Re: hang up at mount on releng/13
- Reply: Mori Hiroki : "Re: hang up at mount on releng/13"
- In reply to: Mori Hiroki : "hang up at mount on releng/13"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Wed, 09 Jun 2021 20:48:38 UTC
Hi I try to CURRENT today. I have panic now. BTW releng/13 build time is 2:22 but current is 4:28 what is differnet ? Starting kernel ... CPU platform: Atheros AR9341 rev 1 CPU Frequency=535 MHz CPU DDR Frequency=400 MHz CPU AHB Frequency=200 MHz platform frequency: 535 MHz CPU reference clock: 25 MHz CPU MDIO clock: 25 MHz arguments: a0 = 00000007 a1 = a1f73fb0 a2 = a1f74470 a3 = 00000004 Cmd line:argv is invalid Environment: envp is invalid Cache info: picache_stride = 4096 picache_loopcount = 16 pdcache_stride = 4096 pdcache_loopcount = 8 max line size = 32 Physical memory chunk(s): 0x3de000 - 0x1ffffff, 29499392 bytes (7202 pages) Maxmem is 0x2000000 ---<<BOOT>>--- ar934x_chip_init_gmac: gmac_cfg=0x000001c0 ar934x_configure_gmac: ETH_CFG=0x00003000 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT #0 main-5e5ca4c8f: Thu Jun 10 05:30:42 JST 2021 hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/current/mips.mips/sys/IOData_WN-G300R mips FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) Preloaded elf kernel "kernel" at 0x803d7690. CPU: MIPS Technologies (Atheros AR9341 rev 1) processor v76.151 MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line L2 cache: disabled Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> Config2=0x80001000 Config3=0x2c20<ULRI> Config7=0x80000800<WII> real memory = 33554432 (32768K bytes) Physical memory chunk(s): 0x0046a000 - 0x01f84fff, 28422144 bytes (6939 pages) avail memory = 27918336 (26MB) random: no preloaded entropy cache arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. hostuuid: using 00000000-0000-0000-0000-000000000000 random: entropy device external interface mem: <memory> null: <full device, null device, zero device> nexus0: <MIPS32 root nexus> argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0 mdio0: <MDIO> on argemdio0 mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 clock0: <Generic MIPS32 ticker> on nexus0 Timecounter "MIPS32" frequency 267500000 Hz quality 800 Event timer "MIPS32" frequency 267500000 Hz quality 800 argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0 mdio1: <MDIO> on argemdio1 mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1 arswitch0: ar9340_hw_global_setup: GMII arswitch0: ar9340_hw_global_setup: PHY4 - CPU miibus0: <MII bus> on arswitch0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: OUI 0x00c82e, model 0x0004, rev. 2 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus1: <MII bus> on arswitch0 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: OUI 0x00c82e, model 0x0004, rev. 2 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus2: <MII bus> on arswitch0 ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 ukphy2: OUI 0x00c82e, model 0x0004, rev. 2 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus3: <MII bus> on arswitch0 ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 ukphy3: OUI 0x00c82e, model 0x0004, rev. 2 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto etherswitch0: <Switch controller> on arswitch0 mdio2: <MDIO> on arswitch0 mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 apb0 at irq 4 on nexus0 uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 gpio0: [GIANT-LOCKED] gpio0: function_set: 0x0 gpio0: function_clear: 0x0 gpio0: gpio pinmask=0x7da000 gpiobus0: <GPIO bus> on gpio0 gpioled0: <GPIO led> at pin 15 on gpiobus0 gpioled1: <GPIO led> at pin 13 on gpiobus0 gpioled2: <GPIO led> at pin 18 on gpiobus0 gpioc0: <GPIO controller> on gpio0 arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: Generating random ethernet address. miiproxy0: <MII/MDIO proxy, MII side> on arge0 miiproxy0: attached to target mdio2 arge0: finishing attachment, phymask 0001, proxy set miibus4: <MII