Re: main-n254654-d4e8207317c results in "no pools available to import"

Reply: Ronald Klop : "Re: main-n254654-d4e8207317c results in "no pools available to import""
In reply to: Ronald Klop : "Re: main-n254654-d4e8207317c results in "no pools available to import""
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: Dennis Clarke <dclarke_at_blastwave.org>
Date: Tue, 12 Apr 2022 08:41:50 UTC
On 4/11/22 14:18, Ronald Klop wrote:
> On 4/11/22 17:17, Dennis Clarke wrote:
>>
>> Did the usual git pull origin main and buildworld/buildkernel but 
>> after installkernel the machine will not boot.
>>
>> The rev seems to be main-n254654-d4e8207317c.
>>
>> I can boot single user mode and get a command prompt but nothing past
>> that. Is there something borked in ZFS in CURRENT ?
>>
>>
>>
> 
> 
> Up until now you are the only one with this error on the mailinglist 
> today. So I doubt something is borked.
> You could consider to share more details about your setup to help people 
> to think along with you.
> 
> Regards,
> Ronald.

I am officially baffled.

I installed latest CURRENT snapshot on another system and then 
buildworld and buildkernel after checkout of d4e8207317c.

At reboot, with a serial console I can get to single user mode no problem :


.
.
.
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH70N UGA0> Removable CD-ROM SCSI device
cd0: Serial Number K18C36A0237
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present 
- tray closed
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 870 QVO 1TB SVQ01B6Q> ACS-4 ATA SATA 3.x device
ada0: Serial Number S5VSNG0NB12944W
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,cd0 in 'Slot 03', SATA Slot: scbus3 target 0
GEOM: new disk ada0
Root mount waiting for: usbus0
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <PixArt USB Optical Mouse> at usbus0
efirtc0: providing initial system time
start_init: trying /sbin/init
Enter root password, or ^D to go multi-user
Password:
Enter full pathname of shell or RETURN for /bin/sh:
root@:/ # uname -apKU
FreeBSD  14.0-CURRENT FreeBSD 14.0-CURRENT #0 
d4e8207317c-n254654-d4e8207317c: Tue Apr 12 08:10:00 UTC 2022 
root@europa:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 amd64 1400056 
1400056
root@:/ #


When I go to full multi-user mode I see the same message "no pools 
available to import" but the machine comes up just fine :



root@:/ # exit
Setting hostuuid: 688682c8-76df-3f6f-3af4-b06ebf2eb755.
Setting hostid: 0xc646c1f3.
no pools available to import
Fast boot: skipping disk checks.
Mounting local filesystems:.
Autoloading module: acpi_wmi
AuACPI: Processor \_PR_.CPU2 (ACPI ID 3) ignored
ACPI: Processor \_PR_.CPU3 (ACPI ID 4) ignored
ACPI: Processor \_PR_.CPU4 (ACPI ID 5) ignored
ACPI: Processor \_PR_.CPU5 (ACPI ID 6) ignored
ACPI: Processor \_PR_.CPU6 (ACPI ID 7) ignored
ACPI: Processor \_PR_.CPU7 (ACPI ID 8) ignored
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \AMW0.WQMO: 1 arguments were passed to a non-method ACPI object 
(Buffer) (20220331/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
pci0: driver added
found-> vendor=0x8086, dev=0xa2ba, revid=0x00
         domain=0, bus=0, slot=22, func=0
         class=07-80-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=16
         powerspec 3  supports D0 D3  current D0
         MSI supports 1 message, 64 bit
pci0:0:22:0: reprobing on driver added
found-> vendor=0x8086, dev=0xa2a1, revid=0x00
         domain=0, bus=0, slot=31, func=2
         class=05-80-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:31:2: reprobing on driver added
found-> vendor=0x8086, dev=0xa2a3, revid=0x00
         domain=0, bus=0, slot=31, func=4
         class=0c-05-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=16
pci0:0:31:4: reprobing on driver added
ichsmb0: <Intel Kaby Lake SMBus controller> port 0xf040-0xf05f mem 
0xf712a000-0xf712a0ff irq 16 at device 31.4 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 2 vector 53
smbus0: <System Management Bus> on ichsmb0
pci1: driver added
pci2: driver added
toloading module: ichsmb
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib 
/usr/local/lib/compat/pkg /usr/local/lib/compat/pkg 
/usr/local/lib/perl5/5.32/malo0: link state changed to UP
ch/CORE
32-bit compatibility ldconfig path: /usre0: link state changed to DOWN
r/lib32
Setting hostname: europa.
Setting up harvesting: 
PURE_RDRAND,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
Starting Network: lo0 re0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
         options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
         inet 127.0.0.1 netmask 0xff000000
         groups: lo
         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
 
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
         ether b0:6e:bf:2e:b7:55
         inet 172.16.35.57 netmask 0xffffffc0 broadcast 172.16.35.63
         media: Ethernet autoselect (none)
         status: no carrier
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Autoloading moduums0 on uhub0
ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 1> on usbus0
le: uhid
Autoloums0: 3 buttons and [XYZ] coordinates ID=0
ading module: ums
Autoloading module: usbhid
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 172.16.35.1
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Clearing /tmp.
Upda
FreeBSD/amd64 (europa) (ttyu0)

login:

FreeBSD/amd64 (europa) (ttyu0)

login:


I am baffled. On another machine, a Lenovo laptop I get to the message 
about "no pools available to import" and the machine hangs there.

Not a clue why.



-- 
Dennis Clarke
RISC-V/SPARC/PPC/ARM/CISC
UNIX and Linux spoken
GreyBeard and suspenders optional