[Bug 253251] Hardware Revision Realtek 8117

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=253251

--- Comment #9 from Torfinn Ingolfsen <tingox+freebsd@gmail.com> ---
Yes - the patch works. With the patch, my dmesg output is
```
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x2200-0x22ff mem 0xfc511000-0xfc511fff,0xfc504000-0xfc507fff at device 0.1 on
pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54800000
re0: MAC rev. 0x00300000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: e0:70:ea:ae:9b:d6
re0: netmap queues/slots: TX 1/256, RX 1/256
```
ifconfig output
```
root@kg-vm5:~ # ifconfig re0
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether e0:70:ea:ae:9b:d6
        inet 10.1.161.20 netmask 0xffff0000 broadcast 10.1.255.255
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
```
this is on FreeBSD 13.2-release-p1
```
root@kg-vm5:~ # freebsd-version -ku
13.2-RELEASE-p1
13.2-RELEASE-p1
root@kg-vm5:~ # uname -a
FreeBSD kg-vm5.kg4.no 13.2-RELEASE-p1 FreeBSD 13.2-RELEASE-p1 #1
releng/13.2-n254621-08b87f63a046-dirty: Fri Jul 14 00:30:35 CEST 2023    
root@kg-vm5.kg4.no:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
```

-- 
You are receiving this mail because:
You are the assignee for the bug.