[Bug 268229] Logical drives regression with mpr(4) driver
- In reply to: bugzilla-noreply_a_freebsd.org: "[Bug 268229] Logical drives regression with mpr driver"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 17 Apr 2023 07:38:56 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=268229
cin_nev@mail.ru changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |cin_nev@mail.ru
--- Comment #4 from cin_nev@mail.ru ---
RELENG-12.3 not support, but I can not upgrade to RELENG-12.4, because I have
got same issue after upgrade to RELENG-12.4. What can I do to solve this issue?
Information about hardware (commands ran on RELENG-12.3):
root@host:~ # mprutil show all
Adapter:
mpr0 Adapter:
Board Name: Asus SAS3008
Board Assembly:
Chip Name: LSISAS3008
Chip Revision: ALL
BIOS Revision: 8.35.00.00
Firmware Revision: 15.00.04.00
Integrated RAID: yes
SATA NCQ: ENABLED
PCIe Width/Speed: x8 (8.0 GB/sec)
IOC Speed: Full
Temperature: 53 C
PhyNum CtlrHandle DevHandle Disabled Speed Min Max Device
0 0001 0009 N 6.0 3.0 12 SAS Initiator
1 0002 000a N 6.0 3.0 12 SAS Initiator
2 0003 000b N 6.0 3.0 12 SAS Initiator
3 0004 000c N 6.0 3.0 12 SAS Initiator
4 N 3.0 12 SAS Initiator
5 N 3.0 12 SAS Initiator
6 N 3.0 12 SAS Initiator
7 N 3.0 12 SAS Initiator
Devices:
B____T SAS Address Handle Parent Device Speed Enc Slot Wdt
00 02 4433221100000000 0009 0001 SATA Target 6.0 0001 00 1
00 03 4433221101000000 000a 0002 SATA Target 6.0 0001 01 1
00 04 4433221102000000 000b 0003 SATA Target 6.0 0001 02 1
00 05 4433221103000000 000c 0004 SATA Target 6.0 0001 03 1
Enclosures:
Slots Logical ID SEPHandle EncHandle Type
08 500112f950000f70 0001 Direct Attached SGPIO
Expanders:
NumPhys SAS Address DevHandle Parent EncHandle SAS Level
root@host:~ # dmesg | grep mpr0
mpr0: <Avago Technologies (LSI) SAS3008> port 0x6000-0x60ff mem
0x94240000-0x9424ffff,0x94200000-0x9423ffff irq 16 at device 0.0 on pci1
mpr0: Firmware: 15.00.04.00, Driver: 23.00.00.00-fbsd
mpr0: IOCCapabilities:
6985c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR,MSIXIndex,FastPath,RDPQArray>
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009>
enclosureHandle<0x0001> slot 0
mpr0: At enclosure level 0 and connector name ( )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a>
enclosureHandle<0x0001> slot 1
mpr0: At enclosure level 0 and connector name ( )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000b>
enclosureHandle<0x0001> slot 2
mpr0: At enclosure level 0 and connector name ( )
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000c>
enclosureHandle<0x0001> slot 3
mpr0: At enclosure level 0 and connector name ( )
da0 at mpr0 bus 0 scbus0 target 0 lun 0
da1 at mpr0 bus 0 scbus0 target 1 lun 0
root@host:~ # dmesg | grep da0
Trying to mount root from ufs:/dev/da0p2 [rw]...
da0 at mpr0 bus 0 scbus0 target 0 lun 0
da0: <LSI Logical Volume 3000> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 3978164406233064500
da0: 150.000MB/s transfers
da0: Command Queueing enabled
da0: 456809MB (935544832 512 byte sectors)
--
You are receiving this mail because:
You are the assignee for the bug.