Re: 14-current: unable to boot after upgrade (installworld)
Date: Thu, 09 Dec 2021 18:54:31 UTC
tiger@dl:~ % gpart show
|
=> 40 3907029088 da4 GPT (1.8T)
40 1024 1 freebsd-boot (512K)
1064 984 - free - (492K)
2048 3907026944 2 freebsd-zfs (1.8T)
3907028992 136 - free - (68K)
=> 40 3907029088 da5 GPT (1.8T)
40 1024 1 freebsd-boot (512K)
1064 984 - free - (492K)
2048 3907026944 2 freebsd-zfs (1.8T)
3907028992 136 - free - (68K)
=> 40 3907029088 da6 GPT (1.8T)
40 1024 1 freebsd-boot (512K)
1064 984 - free - (492K)
2048 3907026944 2 freebsd-zfs (1.8T)
3907028992 136 - free - (68K)
=> 40 3907029088 da7 GPT (1.8T)
40 1024 1 freebsd-boot (512K)
1064 984 - free - (492K)
2048 3907026944 2 freebsd-zfs (1.8T)
3907028992 136 - free - (68K)
i'm not sure about video, everything happens faster than I can see :-) but
sometimes the system does not freeze and I can enter commands. Can this
help in some way?
чт, 9 дек. 2021 г. в 18:19, Toomas Soome <tsoome@me.com>:
>
>
> > On 9. Dec 2021, at 20:06, Sergey Dyatko <sergey.dyatko@gmail.com> wrote:
> >
> > I was sure the installer did it when I reinstalled the system from
> scratch. I
> > can load 14-current successfully after boot via PXE and installworld with
> > 13-current
> > now I did the following:
> > 1) boot from HDDs FreeBSD 14.0-CURRENT #0 main-n251494-f953785b3df (with
> > 'old' world)
> > 2)run installworld (f953785b3df)
> > 3) run `gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da${D}`
> > command , where D=4..7
> > root@dl:/usr/src # zpool status
> > pool: zroot
> > state: ONLINE
> > config:
> >
> > NAME STATE READ WRITE CKSUM
> > zroot ONLINE 0 0 0
> > mirror-0 ONLINE 0 0 0
> > da4p2 ONLINE 0 0 0
> > da5p2 ONLINE 0 0 0
> > mirror-1 ONLINE 0 0 0
> > da6p2 ONLINE 0 0 0
> > da7p2 ONLINE 0 0 0
> > errors: No known data errors
> >
> > after `shutdown -r now` system still doesn't boot with the same error.
> As
> > far I can see, there is /boot/lua/config.lua present, but when I try to
> run
> > command more /boot/lua/config.lua system hangs with following error:
> > https://imgur.com/5p0xu6W.png
> >
>
> You seem to get 2x BTX panic, could you try to create video from console,
> so we could get register dumps?
>
> can this system do UEFI boot and if so, can you test it? Could you post
> partition tables?
>
> rgds,
> toomas
>
>
> >
> > чт, 9 дек. 2021 г. в 15:56, Warner Losh <imp@bsdimp.com>:
> >
> >> On Thu, Dec 9, 2021 at 7:58 AM Tomoaki AOKI <junchoon@dec.sakura.ne.jp>
> >> wrote:
> >>
> >>> On Thu, 9 Dec 2021 13:36:10 +0000
> >>> "Sergey V. Dyatko" <sergey.dyatko@gmail.com> wrote:
> >>>
> >>>> Hi,
> >>>>
> >>>> Yesterday I tried to upgrade old 13-current (svn rev r368473) to fresh
> >>>> 14-current from git,it looked like this:
> >>>> 1) git pull https://git.freebsd.org/src.git /usr/src
> >>>> 2) cd /usr/src ; make buildworld; make kernel
> >>>> 3) shutdown -r now
> >>>> after that I _successfully_ booted into 14-current and continued with
> >>>> etcupdate -p
> >>>> make installworld
> >>>> etcupdate -B
> >>>> shutdown -r now
> >>>>
> >>>> but after that server doesn't come back. After I conneted to this
> >> server
> >>> via
> >>>> IPMI ip-kvm I saw following (sorry for external link):
> >>>> https://i.imgur.com/jH6MHd2.png
> >>>>
> >>>> Well. There was a migration to zol between r368473 and current 'main'
> >>> branch so
> >>>> I decided to install fresh 14-current from snapshot
> >>>> FreeBSD-14.0-CURRENT-amd64-20211202-610d908f8a6-251253 in order to
> >> avoid
> >>>> possible problems
> >>>>
> >>>> and again, after make kernel and reboot OS runs, but after
> installworld
> >>> I ended up in the same situation
> >>>>
> >>>> thoughts ?
> >>>>
> >>>> --
> >>>> wbr, Sergey
> >>>>
> >>>>
> >>>
> >>> Bootcode should be updated.
> >>> The procedure you wrote doesn't seem to update it.
> >>>
> >>
> >> The posted error is one you get when you can't read the filesystem,
> which
> >> is why you need to update
> >> boot blocks across the OpenZFS change.
> >>
> >> Warner
> >>
>
>