bus> on miiproxy0 ukphy4: <Generic IEEE 802.3u media interface> PHY 0 on miibus4 ukphy4: OUI 0x00c82e, model 0x0004, rev. 2 ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto arge0: bpf attached arge0: Ethernet address: 0e:94:ca:cb:ce:77 arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 arge1: arge_attach: overriding MII mode to 'GMII' arge1: Generating random ethernet address. mii_attach_proxy: not attaching, no mdio device hint for arge1 arge1: finishing attachment, phymask 0000, proxy null arge1: bpf attached arge1: Ethernet address: c2:db:7b:5e:18:40 spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 spibus0: <SPI bus> on spi0 mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase size 64K ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 Device configuration finished. Timecounters tick every 1.000 msec lo0: bpf attached vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 arswitch0port1: link state changed to DOWN arswitch0port2: link state changed to DOWN arswitch0port3: link state changed to DOWN arswitch0port4: link state changed to DOWN GEOM: new disk flash/spi0 Trying to mount root from cd9660:/dev/map/rootfs.uzip []... MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader" MAP: flash/spi0: 40000x3a0000, data=0x3a0000 "/dev/map/upgrade" MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 MAP: flash/spi0: 40000x110000, data=0x110000 "/dev/map/kernel" MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 MAP: flash/spi0: 150000x290000, data=0x290000 "/dev/map/rootfs" MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" MAP: No valid partition found at map/rootfs.uzip cd9660: RockRidge Extension Warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init arswitch0: arswitch_miipollstat: port 1: port -> UP arswitch0port2: link state changed to UP gpio_pin_set_flags: Invalid argument kenv: unable to get HostName kern.coredump: 1 -> 0 net.inet.ip.forwarding: 0 -> 1 memory disk size = 10m MAP: No valid partition found at md0 random: unblocking device. MAP: No valid partition found at md0 Trap cause = 4 (address error (load or I-fetch) - kernel mode) panic: trap time = 30 KDB: enter: panic [ thread pid 34 tid 100038 ] Stopped at 0x4 db> where Tracing pid 34 tid 100038 td 0x806ef7c0 kdb_enter+0x54 (?,?,?,?) ra 800f3fac sp c5531758 sz 32 vpanic+0x158 (?,?,?,?) ra 800f3e4c sp c5531778 sz 48 panic+0x20 (?,?,?,?) ra 802d8e6c sp c55317a8 sz 32 trap+0x1014 (?,?,?,?) ra 802c6618 sp c55317c8 sz 152 MipsKernGenException+0xe4 (?,?,?,?) ra 0 sp c5531860 sz 0 --- exception, cause ffffffffc077a410 badvaddr 1d000000 --- ffs_balloc_ufs1+0x7ec (?,?,?,?) ra 80688100 sp c5531928 sz 400 0x806880f8 (?,?,?,?) ra 0 sp c5531ab8 sz 0 db> ps pid ppid pgrp uid state wmesg wchan cmd 34 25 17 0 R+ CPU 0 mount 32 0 0 0 DL mdwait 0x80a1d000 [md0] 25 17 17 0 R+ sh 17 1 17 0 Ss+ wait 0xc017f380 sh 16 0 0 0 DL - 0x803cbd00 [soaiod4] 15 0 0 0 DL - 0x803cbd00 [soaiod3] 14 0 0 0 DL - 0x803cbd00 [soaiod2] 13 0 0 0 DL - 0x803cbd00 [soaiod1] 9 0 0 0 DL wrkwait 0x80646380 [map/rootfs.uzip] 8 0 0 0 DL - 0x802f7270 [schedcpu] 7 0 0 0 RL [syncer] 6 0 0 0 RL [vnlru] 5 0 0 0 RL (threaded) [bufdaemon] 100024 RunQ [bufdaemon] 100030 D - 0x80399400 [bufspacedaemon-0] 4 0 0 0 RL (threaded) [pagedaemon] 100023 RunQ [dom0] 100028 D launds 0x803d6ee4 [laundry: dom0] 100029 D umarcl 0x802827f8 [uma] 3 0 0 0 RL [rand_harvestq] 2 0 0 0 DL mx25jq 0x805d2c00 [task: mx25l flash] 12 0 0 0 RL (threaded) [geom] 100014 RunQ [g_event] 100015 D - 0x803a56cc [g_up] 100016 D - 0x803a56d0 [g_down] 11 0 0 0 RL (threaded) [intr] 100006 I [swi5: fast taskq] 100008 I [swi6: task queue] 100009 I [swi6: Giant taskq] 100011 I [swi3: vm] 100012 I [swi1: netisr 0] 100013 RunQ [swi4: clock (0)] 100017 I [swi0: uart] 100018 I [apb intr2: gpio0] 100019 I [int2 arge0] 100020 I [int3 arge1] 10 0 0 0 RL [idle] 1 0 1 0 SLs wait 0xc0165c00 [init] 0 0 0 0 DLs (threaded) [kernel] 100000 D swapin 0x803a5b78 [swapper] 100003 D - 