Re: Trying initial boot of FreeBSD (main so: 15) of Ryzen 9 7950X3D on an ASUS Prime X670-P WIFI: various dmesg -a lines; more
- Reply: Mark Millard : "Re: Trying initial boot of FreeBSD (main so: 15) of Ryzen 9 7950X3D on an ASUS Prime X670-P WIFI: various dmesg -a lines; more"
- In reply to: Mark Millard : "Re: Trying initial boot of FreeBSD (main so: 15) of Ryzen 9 7950X3D on an ASUS Prime X670-P WIFI: various dmesg -a lines; more"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Wed, 01 Nov 2023 12:43:48 UTC
On Nov 1, 2023, at 05:39, Mark Millard <marklmi@yahoo.com> wrote: > On Oct 31, 2023, at 23:00, Mark Millard <marklmi@yahoo.com> wrote: > >> FreeBSD context: >> >> # uname -apKU >> FreeBSD amd64-ZFS 15.0-CURRENT FreeBSD 15.0-CURRENT #126 main-n266130-d521abdff236-dirty: Tue Oct 24 18:17:40 PDT 2023 root@amd64-ZFS:/usr/obj/BUILDs/main-amd64-nodbg-clang/usr/main-src/amd64.amd64/sys/GENERIC-NODBG amd64 amd64 1500002 1500002 >> >> I moved my FreeBDSS boot media from a ThreadRipper 1950X to a Ryzen 9 7950X3D and tried >> booting. It booted but some of the following might be of some note. Is any of it likely >> to be problematical? Any of it of particular interest to anyone? >> >> . . . >> Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP7.UP00.DP40.UP00.DP68], AE_NOT_FOUND (20221020/dswload2-315) >> ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) >> . . . >> pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) >> . . . >> pci8: <network, ethernet> at device 0.0 (no driver attached) >> . . . >> pci9: <network> at device 0.0 (no driver attached) >> . . . >> pci15: <encrypt/decrypt> at device 0.2 (no driver attached) >> . . . >> ns8250: UART FCR is broken >> ns8250: UART FCR is broken >> . . . >> intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 >> intsmb0: Could not allocate I/O space >> device_attach: intsmb0 attach returned 6 >> intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0 >> intsmb0: Could not allocate I/O space >> device_attach: intsmb0 attach returned 6 >> . . . >> intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 >> intsmb0: Could not allocate I/O space >> device_attach: intsmb0 attach returned 6 >> intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0 >> intsmb0: Could not allocate I/O space >> device_attach: intsmb0 attach returned 6 >> acpi_wmi0: <ACPI-WMI mapping> on acpi0 >> acpi_wmi0: cannot find EC device >> acpi_wmi0: Embedded MOF found >> ACPI: \134AWW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) >> acpi_wmi1: <ACPI-WMI mapping> on acpi0 >> acpi_wmi1: cannot find EC device >> acpi_wmi1: Embedded MOF found >> ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) >> acpi_wmi2: <ACPI-WMI mapping> on acpi0 >> acpi_wmi2: cannot find EC device >> acpi_wmi2: Embedded MOF found >> ACPI: \134RMTW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) >> acpi_wmi3: <ACPI-WMI mapping> on acpi0 >> acpi_wmi3: cannot find EC device >> acpi_wmi3: Embedded MOF found >> ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) >> driver bug: Unable to set devclass (class: ppc devname: (unknown)) >> . . . >> acpi_wmi4: <ACPI-WMI mapping> on acpi0 >> acpi_wmi4: cannot find EC device >> acpi_wmi4: Embedded MOF found >> ACPI: \134_SB.ATKD.