Re: intermittent bsdtar/jemalloc failures

On Thu, Oct 07, 2021 at 04:52:52PM -0400, Mark Johnston wrote:
> On Thu, Oct 07, 2021 at 04:18:28PM -0400, Michael Butler via freebsd-current wrote:
> > On 10/7/21 15:39, Konstantin Belousov wrote:
> > > On Thu, Oct 07, 2021 at 03:28:44PM -0400, Michael Butler via freebsd-current wrote:
> > >> While building a local release bundle, I sometimes get bsdtar failing (and
> > >> dumping core) as follows below. Worse, as can be seen below, it doesn't stop
> > >> the build unless I happen to notice and it yields an incomplete package.
> > >>
> > >> a usr/src/sys/netgraph/ng_checksum.h
> > >> a usr/src/sys/netgraph/ng_message.h
> > >> a usr/src/sys/netgraph/ng_echo.c
> > >> a usr/src/sys/netgraph/ng_gif.h
> > >> <jemalloc>: jemalloc_arena.c:747: Failed assertion:
> > >> "nstime_compare(&decay->epoch, &time) <= 0"
> > >> Abort trap (core dumped)
> > >> sh /usr/src/release/scripts/make-manifest.sh *.txz > MANIFEST
> > >>
> > >> What causes this? Build machine is a 2x4-core Intel box with ZFS
> > >> file-systems all around. I tried stopping NTPD temporarily but the failures
> > >> persist .. sometimes :-(
> > >>
> > >> I've seen this at different points in the archiving process so it doesn't
> > >> seem specific to building kernel.txz.
> > > 
> > > What timecounter do you use? Perhaps show the whole output from
> > > sysctl kern.timecounter.
> > 
> > imb@vm01:/home/imb> sysctl kern.timecounter
> > kern.timecounter.tsc_shift: 1
> > kern.timecounter.smp_tsc_adjust: 0
> > kern.timecounter.smp_tsc: 1
> > kern.timecounter.invariant_tsc: 1
> > kern.timecounter.fast_gettime: 1
> > kern.timecounter.tick: 1
> > kern.timecounter.choice: ACPI-fast(900) HPET(950) i8254(0) TSC-low(1000) 
> > dummy(-1000000)
> > kern.timecounter.hardware: HPET
> > kern.timecounter.alloweddeviation: 5
> > kern.timecounter.timehands_count: 2
> > kern.timecounter.stepwarnings: 0
> > kern.timecounter.tc.ACPI-fast.quality: 900
> > kern.timecounter.tc.ACPI-fast.frequency: 3579545
> > kern.timecounter.tc.ACPI-fast.counter: 16124892
> > kern.timecounter.tc.ACPI-fast.mask: 16777215
> > kern.timecounter.tc.HPET.quality: 950
> > kern.timecounter.tc.HPET.frequency: 14318180
> > kern.timecounter.tc.HPET.counter: 1883995229
> > kern.timecounter.tc.HPET.mask: 4294967295
> > kern.timecounter.tc.i8254.quality: 0
> > kern.timecounter.tc.i8254.frequency: 1193182
> > kern.timecounter.tc.i8254.counter: 57
> > kern.timecounter.tc.i8254.mask: 65535
> > kern.timecounter.tc.TSC-low.quality: 1000
> > kern.timecounter.tc.TSC-low.frequency: 1413153007
> > kern.timecounter.tc.TSC-low.counter: 2352002295
> > kern.timecounter.tc.TSC-low.mask: 4294967295
> > 
> > I overrode the default selection of counter-type as NTPD drifted so 
> > badly as to require stepping almost hourly :-(
> 
> Could you show output from
> 
> # kldload cpuctl
> # cpucontrol -i 0x15 /dev/cpuctl0
> # cpucontrol -i 0x16 /dev/cpuctl0
> 
> as well as a copy of the dmesg after a boot?  I am looking at a similar
> problem currently.

Do you have the issue with jemalloc(3), or the problem with imprecise TSC
frequency as reported by CPUID leaf?