0x8058be00 [softirq_0] 100004 D - 0x8058bd00 [thread taskq] 100005 D - 0x8058bc00 [inm_free taskq] 100007 D - 0x8058b900 [kqueue_ctx taskq] 100010 D - 0x8058b400 [aiod_kick taskq] db> ----- Original Message ----- >From: Mori Hiroki <yamori813@yahoo.co.jp> >To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >Date: 2021/6/5, Sat 08:57 >Subject: hang up at mount on releng/13 > >Hi >I try to boot releng/13 on AR9341. >I have hung up on mount. >If you have advice, please let me know. >Thanks >Hiroki Mori > >---<<BOOT>>--- >ar934x_chip_init_gmac: gmac_cfg=0x000001c0 >ar934x_configure_gmac: ETH_CFG=0x00003000 >KDB: debugger backends: ddb >KDB: current backend: ddb >Copyright (c) 1992-2021 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 13.0-RELEASE-p2 #1 releng/13.0-b74cdf1ec: Sat Jun 5 08:41:04 JST 2021 > hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/src/mips.mips/sys/IOData_WN-G300R mips >FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) >Preloaded elf kernel "kernel" at 0x803cf390. >CPU: MIPS Technologies (Atheros AR9341 rev 1) processor v76.151 > MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) > L1 i-cache: 4 ways of 512 sets, 32 bytes per line > L1 d-cache: 4 ways of 256 sets, 32 bytes per line > L2 cache: disabled > Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> > Config2=0x80001000 > Config3=0x2c20<ULRI> > Config7=0x80000800<WII> >real memory = 33554432 (32768K bytes) >Physical memory chunk(s): >0x00462000 - 0x01f83fff, 28450816 bytes (6946 pages) >avail memory = 27947008 (26MB) >random: no preloaded entropy cache >arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. >hostuuid: using 00000000-0000-0000-0000-000000000000 >random: entropy device external interface >mem: <memory> >null: <full device, null device, zero device> >nexus0: <MIPS32 root nexus> >argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0 >mdio0: <MDIO> on argemdio0 >mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 >clock0: <Generic MIPS32 ticker> on nexus0 >Timecounter "MIPS32" frequency 267500000 Hz quality 800 >Event timer "MIPS32" frequency 267500000 Hz quality 800 >argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0 >mdio1: <MDIO> on argemdio1 >mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 >arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1 >arswitch0: ar9340_hw_global_setup: GMII >arswitch0: ar9340_hw_global_setup: PHY4 - CPU >miibus0: <MII bus> on arswitch0 >ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 >ukphy0: OUI 0x00c82e, model 0x0004, rev. 2 >ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >miibus1: <MII bus> on arswitch0 >ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 >ukphy1: OUI 0x00c82e, model 0x0004, rev. 2 >ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >miibus2: <MII bus> on arswitch0 >ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 >ukphy2: OUI 0x00c82e, model 0x0004, rev. 2 >ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >miibus3: <MII bus> on arswitch0 >ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 >ukphy3: OUI 0x00c82e, model 0x0004, rev. 2 >ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >etherswitch0: <Switch controller> on arswitch0 >mdio2: <MDIO> on arswitch0 >mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 >apb0 at irq 4 on nexus0 >uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 >uart0: console (115200,n,8,1) >uart0: fast interrupt >uart0: PPS capture mode: DCD >gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 >gpio0: [GIANT-LOCKED] >gpio0: function_set: 0x0 >gpio0: function_clear: 0x0 >gpio0: gpio pinmask=0x7da000 >gpiobus0: <GPIO bus> on gpio0 >gpioled0: <GPIO led> at pin 15 on gpiobus0 >gpioled1: <GPIO led> at pin 13 on gpiobus0 >gpioled2: <GPIO led> at pin 18 on gpiobus0 >gpioc0: <GPIO controller> on gpio0 >arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 >arge0: Generating random ethernet address. >miiproxy0: <MII/MDIO proxy, MII