of-day clock, resolution 0.000001s > smbios0: <System Management BIOS> at iomem 0xf5200-0xf521e > smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8 > aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> > acpi0: <BOCHS BXPC> > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 100000000 Hz quality 950 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> mem > 0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on pci0 > vgapci0: Boot video device > uhci0: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 16 > at device 26.0 on pci0 > usbus0 on uhci0 > usbus0: 12Mbps Full Speed USB v1.0 > uhci1: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 17 > at device 26.1 on pci0 > usbus1 on uhci1 > usbus1: 12Mbps Full Speed USB v1.0 > uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 18 > at device 26.2 on pci0 > usbus2 on uhci2 > usbus2: 12Mbps Full Speed USB v1.0 > ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem > 0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > usbus3: 480Mbps High Speed USB v2.0 > hdac0: <Intel 82801I HDA Controller> mem 0xfea10000-0xfea13fff irq 16 > at device 27.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 16 at > device 28.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > nic_uio_probe: probed dev=0xfffff80003a0f700 > nic_uio0: <DPDK PCI Device> mem > 0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at device > 0.0 on pci1 > pcib2: <ACPI PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 16 at > device 28.1 on pci0 > pci2: <ACPI PCI bus> on pcib2 > nic_uio_probe: probed dev=0xfffff800037b0800 > nic_uio1: <DPDK PCI Device> mem > 0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at device > 0.0 on pci2 > pcib3: <ACPI PCI-PCI bridge> mem 0xfea18000-0xfea18fff irq 16 at > device 28.2 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> mem 0xfea19000-0xfea19fff irq 16 at > device 28.3 on pci0 > pci4: <ACPI PCI bus> on pcib4 > uhci3: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 16 > at device 29.0 on pci0 > usbus4 on uhci3 > usbus4: 12Mbps Full Speed USB v1.0 > uhci4: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 17 > at device 29.1 on pci0 > usbus5 on uhci4 > usbus5: 12Mbps Full Speed USB v1.0 > uhci5: <Intel 82801I (ICH9) USB controller> port 0x50e0-0x50ff irq 18 > at device 29.2 on pci0 > usbus6 on uhci5 > usbus6: 12Mbps Full Speed USB v1.0 > ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem > 0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > usbus7: 480Mbps High Speed USB v2.0 > pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> mem 0xfe000000-0xfe0000ff irq 21 at > device 1.0 on pci5 > pci6: <ACPI PCI bus> on pcib6 > virtio_pci0: <VirtIO PCI (legacy) Network adapter> port 0x4000-0x401f > mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff irq 23 at > device 18.0 on pci6 > vtnet0: <VirtIO Networking Adapter> on virtio_pci0 > vtnet0: Ethernet address: bc:24:11:2a:4f:f2 > vtnet0: netmap queues/slots: TX 1/256, RX 1/512 > 000.000121 [ 452] vtnet_netmap_attach vtnet attached txq=1, > txd=256 rxq=1, rxd=512 > pcib7: <ACPI PCI-PCI bridge> mem 0xfe001000-0xfe0010ff irq 22 at > device 2.0 on pci5 > pci7: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> mem 0xfe002000-0xfe0020ff irq 23 at > device 3.0 on pci5 > pci8: <ACPI PCI bus> on pcib8 > pcib9: <ACPI PCI-PCI bridge> mem 0xfe003000-0xfe0030ff irq 20 at > device 4.0 on pci5 > pci9: <ACPI PCI bus> on pcib9 > virtio_pci1: <VirtIO PCI (legacy) SCSI adapter> port 0x1000-0x103f mem > 0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at device > 1.0 on pci9 > vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel ICH9 AHCI SATA controller> port 0x5100-0x511f mem > 0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0 > ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > acpi_syscontainer0: <System Container> on acpi0 > vmgenc0: <VM Generation Counter> on acpi0 > acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0 > acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0 > acpi_syscontainer3: <System Container> port 0xcc0-0xcd7 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: console (115200,n,8,1) > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. > psm0: model IntelliMouse Explorer, device ID 4 > orm0: <ISA Option ROM> at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff > pnpid PNP0900 on isa0 > attimer0: <AT timer> at port 0x40 on isa0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. > Timecounters tick every 10.000 msec > Trying to mount root from ufs:/dev/da0s1a [rw]... > ugen7.1: <Intel EHCI root HUB> at usbus7 > ugen6.1: <Intel UHCI root HUB> at usbus6 > uhub0 on usbus7 > uhub1 on usbus6 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen4.1: <Intel UHCI root HUB> at usbus4 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > uhub2 on usbus4 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1: <Intel UHCI root HUB> at usbus5 > ugen2.1: <Intel UHCI root HUB> at usbus2 > uhub3 on usbus5 > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > ugen3.1: <Intel EHCI root HUB> at usbus3 > uhub4 on usbus2 > uhub5 on usbus3 > uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen0.1: <Intel UHCI root HUB> at usbus0 > ugen1.1: <Intel UHCI root HUB> at usbus1 > uhub6 on usbus0 > uhub7 on usbus1 > uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > da0 at vtscsi0 bus 0 scbus0 target 0 lun 0 > da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 16384MB (33554432 512 byte sectors) > cd0 at ahcich1 bus 0 scbus2 target 0 lun 0 > cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device > cd0: Serial Number QM00003 > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > uhub6: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub7: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > Root mount waiting for: usbus3 usbus7 > Root mount waiting for: usbus3 usbus7 > uhub0: 6 ports with 6 removable, self powered > uhub5: 6 ports with 6 removable, self powered > Dual Console: Serial Primary, Video Secondary > ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x700-0x73f irq > 16 at device 31.3 on pci0 > smbus0: <System Management Bus> on ichsmb0 > lo0: link state changed to UP > vtnet0: link state changed to UP > > > Best Regards, > Cheng Cui > > > -- Kindest regards, Tom Smyth.