[Bug 289748] ahci driver not attached on New supermicro board H13SSW in at least 14.3 and CURRENT

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=289748

--- Comment #10 from Andriy Gapon <avg@FreeBSD.org> ---
(In reply to Vitalij Satanivskij from comment #4)
Just for easier reading, copying this from the attachment:
none0@pci0:226:0:0:     class=0x010601 rev=0x93 hdr=0x00 vendor=0x1022
device=0x7901 subvendor=0x15d9 subdevice=0x1c85
    vendor     = 'Advanced Micro Devices, Inc. [AMD]'
    device     = 'FCH SATA Controller [AHCI mode]'
    class      = mass storage
    subclass   = SATA
    bar   [24] = type Memory, range 32, base 0xc5201000, size 2048, enabled
    cap 09[48] = vendor (length 8)
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[64] = PCI-Express 2 endpoint max data 128(256) RO NS
                 max read 512
                 link x16(x16) speed 32.0(32.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 16 messages, 64 bit 
    cap 11[c0] = MSI-X supports 1 message
                 Table in map 0x10[0x0], PBA in map 0x10[0x0]
    cap 12[d0] = SATA Index-Data Pair
    ecap 000b[100] = Vendor [1] ID 0001 Rev 1 Length 16
                 0b 00 01 15 01 00 01 01 00 00 00 00 00 00 00 00
    ecap 0001[150] = AER 2 0 fatal 0 non-fatal 1 corrected
    ecap 0019[270] = PCIe Sec 1 lane errors 0
    ecap 0026[410] = Physical Layer 16.0 GT/s 1
    ecap 0027[450] = Lane Margining at Receiver 1
    ecap 002a[500] = Physical Layer 32.0 GT/s 1

-- 
You are receiving this mail because:
You are the assignee for the bug.