wifi-tui , a new package for FreeBSD 15.1
- Reply: Enji Cooper (yaneurabeya): "Re: wifi-tui , a new package for FreeBSD 15.1"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 17 Aug 2026 01:46:46 UTC
Good Morning everyone I'm working on a new package to ease the configuration of WIFI for FreeBSD, and my current computer doesn't support FreeBSD 15.1 , in the dmesg the iwlwifi is loading without issue , but after login to the system it is not working, have anyone faced this issue previously iwlwifi0: <iwlwifi> mem 0x6001144000-0x6001147fff at device 20.3 on pci0 iwlwifi0: Detected crf-id 0x400410, cnv-id 0x80400 wfpm id 0x80000020 iwlwifi0: PCI dev 51f1/0094, rev=0x370, rfid=0x2010d000 iwlwifi0: Detected Intel(R) Wi-Fi 6E AX211 160MHz iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0-89.ucode' iwlwifi0: loaded firmware version 89.735b75a4.0 so-a0-gf-a0-89.ucode op_mode iwlmvm iwlwifi0: BIOS contains WGDS but no WRDS iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f iwlwifi0: WFPM_AUTH_KEY_0: 0x90 iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 iwlwifi0: Detected RF GF, rfid=0x2010d000 iwlwifi0: RFIm is deactivated, reason = 4 iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0.pnvm' iwlwifi0: base HW address: 6c:f6:da:4e:e8:55 ig4iic0: <Intel Alder Lake-P I2C Controller-0> at device 21.0 on pci0 ig4iic0: Using MSI iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 iicbus0: <unknown card> at addr 0x2c ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x600114c000-0x600114c0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: Embedded MOF found acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: Embedded MOF found re0: link state changed to UP lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP iichid0: <ELAN079B:00 04F3:3245 I2C HID device> at addr 0x2c on iicbus0 iichid0: Using sampling mode hidbus0: <HID bus> on iichid0 hms0: <ELAN079B:00 04F3:3245 Mouse> on hidbus0 hms0: 2 buttons and [XY] coordinates ID=1 hmt0: <ELAN079B:00 04F3:3245 TouchPad> on hidbus0 hconf0: <ELAN079B:00 04F3:3245 Configuration> on hidbus0 hmt0: Multitouch touchpad with 0 external buttons, click-pad hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1945] Security policy loaded: MAC/ntpd (mac_ntpd) The source code and documentation is in https://github.com/hirechbaghdad/wifi-tui