Re: Upgrade to 14.3 stuck

From: Ben Hutton <ben_at_benhutton.com.au>
Date: Fri, 13 Jun 2025 00:09:14 UTC
Have you tried compiling/installing the drm-kmod from ports? I had the 
kernel mismatch error the last time I updated and installing drm-kmod 
from ports resolve it on my system.

Ben

On 13/06/2025 04:26, Pedro Andres Aranda Gutierrez wrote:
> Reported on bugzilla.
>
> On Thu, 12 Jun 2025 at 18:24, Pedro Andres Aranda Gutierrez 
> <paaguti@gmail.com> wrote:
>
>     Hi
>
>     that worries me...
>     I installed the new kernel and refreshed the package db and
>     upgraded packages and then freebsd-update as per the
>     instructions (I hope)...
>     and my uname -a says that I'm on a 14.3-RELEASE
>     releng/14.3-n271432 GENERIC amd64
>
>     I'm updating once again to see went wrong...
>     If I try freebsd-update fetch
>     it says
>     No updates needed to update system to 14-3-RELEASE-p0
>
>     pkg repositories shows
>
>     FreeBSD:14:amd64/quarterly
>
>     and
>
>     FREEBSD-kmods:14:amd64/kmods_quearterly_3
>
>     and, after removing everything drm-kmod (pkg delete/pkg
>     autoremove) and rebooting
>     it continues to install the 20220511.140200 packages
>
>     Thx for clues and time...
>     /PA
>     /PA
>
>     On Thu, 12 Jun 2025 at 17:32, Bjoern A. Zeeb
>     <bzeeb-lists@lists.zabbadoz.net> wrote:
>
>         On Thu, 12 Jun 2025, Pedro Andres Aranda Gutierrez wrote:
>
>         > HI Bjoern,
>         >
>         > thanks a lot for reaching out :-)
>         >
>         > Copying from the screen... so some spaces are omitted:
>         >
>         > During boot I see
>         > KLD i915kms.ko: depends on kernel - not available or version
>         mismatch
>         > kldload: can't load i915kms: module already loaded or in kernel
>         > /etc/rc: WARNING: Unable to load kernel module i915kms
>         >
>         > Relevant drivers after several pkg delete-pkg autoremove-pkg
>         install for
>         > drm-kmod are:
>         >
>         > drm-kmod-20250420
>         > drm-61-kmod-6.1.128.1402000_4
>
>         That is a module for the 14.2-R.  You need to update your packages
>         (after booting the new kernel).
>
>
>         > gpu-firmware-intel-kmod-...-20230625.1402000
>         > gpu-firmware-kmod-20241114,1
>         >
>         > PCI info
>         >
>         > vgapci0@pci0:0:2:0: class=0x030000 rev=0x99 hdr=0x00
>         vendor=0x8086
>         > device=0x1616 subvedor=0x103c subdevice00x2216
>         > vendor="Intel corporation'
>         > device='HD Graphics 5500'
>         > class=display
>         > subclass=VGA
>         >
>         > in /etc/rc.conf
>         >
>         > kldlist="i915kms"
>         >
>         > Thx for any help
>         > /PA
>         >
>         > On Thu, 12 Jun 2025 at 16:44, Bjoern A. Zeeb
>         <bzeeb-lists@lists.zabbadoz.net>
>         > wrote:
>         >
>         >> On Thu, 12 Jun 2025, Pedro A. Aranda wrote:
>         >>
>         >> Hi,
>         >>
>         >> I am not a graphics person but let's get started.
>         >>
>         >>> after following the manual for a release update from 14.2
>         to 14.3, I'm
>         >> stuck
>         >>> without graphics.
>         >>>
>         >>> In the boot process I see that it says that module
>         i915kms, which is in
>         >> my
>         >>> kldlist is already loaded (puzzled here) and in the xorg
>         log, it says
>         >> that it
>         >>> couldn't load the intel module.
>         >>>
>         >>> I've gone as far as to remove the drm-kmod, xorg and
>         kde/plasma packages
>         >> and
>         >>> reinstall them, but it has not helped.
>         >>>
>         >>> Any guidance appretiated,
>         >>
>         >> Tell us which pakages are installed maybe?
>         >>
>         >> - which drm version
>         >> - which gpu-firmware
>         >>
>         >> % pkg info | egrep "^(drm|gpu-)"
>         >>
>         >>
>         >> And which exact model do you have?
>         >>
>         >> % pciconf -lv vgapci0
>         >>
>         >>
>         >> Lastly, can you copy the errors you are seeing into the email?
>         >>
>         >>
>         >> --
>         >> Bjoern A. Zeeb                  r15:7
>         >>
>         >
>         >
>         >
>
>         -- 
>         Bjoern A. Zeeb          r15:7
>
>
>
>     -- 
>     Fragen sind nicht da, um beantwortet zu werden,
>     Fragen sind da um gestellt zu werden
>     Georg Kreisler
>
>     Sagen's Paradeiser, write BE!
>     Year 1 of the New Koprocracy
>
>
>
> -- 
> Fragen sind nicht da, um beantwortet zu werden,
> Fragen sind da um gestellt zu werden
> Georg Kreisler
>
> Sagen's Paradeiser, write BE!
> Year 1 of the New Koprocracy
>