Re: TP-LINK USB no carrier after speed test
- Reply: Hans Petter Selasky : "Re: TP-LINK USB no carrier after speed test"
- In reply to: Ivan Quitschal : "Re: TP-LINK USB no carrier after speed test"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Fri, 16 Sep 2022 06:20:59 UTC
On 9/15/22 17:36, Ivan Quitschal wrote: > > > On Thu, 15 Sep 2022, Ivan Quitschal wrote: > >> >> >> On Thu, 15 Sep 2022, Hans Petter Selasky wrote: >> >>> On 9/15/22 17:18, Hans Petter Selasky wrote: >>>> On 9/15/22 17:16, Ivan Quitschal wrote: >>>>> >>>>> Hi All >>>>> >>>>> Does anybody have any idea what could be happening here?. >>>>> I have a laptop DELL INSPIRON 3511 and everything works just fine, >>>>> literally everything. even the iwlwifi0. >>>>> >>>>> But in order to use my full 600mbps, i dont use the wireless but a >>>>> TP-LINK USB ethernet connected on "ue0" >>>>> >>>>> ugen0.6: <TP-Link USB 10/100/1000 LAN> at usbus0, cfg=0 md=HOST >>>>> spd=HIGH (480Mbps) pwr=ON (200mA) >>>>> >>>>> >>>>> but something really strange is happening .. everytime i open the >>>>> chromium e do a speedtest (could be speedtest.net or any other) , >>>>> at the end of the test the eth interface dies .. it changes from >>>>> full-duplex to half-duplex/no carrier and the only way to get the >>>>> internet back thru ue0 is by rebooting the whole thing. >>>>> not even a "service netif restart" does anything >>>>> >>>>> if anyone has any ideas why is that , would be appreciated >>>>> >>>> >>>> Hi, >>>> >>>> I think it some new features they use in the USB data protocol which >>>> we don't support. Check the Linux code. >>>> >>>> Between does: >>>> >>>> usbconfig -d 0.6 reset >>>> >>>> recover the device? >>>> >>>> --HPS >>>> >>> >>> Hi, >>> >>> Search for axge on bugzilla: >>> >>> I suspect you are using this chipset: >>> >>> Try: >>> >>> usbconfig show_ifdrv >>> >>> To know for sure. >>> >>> Also see: >>> >>> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugs.freebsd.org%2Fbugzilla%2Fshow_bug.cgi%3Fid%3D210488&data=05%7C01%7C%7Ce7f888b3635f4e898ca308da972fa69b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637988528164303655%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zvw7m8lJ%2FHocK%2FXJIDfdPv%2FArCpE5pk9lYz%2BY8WzMCc%3D&reserved=0 >>> >>> >>> --HPS >>> >> >> >> Hi Hans, >> >> actually the driver i use is not agxe (i thought it would be by the >> time i >> bought the usbcard) >> >> this is the module im using >> >> if_ure.ko >> >> and thank you , yes, reseting the usb entry with your command worked >> just fine. >> i got the internet back after doing this >> >> usbconfig -d 0.6 reset >> >> do we have a bug here then? >> >> thank you >> >> --tzk >> > > oh, i forgot to mention that the ure driver freezes not during the > download test but in the middle of the upload, always > > dont know if that helps > > thanks > > --tzk Hi Ivan, Yes, there seems to be problem there. I need to look at the driver. Maybe it is simply sending too much data, than the device can handle! --HPS