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) >> driver bug: Unable to set devclass (class: ppc devname: (unknown)) >> . . . >> mixer: speaker: no such device >> mixer: speaker: no such device >> mixer: line: no such device >> mixer: line: no such device >> mixer: mic: no such device >> mixer: mic: no such device >> mixer: mic: no such device >> mixer: mix: no such device >> mixer: mix: no such device >> mixer: rec: no such device >> mixer: rec: no such device >> mixer: igain: no such device >> mixer: igain: no such device >> mixer: ogain: no such device >> mixer: ogain: no such device >> mixer: rec: no such device >> mixer: rec: no such device >> mixer: igain: no such device >> mixer: igain: no such device >> mixer: ogain: no such device >> mixer: ogain: no such device >> mixer: monitor: no such device >> mixer: monitor: no such device >> mixer: monitor: no such device >> . . . >> uhid2 on uhub0 >> uhid2: <Corsair CORSAIR iCUE COMMANDER Core, class 0/0, rev 2.00/1.00, addr 3> on usbus1 >> devmatch: devinfo_init: Invalid argument >> uhid3 on uhub4 >> uhid3: <Corsair CORSAIR M55 RGB PRO Gaming Mouse, class 0/0, rev 2.00/4.07, addr 1> on usbus0 >> . . . >> uhid4 on uhub4 >> uhid4: <Corsair CORSAIR K55 RGB PRO Gaming Keyboard, class 0/0, rev 1.10/1.02, addr 2> on usbus0 >> devmatch: devinfo_init: Invalid argument >> uhid6 on uhub4 >> uhid6: <Corsair CORSAIR K55 RGB PRO Gaming Keyboard, class 0/0, rev 1.10/1.02, addr 2> on usbus0 >> . . . >> pci0:8:0:0: no VPD ident found >> . . . >> >> I used a USB3 Ethernet dongle in order to have Ethernet available. >> >> For reference: >> >> # pciconf -lvV | less >> . . . >> none0@pci0:0:0:2: class=0x080600 rev=0x00 hdr=0x00 vendor=0x1022 device=0x14d9 subvendor=0x1043 subdevice=0x8877 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = base peripheral >> subclass = IOMMU >> . . . >> none1@pci0:0:20:0: class=0x0c0500 rev=0x71 hdr=0x00 vendor=0x1022 device=0x790b subvendor=0x1043 subdevice=0x8877 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> device = 'FCH SMBus Controller' >> class = serial bus >> subclass = SMBus >> . . . >> none2@pci0:8:0:0: class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x1043 subdevice=0x87d7 >> vendor = 'Realtek Semiconductor Co., Ltd.' >> device = 'RTL8125 2.5GbE Controller' >> class = network >> subclass = ethernet >> none3@pci0:9:0:0: class=0x028000 rev=0x00 hdr=0x00 vendor=0x10ec device=0xb852 subvendor=0x1a3b subdevice=0x5471 >> vendor = 'Realtek Semiconductor Co., Ltd.' >> class = network >> . . . >> none4@pci0:15:0:2: class=0x108000 rev=0x00 hdr=0x00 vendor=0x1022 device=0x1649 subvendor=0x1043 subdevice=0x8877 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> device = 'VanGogh PSP/CCP' >> class = encrypt/decrypt >> . . . >> >> >> >> Example temperatures (while idle, ambient around 20 DegC): >> >> # kldload amdtemp >> # sysctl dev.amdtemp >> dev.amdtemp.0.ccd1: 33.0C >> dev.amdtemp.0.ccd0: 34.6C >> dev.amdtemp.0.core0.sensor0: 39.6C >> dev.amdtemp.0.sensor_offset: 0 >> dev.amdtemp.0.%parent: hostb0 >> dev.amdtemp.0.%pnpinfo: dev.amdtemp.0.%location: dev.amdtemp.0.%driver: amdtemp >> dev.amdtemp.0.%desc: AMD CPU On-Die Thermal Sensors >> dev.amdtemp.