side> on arge0 >miiproxy0: attached to target mdio2 >arge0: finishing attachment, phymask 0001, proxy set >miibus4: <MII bus> on miiproxy0 >ukphy4: <Generic IEEE 802.3u media interface> PHY 0 on miibus4 >ukphy4: OUI 0x00c82e, model 0x0004, rev. 2 >ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >arge0: bpf attached >arge0: Ethernet address: 58:9c:fc:10:46:76 >arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 >arge1: arge_attach: overriding MII mode to 'GMII' >arge1: Generating random ethernet address. >mii_attach_proxy: not attaching, no mdio device hint for arge1 >arge1: finishing attachment, phymask 0000, proxy null >arge1: bpf attached >arge1: Ethernet address: 58:9c:fc:10:ff:83 >spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 >spibus0: <SPI bus> on spi0 >mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase size 64K >ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 >Device configuration finished. >Timecounters tick every 1.000 msec >lo0: bpf attached >vlan: initialized, using hash tables with chaining >tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 >arswitch0port1: link state changed to DOWN >arswitch0port2: link state changed to DOWN >arswitch0port3: link state changed to DOWN >arswitch0port4: link state changed to DOWN >GEOM: new disk flash/spi0 >Trying to mount root from cd9660:/dev/map/rootfs.uzip []... >MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader" >MAP: flash/spi0: 40000x3a0000, data=0x3a0000 "/dev/map/upgrade" >MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 >MAP: flash/spi0: 40000x100000, data=0x100000 "/dev/map/kernel" >MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 >MAP: flash/spi0: 140000x2a0000, data=0x2a0000 "/dev/map/rootfs" >MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" >MAP: No valid partition found at map/rootfs.uzip >cd9660: RockRidge Extension >Warning: no time-of-day clock registered, system time will not be set accurately >start_init: trying /sbin/init >arswitch0: arswitch_miipollstat: port 0: port -> UP >arswitch0port1: link state changed to UP ># /sbin/mdconfig -a -t malloc -s 2m >MAP: No valid partition found at md0 >md0 ># newfs -b 4096 -f 512 -n -o space /dev/md0 >random: unblocking device. >/dev/md0: 2.0MB (4096 sectors) block size 4096, fragment size 512 > using 4 cylinder groups of 0.50MB, 129 blks, 528 inodes. >super-block backups (for fsck_ffs -b #) at: > 144, 1176, 2208, 3240 >MAP: No valid partition found at md0 ># mount /dev/md0 /mnt >~KDB: enter: Break to debugger >[ thread pid 27 tid 100037 ] >Stopped at 0x4 >db> ps > pid ppid pgrp uid state wmesg wchan cmd > 27 19 27 0 R+ CPU 0 mount > 25 0 0 0 DL mdwait 0x80b04000 [md0] > 19 1 19 0 Ss+ wait 0xc017f380 sh > 16 0 0 0 RL [soaiod4] > 15 0 0 0 RL [soaiod3] > 14 0 0 0 RL [soaiod2] > 13 0 0 0 RL [soaiod1] > 9 0 0 0 DL wrkwait 0x8063c380 [map/rootfs.uzip] > 8 0 0 0 RL [schedcpu] > 7 0 0 0 RL [syncer] > 6 0 0 0 RL [vnlru] > 5 0 0 0 RL (threaded) [bufdaemon] >100024 RunQ [bufdaemon] >100030 RunQ [bufspacedaemon-0] > 4 0 0 0 RL (threaded) [pagedaemon] >100023 RunQ [dom0] >100028 D launds 0x803cebe4 [laundry: dom0] >100029 RunQ [uma] > 3 0 0 0 RL [rand_harvestq] > 2 0 0 0 DL mx25jq 0x805cbc00 [task: mx25l flash] > 12 0 0 0 RL (threaded) [geom] >100014 RunQ [g_event] >100015 D - 0x8039d41c [g_up] >100016 D - 0x8039d420 [g_down] > 11 0 0 0 RL (threaded) [intr] >100006 I [swi5: fast taskq] >100008 I [swi6: task queue] >100009 I [swi6: Giant taskq] >100011 I [swi3: vm] >100012 I [swi1: netisr 0] >100013 RunQ [swi4: clock (0)] >100017 RunQ [swi0: uart] >100018 I [apb intr2: gpio0] >100019 I [int2 arge0] >100020 I [int3 arge1] > 10 0 0 0 RL [idle] > 1 0 1 0 SLs wait 0xc0165c00 [init] > 0 0 0 0 RLs (threaded) [kernel] >100000 RunQ [swapper] >100003 D - 0x80585e00 [softirq_0] >100004 D - 0x80585d00 [thread taskq] >100005 D - 0x80585c00 [inm_free taskq] >100007 D - 0x80585900 [kqueue_ctx taskq] >100010 D - 0x80585400 [aiod_kick taskq] >db> > >