Re: 15 & 14: ram_attach vs. its using regions_to_avail vs. "bus_alloc_resource" can lead to: panic("ram_attach: resource %d failed to attach", rid)
Date: Fri, 12 Jan 2024 21:53:15 UTC
On Jan 12, 2024, at 09:57, Doug Rabson <dfr@rabson.org> wrote:
> On Sat, 30 Sept 2023 at 08:47, Mark Millard <marklmi@yahoo.com> wrote:
> ram_attach is based on regions_to_avail but that is a problem for
> its later bus_alloc_resource use --and that can lead to:
>
> panic("ram_attach: resource %d failed to attach", rid);
>
> Unfortunately, the known example is use of EDK2 on RPi4B
> class systems, not what is considered the supported way.
> The panic happens for main [so: 15] and will happen once
> the cortex-a72 handling in 14.0-* is in a build fixed by:
>
> • git: 906bcc44641d - releng/14.0 - arm64: Fix errata workarounds that depend on smccc Andrew Turner
>
> The lack of the fix leads to an earlier panic as stands.
>
>
> sys/kern/subr_physmem.c 's regions_to_avail is based on ignoring
> phys_avail and using only hwregions and exregions. In other words,
> in part:
>
> * Initially dump_avail and phys_avail are identical. Boot time memory
> * allocations remove extents from phys_avail that may still be included
> * in dumps.
>
> This means that early, dedicated memory allocations are treated
> as available for general use by regions_to_avail . The distinction
> is visible in the boot -v output in that:
>
> real memory = 3138154496 (2992 MB)
> Physical memory chunk(s):
> 0x00000000200000 - 0x0000002b7fffff, 727711744 bytes (177664 pages)
> 0x0000002ce3a000 - 0x0000003385ffff, 111304704 bytes (27174 pages)
> 0x000000338c0000 - 0x000000338c6fff, 28672 bytes (7 pages)
> 0x00000033a30000 - 0x00000036efffff, 55377920 bytes (13520 pages)
> 0x000000372e0000 - 0x0000003b2fffff, 67239936 bytes (16416 pages)
> 0x00000040000000 - 0x000000bb3dcfff, 2067648512 bytes (504797 pages)
> avail memory = 3027378176 (2887 MB)
>
> does not list the wider:
>
> 0x00000040000000 - 0x000000bfffffff
>
> because of phys_avail . But the earlier dump based on hwregions and
> exregions shows:
>
> Physical memory chunk(s):
> 0x001d0000 - 0x001effff, 0 MB ( 32 pages)
> 0x00200000 - 0x338c6fff, 822 MB ( 210631 pages)
> 0x33920000 - 0x3b2fffff, 121 MB ( 31200 pages)
> 0x40000000 - 0xbfffffff, 2048 MB ( 524288 pages)
> Excluded memory regions:
> 0x001d0000 - 0x001effff, 0 MB ( 32 pages) NoAlloc
> 0x2b800000 - 0x2ce39fff, 22 MB ( 5690 pages) NoAlloc
> 0x33860000 - 0x338bffff, 0 MB ( 96 pages) NoAlloc
> 0x33920000 - 0x33a2ffff, 1 MB ( 272 pages) NoAlloc
> 0x36f00000 - 0x372dffff, 3 MB ( 992 pages) NoAlloc
>
> which indicates:
>
> 0x40000000 - 0xbfffffff
>
> is available as far as it is concerned.
>
> (Note some code works/displays in terms of: 0x40000000 - 0xc0000000
> instead.)
>
> For aarch64 , sys/arm64/arm64/nexus.c has a nexus_alloc_resource
> that is used as bus_alloc_resource . It ends up rejecting the
> RPi4B boot via using the result of the call in ram_attach:
>
> if (bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, start, end,
> end - start, 0) == NULL)
> panic("ram_attach: resource %d failed to attach", rid);
>
> as shown by the just-prior start/end pair sequence messages:
>
> ram0: reserving memory region: 200000-2b800000
> ram0: reserving memory region: 2ce3a000-33860000
> ram0: reserving memory region: 338c0000-338c7000
> ram0: reserving memory region: 33a30000-36f00000
> ram0: reserving memory region: 372e0000-3b300000
> ram0: reserving memory region: 40000000-c0000000
> panic: ram_attach: resource 5 failed to attach
>
> I do not see anything about this that looks inherently RPi*
> specific for possibly ending up with an analogous panic. So
> I expect the example is sufficient context to identify a
> problem is present, despite EDK2 use not being normal for
> RPi4B's and the like as far as FreeBSD is concerned.
>
> I'm not quite clear why phys_avail changes
Do not be confused by common labeling to distinct
data: Note the "phys_avail" vs. "hwregions" despite
the label "Physical memory chunk(s):" :
static void
cpu_startup(void *dummy)
{
vm_paddr_t size;
int i;
printf("real memory = %ju (%ju MB)\n", ptoa((uintmax_t)realmem),
ptoa((uintmax_t)realmem) / 1024 / 1024);
if (bootverbose) {
printf("Physical memory chunk(s):\n");
for (i = 0; phys_avail[i + 1] != 0; i += 2) {
size = phys_avail[i + 1] - phys_avail[i];
printf("%#016jx - %#016jx, %ju bytes (%ju pages)\n",
(uintmax_t)phys_avail[i],
(uintmax_t)phys_avail[i + 1] - 1,
(uintmax_t)size, (uintmax_t)size / PAGE_SIZE);
}
}
. . .
vs.
physmem_dump_tables(int (*prfunc)(const char *, ...) __printflike(1, 2))
{
size_t i;
int flags;
uintmax_t addr, size;
const unsigned int mbyte = 1024 * 1024;
prfunc("Physical memory chunk(s):\n");
for (i = 0; i < hwcnt; ++i) {
addr = hwregions[i].addr;
size = hwregions[i].size;
prfunc(" 0x%08jx - 0x%08jx, %5ju MB (%7ju pages)\n", addr,
addr + size - 1, size / mbyte, size / PAGE_SIZE);
}
prfunc("Excluded memory regions:\n");
for (i = 0; i < excnt; ++i) {
addr = exregions[i].addr;
size = exregions[i].size;
flags = exregions[i].flags;
prfunc(" 0x%08jx - 0x%08jx, %5ju MB (%7ju pages) %s %s\n",
addr, addr + size - 1, size / mbyte, size / PAGE_SIZE,
(flags & EXFLAG_NOALLOC) ? "NoAlloc" : "",
(flags & EXFLAG_NODUMP) ? "NoDump" : "");
}
. . .
In other words, phys_avail does not change: It is just that phys_avail
and hwregions are for different purposes and can get distinct values but
ultimately both are involved overall and a net-result has to be
generated from them.
> and why that is triggered by the 906bcc44641d commit. I'm wondering if it makes sense to arrange for ram_attach to happen before acpi, e.g. using BUS_PASS_ORDER_FIRST?
===
Mark Millard
marklmi at yahoo.com