Changes in cam/nvme causes issues?

Hi Warner,

I try to update a 15-current (as of 2025-11-27-110715) to a recent 16 
(as of 2025-12-13-132815). It fails to import a pool due to a missing 
nvme. I also have a broken HD in this system... to be on the safe side I 
mention it.

This is from 15-current:
---snip---
         NAME                               STATE     READ WRITE CKSUM
         rpool                              DEGRADED     0     0     0
           mirror-0                         DEGRADED     0     0     0
             diskid/DISK-WD-WCC4N4KLEZT7p3  ONLINE       0     0     0
             diskid/DISK-WD-WCC4N1DF9DA2p3  ONLINE       0     0     0
             diskid/DISK-WD-WX52D625R0NTp3  ONLINE       0     0     0
             diskid/DISK-WD-WCC4N1PYJ3F8p3  OFFLINE      0     0     0
         logs
           diskid/DISK-493504058890547p1    ONLINE       0     0     0
         cache
           diskid/DISK-493504058890547p2    ONLINE       0     0     0

         NAME                               STATE     READ WRITE CKSUM
         space                              DEGRADED     0     0     0
           raidz2-0                         DEGRADED     0     0     0
             diskid/DISK-WD-WCC4N4KLEZT7p4  ONLINE       0     0     0
             diskid/DISK-WD-WCC4N1DF9DA2p4  ONLINE       0     0     0
             diskid/DISK-WD-WX52D625R0NTp4  ONLINE       0     0     0
             diskid/DISK-WD-WX52D625R2TPp4  ONLINE       0     0     0
             diskid/DISK-WD-WCC4N1PYJ3F8p4  OFFLINE      0     0     0
         logs
           diskid/DISK-S649NL0T819360Vp2    ONLINE       0     0     0
         cache
           diskid/DISK-S649NL0T819360Vp3    ONLINE       0     0     0
---snip---

The offline marked partitions are on the same HD (the broken one). The 
DISK-S649NL0T819360V device use as log and cache in the second pool 
causes the issue on 16-current.

On 16-current I get "uncorrectable parity/CRC error" messages on boot 
from the broken disk. I used this to get rid of those errors:
---snip---
# grep kern.cam /tmp/be_mount.MhLw/boot/loader.conf
kern.cam.tur_timeout="60"
kern.cam.inquiry_timeout="60"
kern.cam.modesense_timeout="60"
---snip---

But the second pool ("space") fails to get imported. When I import it 
via "zpool import -m space" it shows me that the log and cache devices 
(different partitions on the same hardware) are not available.
This is the device in question as seen from 15-current:
---snip---
nda0: <Samsung SSD 980 1TB 2B4QFXO7 S649NL0T819360V>
nda0: Serial Number S649NL0T819360V
[1] nda0: nvme version 1.4
nda0: 953869MB (1953525168 512 byte sectors)
[1] GEOM: new disk nda0
...
[1] pass6 at nvme0 bus 0 scbus6 target 0 lun 1
pass6: <Samsung SSD 980 1TB 2B4QFXO7 S649NL0T819360V>
pass6: Serial Number S649NL0T819360V
[1] pass6: nvme version 1.4
---snip---

In case you need some info from the 15- or 16-current BE, which info do 
you need?

Bye,
Alexander.

-- 
http://www.Leidinger.net Alexander@Leidinger.net: PGP 0x8F31830F9F2772BF
http://www.FreeBSD.org    netchild@FreeBSD.org  : PGP 0x8F31830F9F2772BF