%parent: >> >> Example during llvm build activity during buildworld: >> >> # sysctl dev.amdtemp >> dev.amdtemp.0.ccd1: 60.5C >> dev.amdtemp.0.ccd0: 67.2C >> dev.amdtemp.0.core0.sensor0: 77.1C >> . . . >> >> (Of course, the cooling system in place contributes greatly.) >> >> >> Example from scratch builds (of my usual style of personal builds): >> >> ThreadRipper 1950X: World built in 1345 seconds, ncpu: 32, make -j32 >> Ryzen 9 7950X3D: World built in 545 seconds, ncpu: 32, make -j32 >> >> ThreadRipper 1950X: Kernel(s) GENERIC-NODBG built in 123 seconds, ncpu: 32, make -j32 >> Ryzen 9 7950X3D: Kernel(s) GENERIC-NODBG built in 51 seconds, ncpu: 32, make -j32 >> >> Note: It is the same media in use: PCIe Optane moved from the 1950X >> to the 7950X3D, ZFS (for bectl use, not other reasons ZFS is commonly >> used for). >> >> ThreadRipper 1950X: 128 GiBytes of RAM. Swap parition was 480 GiBytes at the time. >> Ryzen 9 7950X3D: 96 GiBytes of RAM. Swap parition changed to 364 GiBytes. >> >> (That avoids the swapon warning about possibly being out of tune vs. the amount of >> RAM.) > > > An ongoing poudriere bulk -a test looks to have a stuck objdump ( used for building > www/node18 ): > > # ps -oetime -alxdww | grep node18 > 05:48:03 0 44960 53404 21 68 0 18544 2892 select I 0 0:00.03 | | |-- sh: poudriere[main-amd64-bulk_a-default][15]: build_pkg (node18-18.18.2) (sh) > 05:47:36 0 76480 44960 21 68 0 18544 2892 wait I 0 0:00.00 | | | `-- sh: poudriere[main-amd64-bulk_a-default][15]: build_pkg (node18-18.18.2) (sh) > 05:47:36 0 76485 76480 19 68 0 12896 276 wait IJ 0 0:00.01 | | | `-- /usr/bin/make -C /usr/ports/www/node18 build > 05:47:36 0 77304 76485 22 68 0 13356 288 wait IJ 0 0:00.00 | | | `-- /bin/sh -e -c (cd /wrkdirs/usr/ports/www/node18/work/node-v18.18.2; if ! /usr/bin/env CC.host=" cc" CFLAGS.host="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing " CXX.host=" c++" CXXFLAGS.host="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include " LDFLAGS.host=" -fstack-protector-strong " LINK.host="c++" OPENSSLBASE=/usr OPENSSLDIR=/etc/ssl OPENSSLINC=/usr/include OPENSSLLIB=/usr/lib XDG_DATA_HOME=/wrkdirs/usr/ports/www/node18/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/www/node18/work XDG_CACHE_HOME=/wrkdirs/usr/ports/www/node18/work/.cache HOME=/wrkdirs/usr/ports/www/node18/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/www/node18/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/www/node18/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig DONTSTRIP=yes DONTSTRIP=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local CC="cc" CFLAGS="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing " CPP="cpp" CPPFLAGS="-isystem /usr/local/include" LDFLAGS=" -fstack-protector-strong " LIBS="-L/usr/local/lib" CXX="c++" CXXFLAGS="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -m 555" BSD_INSTALL_LIB="install -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" gmake -f Makefile -j32 all; then if [ -n "Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer." ] ; then echo "===> Compilation failed unexpectedly."; (echo "Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer.") | /usr/bin/fmt 75 79 ; fi; false; fi) > 05:33:34 0 7035 80309 9 26 0 22620 1312 piperd SJ 0 32:56.31 | | | `-- /usr/local/bin/python3.9 tools/genv8constants.py /wrkdirs/usr/ports/www/node18/work/node-v18.18.2/out/Release/obj/gen/v8constants.h /wrkdirs/usr/ports/www/node18/work/node-v18.18.2/out/Release/obj.target/tools/v8_gypfiles/libv8_base_without_compiler.a > 05:33:32 0 8045 7035 9 94 0 4443576 15732 - RJ 0 39:43.22 | | | `-- objdump -z -D /wrkdirs/usr/ports/www/node18/work/node-v18.18.2/out/Release/obj.target/tools/v8_gypfiles/libv8_base_without_compiler.a > 00:00 0 