[Bug 274440] ice: ice0: Failed to set LAN Tx queue

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=274440

--- Comment #2 from Alan Somers <asomers@FreeBSD.org> ---
(In reply to Jeff Pieper from comment #1)
1. In-kernel
2. LACP
3. There's a tagged VLAN on top of lagg.  But most of the traffic does not go
through the vlan.

ifconfig of all interfaces (except a few unused ones)
====================================================
ice0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 40:a6:b7:6a:ed:90
        media: Ethernet autoselect (25GBase-SR <full-duplex>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ice1: flags=8822<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 40:a6:b7:6a:ed:91
        media: Ethernet autoselect
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ice2: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 40:a6:b7:6a:ed:90
        hwaddr 40:a6:b7:6a:ed:92
        media: Ethernet autoselect (25GBase-SR <full-duplex>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ice3: flags=8822<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 40:a6:b7:6a:ed:93
        media: Ethernet autoselect
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 40:a6:b7:6a:ed:90
        inet 10.2.11.21 netmask 0xfffffe00 broadcast 10.2.11.255
        laggproto lacp lagghash l2,l3,l4
        laggport: ice0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
        laggport: ice2 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
        groups: lagg
        media: Ethernet autoselect
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lagg0.999: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=4600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
        ether 40:a6:b7:6a:ed:90
        inet 172.30.11.21 netmask 0xffff0000 broadcast 172.30.255.255
        groups: vlan
        vlan: 999 vlanproto: 802.1q vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>

/boot/loader.conf
=================
geom_mirror_load="YES"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
cryptodev_load="YES"
zfs_load="YES"
boot_multicons="yes"
comconsole_port="0x2F8"
comconsole_speed="115200"
console="comconsole efi"
debug.debugger_on_panic="0"
geom_eli_load="YES"
geom_multipath_load="YES"
hint.uart.1.disabled=0
hint.uart.1.flags="0x10"
ice_ddp_load="YES"
ipmi_load="YES"
kern.cam.ctl.max_luns="4096"
kern.cam.ctl.max_ports="4096"
kern.kstack_pages="8"
machdep.hyperthreading_allowed="0"

-- 
You are receiving this mail because:
You are the assignee for the bug.