Samsung T7 external SSD support?

Anyone using a Samsung T7 external SSD with FreeBSD current?

If I plug the drive into a USB 2.0 port, I see

usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device 
Samsung PSSD T7 Shield (0x04e8:0x61fb)
ugen0.2: <Samsung PSSD T7 Shield> at usbus0
umass0 on uhub1
umass0: <Samsung PSSD T7 Shield, class 0/0, rev 2.10/1.00, addr 47> on 
usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Samsung PSSD T7 Shield 0> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number S6NPNS0Y201077Y
da0: 40.000MB/s transfers
da0: 1907729MB (3907029168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>

However, the SSD is supposedly a USB 3.2 gen 2 device with a ~1000 MBps
read/write speed.

When plugged into a USB 3.x port, I typically see

ugen0.2: <vendor 0x0507 product 0x0204> at usbus0

and the device is not listed with usbconfig.  Repeatedly, unplugging the
ssd and re-plugging it into the USB 3.x port, I eventually get the above 
dmesg output.  Do I need a quirk for this SSD to get recognized?  Also,
shouldn't it connect with faster transfer rate than 'da0: 40.0MB/s'?

-- 
steve