Re: Upgrade to 14.3 stuck

Hi

that worries me...
I installed the new kernel and refreshed the package db and upgraded
packages and then freebsd-update as per the instructions (I hope)...
and my uname -a says that I'm on a 14.3-RELEASE releng/14.3-n271432 GENERIC
amd64

I'm updating once again to see went wrong...
If I try freebsd-update fetch
it says
No updates needed to update system to 14-3-RELEASE-p0

pkg repositories shows

FreeBSD:14:amd64/quarterly

and

FREEBSD-kmods:14:amd64/kmods_quearterly_3

and, after removing everything drm-kmod (pkg delete/pkg autoremove) and
rebooting
it continues to install the 20220511.140200 packages

Thx for clues and time...
/PA
/PA

On Thu, 12 Jun 2025 at 17:32, Bjoern A. Zeeb <bzeeb-lists@lists.zabbadoz.net>
wrote:

> On Thu, 12 Jun 2025, Pedro Andres Aranda Gutierrez wrote:
>
> > HI Bjoern,
> >
> > thanks a lot for reaching out :-)
> >
> > Copying from the screen... so some spaces are omitted:
> >
> > During boot I see
> > KLD i915kms.ko: depends on kernel - not available or version mismatch
> > kldload: can't load i915kms: module already loaded or in kernel
> > /etc/rc: WARNING: Unable to load kernel module i915kms
> >
> > Relevant drivers after several pkg delete-pkg autoremove-pkg install for
> > drm-kmod are:
> >
> > drm-kmod-20250420
> > drm-61-kmod-6.1.128.1402000_4
>
> That is a module for the 14.2-R.  You need to update your packages
> (after booting the new kernel).
>
>
> > gpu-firmware-intel-kmod-...-20230625.1402000
> > gpu-firmware-kmod-20241114,1
> >
> > PCI info
> >
> > vgapci0@pci0:0:2:0: class=0x030000 rev=0x99 hdr=0x00 vendor=0x8086
> > device=0x1616 subvedor=0x103c subdevice00x2216
> > vendor="Intel corporation'
> > device='HD Graphics 5500'
> > class=display
> > subclass=VGA
> >
> > in /etc/rc.conf
> >
> > kldlist="i915kms"
> >
> > Thx for any help
> > /PA
> >
> > On Thu, 12 Jun 2025 at 16:44, Bjoern A. Zeeb <
> bzeeb-lists@lists.zabbadoz.net>
> > wrote:
> >
> >> On Thu, 12 Jun 2025, Pedro A. Aranda wrote:
> >>
> >> Hi,
> >>
> >> I am not a graphics person but let's get started.
> >>
> >>> after following the manual for a release update from 14.2 to 14.3, I'm
> >> stuck
> >>> without graphics.
> >>>
> >>> In the boot process I see that it says that module i915kms, which is in
> >> my
> >>> kldlist is already loaded (puzzled here) and in the xorg log, it says
> >> that it
> >>> couldn't load the intel module.
> >>>
> >>> I've gone as far as to remove the drm-kmod, xorg and kde/plasma
> packages
> >> and
> >>> reinstall them, but it has not helped.
> >>>
> >>> Any guidance appretiated,
> >>
> >> Tell us which pakages are installed maybe?
> >>
> >> - which drm version
> >> - which gpu-firmware
> >>
> >> % pkg info | egrep "^(drm|gpu-)"
> >>
> >>
> >> And which exact model do you have?
> >>
> >> % pciconf -lv vgapci0
> >>
> >>
> >> Lastly, can you copy the errors you are seeing into the email?
> >>
> >>
> >> --
> >> Bjoern A. Zeeb                                                     r15:7
> >>
> >
> >
> >
>
> --
> Bjoern A. Zeeb                                                     r15:7
>


-- 
Fragen sind nicht da, um beantwortet zu werden,
Fragen sind da um gestellt zu werden
Georg Kreisler

Sagen's Paradeiser, write BE!
Year 1 of the New Koprocracy