98535 2129 23 20 0 12784 1836 piperd S+ 2 0:00.00 | `-- grep node18 > > For reference: > > # ~/fbsd-based-on-what-commit.sh -C /usr/ports/ > 6ec8e3450b29 (HEAD -> main, freebsd/main, freebsd/HEAD) devel/sdts++: Mark DEPRECATED > Author: Muhammad Moinur Rahman <bofh@FreeBSD.org> > Commit: Muhammad Moinur Rahman <bofh@FreeBSD.org> > CommitDate: 2023-10-21 19:01:38 +0000 > branch: main > merge-base: 6ec8e3450b29462a590d09fb0b07ed214d456bd5 > merge-base: CommitDate: 2023-10-21 19:01:38 +0000 > n637598 (--first-parent --count for merge-base) > Looks like www/node16 has the same sort of issue as www/node18 : # ps -oetime -alxdww | grep node16 02:24:49 0 58471 53404 30 68 0 18544 2884 select I 0 0:00.03 | | |-- sh: poudriere[main-amd64-bulk_a-default][17]: build_pkg (node16-16.20.1_1) (sh) 02:15:35 0 1626 58471 18 68 0 18544 2884 wait I 0 0:00.00 | | | `-- sh: poudriere[main-amd64-bulk_a-default][17]: build_pkg (node16-16.20.1_1) (sh) 02:15:35 0 1655 1626 21 68 0 12896 276 wait IJ 0 0:00.02 | | | `-- /usr/bin/make -C /usr/ports/www/node16 build 02:15:34 0 2154 1655 11 68 0 13356 280 wait IJ 0 0:00.00 | | | `-- /bin/sh -e -c (cd /wrkdirs/usr/ports/www/node16/work/node-v16.20.1; if ! /usr/bin/env OPENSSLBASE=/usr OPENSSLDIR=/etc/ssl OPENSSLINC=/usr/include OPENSSLLIB=/usr/lib XDG_DATA_HOME=/wrkdirs/usr/ports/www/node16/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/www/node16/work XDG_CACHE_HOME=/wrkdirs/usr/ports/www/node16/work/.cache HOME=/wrkdirs/usr/ports/www/node16/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/www/node16/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/www/node16/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig DONTSTRIP=yes DONTSTRIP=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local CC="cc" CFLAGS="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing " CPP="cpp" CPPFLAGS="-isystem /usr/local/include" LDFLAGS=" -fstack-protector-strong " LIBS="-L/usr/local/lib" CXX="c++" CXXFLAGS="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -Wno-error=enum-constexpr-conversion -isystem /usr/local/include " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -m 555" BSD_INSTALL_LIB="install -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" gmake -f Makefile -j32 CC.host=" cc" CFLAGS.host="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing " CXX.host=" c++" CXXFLAGS.host="-O2 -pipe -g -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing -Wno-error=enum-constexpr-conversion -isystem /usr/local/include " LINK.host=c++ LDFLAGS.host=" -fstack-protector-strong " all; then if [ -n "Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer." ] ; then echo "===> Compilation failed unexpectedly."; (echo "Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintaine 01:55:30 0 84603 3452 15 47 0 22620 1312 - RJ 0 14:00.49 | | | `-- /usr/local/bin/python3.9 tools/genv8constants.py /wrkdirs/usr/ports/www/node16/work/node-v16.20.1/out/Release/obj/gen/v8constants.h /wrkdirs/usr/ports/www/node16/work/node-v16.20.1/out/Release/obj.target/tools/v8_gypfiles/libv8_base_without_compiler.a 01:55:27 0 86093 84603 15 101 0 3754296 32540 - RJ 0 16:59.56 | | | `-- objdump -z -D /wrkdirs/usr/ports/www/node16/work/node-v16.20.1/out/Release/obj.target/tools/v8_gypfiles/libv8_base_without_compiler.a 00:00 0 84657 2129 29 20 0 12784 1812 piperd S+ 2 0:00.00 | `-- grep node16 === Mark Millard marklmi at yahoo.com