[Bug 235181] mrsas(4): PERC330 card as HBA - driver detects drives as SATA when they are SATA 3

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=235181

--- Comment #8 from Michael Osipov <michaelo@FreeBSD.org> ---
From proprietary storcli:
Drive /c0/e16/s0 Device attributes :
==================================
SN = 6XS2W2A90000B2359TS3
Manufacturer Id = SEAGATE
Model Number = ST9900805SS
NAND Vendor = NA
WWN = 5000C500548B2B5C
Firmware Revision = 5101
Firmware Release Number = 05209303
Raw size = 838.363 GB [0x68cb9e30 Sectors]
Coerced size = 837.843 GB [0x68bb0000 Sectors]
Non Coerced size = 837.863 GB [0x68bb9e30 Sectors]
Device Speed = 6.0Gb/s
Link Speed = 6.0Gb/s
Write Cache = N/A
Logical Sector Size = 512B
Physical Sector Size = 512B
Connector Name = Port 0 - 3 & Port 4 - 7


Drive /c0/e16/s0 Policies/Settings :
==================================
Enclosure position = 1
Connected Port Number = 0(path0)
Sequence Number = 2
Commissioned Spare = No
Emergency Spare = No
Last Predictive Failure Event Sequence Number = 0
Successful diagnostics completion on = N/A
FDE Type = None
SED Capable = No
SED Enabled = No
Secured = No
Cryptographic Erase Capable = No
Sanitize Support = Not supported
Locked = No
Needs EKM Attention = No
PI Eligible = No
Drive is formatted for PI = No
PI type = No PI
Number of bytes of user data in LBA = 0 KB
Certified = No
Wide Port Capable = No
Multipath = No

Port Information :
================

-----------------------------------------
Port Status Linkspeed SAS address
-----------------------------------------
   0 Active 6.0Gb/s   0x5000c500548b2b5d
   1 Active 6.0Gb/s   0x0
-----------------------------------------

-- 
You are receiving this mail because:
You are the assignee for the bug.