Re: Bridging LACP PDUs ?

On Thu, Nov 10, 2022 at 04:28:50PM +0300, Özkan KIRIK wrote:
> I'm trying to filter traffic through an uplink cable between two
> switches. (similar to virtual wire behaviour).
> So all broadcast & multicast packages should pass to the other port.
> But pf or ipfw should work for L3+ packages.

So I'd suggest to set up a cross-connect between the interfaces:

# ngctl connect eth0: eth1: lower lower

If you like to filter:
# ngctl mkpeer eth0: bpf lower left
# ngctl connect eth0:lower eth1: right lower

Then you can apply any filtering using ng_bpf (by throwing away
(non)matching traffic to an unconnected hook)